Tripod bracket for Infrared burner PowerCube IRB 1 / IRB 2
Tripod bracket for mounting the PowerCube into a tripod stand. With stainless steel rod approx. 13cm long.
Tripod retort stand bases, steel
Highly stable laboratory stand due to the steel tripod base which is stove enamel coated. With an M10 threaded hole in the middle. Rubber support feet prevents the stand from sliding. Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".
Tripod stand
Zinc-plated steel. With circular top and flared legs.Zinc plating of tripod stands serves as temporary corrosion protection. May peel off after direct contact with open burner flame.
Tripod stand
Chrome plated steel. Tripods are meant to be used in conjunction with wire gauze, triangles or a sand bath. Holding ring with 150 mm diameter can be reduced to 125 mm with the supplied reducement attachment.
Tripod stand, with adjustable height
Chrome plated steel. Tripods are meant to be used in conjunction with wire gauze, triangles or a sand bath. Holding ring with 150 mm diameter can be reduced to 125 mm with the supplied reducement attachment. Adjustable height from 200 up to 300 mm.
Tripod stands, stainless steel
Remanit 4301. Dismountable. Stainless steel feet.
Tripods, malleable cast iron
Made of zincked malleable cast iron. Feet can be unscrewed.
TRIZETTE® - Magnifier tweezer with LED light
Extra bright LED light to be switched on when neededApprox. 3,2 cm big plastic lens for 4-fold magnificationDelivery on blister card. 3 button cell batteries (LR44) incl.
Tube clamp, plated
Ideal for handling hot tubes or to heat test tubes up to 30 mm diameter. Manufactured from stainless steel with a finger grip. With a long arm for better handling and to avoid close contact between fingers and the flame. High resistance to heat up to 100°C.
Tube connectors, PP, straight
For connecting elastic tubes.Temperature resistant from 0 to 110 °CGood chemical resistance
Tube Rack Adapt-a-Rack™, POM
Capable of holding different size tubes in each available slot as the well literally adapts to your tube size to hold firming in an upright position. The design enables you to hold 12 to 30mm (5 to 50ml) tubes simultaneously and still allow full viewing of the tube label. Racks can be linked together for additional holding capacity. Autoclavable. Dimensions (W x D x H): 181 x 56 x 76mm
Tube Rack for 5ml centrifuge tubes, PP
Designed specifically for 40 x 5 ml centrifuge tubes this rack will also accommodate other tubes with a diameter of 13 to 16 mm. Made of durable and corrosion resistant white polypropylene. End plates have handles for easy transport and stackingSteam autoclavable at 121 °CDimensions (L x W x H): 260 x 113 x 105 mmRows: 4 x 10
Tube Rack OneRack® Multi
Tube rack with interchangeable inserts for a wide range of tube types with diameters from 10 to 30 mm. The inserts can be pivoted to either an upper or lower position to accommodate tubes of various heights. Autoclavable.Suitable for tubes from 5 to 50 mlAngled position of the inserts for comfortable pipettingThe open design allows a very good view of the graduation and the filling level of the vesselsUnique shape of the wells (teardrop design) ensures that the vessels stand particularly firmlyAlphanumeric position markingErgonomic handlesScope of supply: 1 x base, 6 x inserts (2 x Ø 10 to 13 mm, 2 x Ø 13 to 17 mm, 2 x Ø 25 to 30 mm)
Tube Rack Origami, PP
The Origami Tube Rack is designed to be height adjustable which makes it very flexible and usable for almost any test tube on the market. Depending on the hole diameter the racks can be used for microcentrifuge tubes, cryovials, vacutainers, and 15ml and 50ml falcon tubes. The Origami Tube Rack has a printed alphanumeric grid for easy location of the samples. It is made of polypropylene and can be used in temperatures from -45 °C to 60 °C. Best choice for mobile Labs. After usage demount it and store it in a drawer.
Tube Rack pop-up™, foldable, PP
Robust polypropylene construction. Simple, easy to open and close. Flatten for compact storage. Pops up for instant use. Expand and collapse when racks are needed. Printed grid aids rapid retrieval. Stack racks in open or closed position. Saves space when racks are not in use. Not recommended for steam sterilisation. Dimensions (W x D x H): 255 x 137 x 72mm when expanded, 21 mm high when collapsed.
Tube Rack pop-up™, foldable, PP, for 2 tube sizes
Robust polypropylene construction. Simple, easy to open and close. Flatten for compact storage. Pops up for instant use. Expand and collapse when racks are needed. Printed grid aids rapid retrieval. Stack racks in open or closed position. Saves space when racks are not in use. Not recommended for steam sterilisation. Dimensions (W x D x H): 255 x 137 x 72 mm when expanded, 21 mm high when collapsed. The tube rack holds 21 x 15 ml and 12 x 50 ml tubes.
Tube Rack Rota-Rack®, PP
Interlocked racks. Rotate each of the four modules independently. Use several sizes of test tubes, culture tubes, centrifuge tubes or microcentrifuge tubes at the same time. Autoclavable.Each module holds:2 x 50 ml tubes, 8 x 10-15 ml tubes, 6 x 15-20 ml tubes or 10 x 10-13 ml tubes
Tube Rack Rota-Rack®, PP, for micro tubes
Interlocked racks. Rotate each of the four modules independently. Use several sizes of test tubes, culture tubes, centrifuge tubes or microcentrifuge tubes at the same time. Autoclavable.Each module holds:6 x 15 ml tubes, 9 x 1.5 ml tubes, 12 x 0.5 ml tubes or 32 x 0.2 ml PCR tubes
Tube Rack with lid, PP , 2 side
For storage of micro tubes. Stand has two sides and each side accomodates different size and combination of microcentrifuge tubes. First side can hold 96 pieces of 1.5 ml tubes, and the other side holds 48 pieces of 0.5 ml tubes and also 96 pieces of 0.2 ml tubes. Supplied with a clear polypropylene lid which covers the rack and protects the tubes from dust and other effects. Alphanumerical index on tube rows enables easy identification of tubes.
Tube Rack, ABS
Made of "modified" high density ABS which enables the rack to be used in water baths. Racks can be linked together to form a multiple rack system. Rod type spacious tube compartments are ideal for screw cap tubes of 15 ml and 50 ml. Unique rack design enables perfect adaptance of the tubes and allows easy viewing of the tube contents. Pegs hold the tubes firmly in place and remain straight even after repeated autoclaving. Interlocking system for linking the racks in multiple rows.
Tube Rack, HDPE-coated steel
Chemically resistant racks for transport or sample handling. The product range includes racks for most vessel shapes. Accomodates vessels safely thanks to square wells and three holding levels. Mesh or slotted bottom prevent the sample vessels from falling through and enable the loaded rack to be transported. For use at temperatures from -40 to 121 °C. Autoclavable.
Tube rack, PP
Manufactured from high density polypropylene. Due to their weights, they do not float in the water baths, not even in agitated water. These racks are supplied dismantled and can be easily assembled . Autoclavable. A moulded-in alpha-numeric grid reference on the top tier of the rack allows easy sample identification.