Urbanti TPX rapid funnels
Glass-clear. For high-speed filtration. The internal helicoid ribs to increase the filtration speed.Polymethylpentene plasticVertical outer ribs prevent airlockAutoclavableUnaffected by corrosive liquidsHeat resistant to 177 ºC
Utility Carriers Nalgene™
For carrying glassware, samples or tools. Resilient construction with molded-in center divider and handle.
Vacuum Tubing Tygon® E-3603
Transparent and flexible. Autoclavable. Shore A 56. Suitable for peristaltic pumps, for condensers, incubators, desiccators, gas lines and drain lines and for food and beverage dispensing. Resistant to most laboratory chemicals. Meets FDA and USP class VI. Supplied per meter.Temperature range -46 °C to 74 °CVacuum range 760 mm at 23 °C to 685 mm at 60 °CGood tensile and tear strengthSmooth inner surfaceContains no BPA or phthalates
Vacuum Tubing, Silicone
Silicone rubber (VMQ), transparent, hardness 60 Shore A, food grade, temperature-resistant from -60 to +200 °C (short term up to +260 °C), suitable for peristaltic pumps. BFR XV, FDA CFR 21 õ 177.2600, EP-Europ. Pharmacopoeia / DAB, biocompatibility: Cytotoxicity (USP Class 1-6), Hemolysis, Pyrogenicity, Sensitization, Dermatological Irritation, Implantation (90 days) according to ISO 10993-1. Supplied per meter.
Vacuum tubings Nalgene™ 180, PVC
Clear. Resists full vacuum (80 mmHg) at room temperature.Suitable for foodUSP Class VI
Venting valves
The venting valves let air into the containers in order to prevent a vacuum.
Vernier caliper gauge
DIN 862. Stainless steel, hardened. Scale marked in black. With thumb-wheel and locknut in main slider. With continous adjustment. Gauge length 150mm, jaw depth 45mm, fine scale division 0.1mm. Supplied in imitation leather case.
Vernier calliper gauge, digital
Stainless steel, with 5 digit LCD display. Accuracy ± 0.03mm, resolution 0.01mm. Switchable between metric/imperial. 3V CR2032 lithium battery not included.
Vibro spatula
Teflon-coated vibration scoop with acid-proof plastic handle. Extra thin working part for fine dosing.
Vinyl label tape for label printer M210/M210-LAB
Label cartridges consisting of ribbon and label tape for general laboratory labelling purposes. Suitable for indoor and outdoor use.
VITgrip™ lab bottles, PP, GL 45
Allround lab bottle made of polypropylene, with GL 45 thread and supplied with tamper-evident closure (PP).Excellent handling due to innovative design. In contrast to common lab bottles, the slim, waisted shape facilitates the handling of the VITgrip™ to a considerable degree. The molded volume graduations support slip-safety while working with glovesLeakproof** due to optimized sealing system of the bottle thread and the screw cap with ergonomic designEasy readability of the volume at all times due to molded, double-sided graduations with high accuracy (± 5%)Smooth pouring of liquids and easy to clean due to hydrophobic material and rounded shape without dirt catching edgesWith tamper-evident closure that reliably signals, if the bottle is still sealedAutoclavable at 121°C (2 bar) according to DIN EN 285Very good chemical resistance against most acids, bases and alcoholic solutions. Furthermore, the VITgrip™ lab bottles and the supplied VITLAB® tamper-evident closures are suitable for contact with foodstuffs (according to regulation EU No. 10/2011).**The VITgripTM lab bottles are leakproof (tested with distilled water at room temperatur and atmospheric pressure and in combination with the supplied VITLAB® screw closures. Please contact us for the detailed test conditions, if required.
VITsafe™ Safety wash bottles, narrow neck, PP/LDPE
Bottles made from LDPE, spray tube from PP. Safer due to the durable safety imprint in accordance to Directive (EC) No. 1272/2008 (GHS), as well as with all important information: Material name in German, English, French and Spanish, Chemical formula, CAS No., hazard pictogram, signal word, Risk phrases (H phrases), safety phrases (P phrases), as well as NFPA Code. Precise spray jet and optimised medium backflow through the continuous and finely drawn tip of the spray tube. Practically no leakage or dripping with the VENT-CAP screw cap, the design of which prevents almost all static overpressure.
VITsafe™ safety wash bottles, wide-mouth, PP/LDPE
LDPE or PP Bottles, PP spray tube. Safer due to the durable safety imprint in accordance to Directive (EC) No. 1272/2008 (GHS), as well as with all important information: Material name in German, English, French and Spanish, Chemical formula, CAS No., hazard pictogram, signal word, Risk phrases (H phrases), safety phrases (P phrases), as well as NFPA Code. Precise spray jet and optimised medium backflow through the continuous and finely drawn tip of the spray tube. Practically no leakage or dripping with the VENT-CAP screw cap, the design of which prevents almost all static overpressure.
Wash bottle caps VENT-CAP, PP
No leakage or dripping with the VENT-CAP screw cap, the design of which prevents almost all static overpressure.
Wash Bottle Carrier, PP
Convenient storage and transport of up to six wash bottlesMoulded in rugged and lightweight polypropyleneAutoclavable at 121°CChemical and corrosion resistantSecure handleHolds 250ml or 500ml bottlesAperture diameter 74mmDimensions (W x D x H): 286 x 194 x 225mm.
Wash bottles Nalgene™ Type 2405, PPCO
Transparent bottle made of PPCO. Blue screw cap made of PP and suction tube support moulded as one piece. Leakproof.
Wash bottles Nalgene™, LDPE
LDPE bottle and suction tube. PP screw cap and suction tube support moulded as one piece .
Wash bottles, Azlon®, LDPE
Transparent. With precision jet-tip aperture for fine control. Closure made of PP.
Wash bottles, LDPE
Transparent. Swan-neck jet produces a straight spray.Immersion tube can be pulled upFood safe
Wash bottles, LDPE
Transparent. Ergonomic, hexagonal shape, with integral spout for exact liquid dispensing.
Wash bottles, LDPE
Yellow transparent, with light protectionSafe filling due to wide-necked opening