Beakers, PMP (TPX®), low form
Conform to ISO 7056 - 1981 (E). Transparent, autoclavable. Will withstand 170 °C for short periods. Permanent graduations are moulded-in for reproducibility. Excellent chemical resistance.
Beakers, PMP (TPX®), low form
Crystal clear. Conforms to ISO 7056 - 1981 (E). Autoclavable. Will withstand 170°C for short periods. Permanent blue printed graduations. Excellent chemical resistance. Tolerance ± 10%.
Beakers, PP, low form
Transparente. With blue graduations. Acc. to ISO 7056. With graduation, beaded rim and spout. Cleaning at temperatures below 60 °C is recommended to preserve marks and inscriptions.
Beakers, PP, low form, blue graduations
Highly transparent. Autoclavable to 121 °C for 20 min. and can be used continuously at 100°C. Excellent chemical resistance. Tolerance ±10 %. Conform to ISO 7056 - 1981 (E).
Beakers, PP, low form, embossed graduations
Highly transparent. Autoclavable to 121 °C. Excellent chemical resistance. Conform to ISO 7056 - 1981 (E).
Beakers, Pyrex®, conical form
Conical shape (Phillips pattern) with spoutManufactured from Pyrex® borosilicate glassExcellent thermal performance and chemical resistance
Beakers, Quartz glass, tall form
DIN 12330. Transparent silica (Quartz glass). Tall form. With spout.
Beakers, stainless steel
Manufactured from high quality, chemical and corrosion resistant AISI 304 grade stainless steel. Robust seamless construction guarantees a long life cycle. Highly polished smooth interior enables much easier cleaning.
Beakers, stainless steel, with rim
Especialty: Contact bottom for heating plates and magnetic stirrers.
Beakers, stainless steel, with rim and handle
Especialty: Contact bottom for heating plates and magnetic stirrers.
Beakers, stainless steel, with rim and spout
Especialty: Contact bottom for heating plates and magnetic stirrers.
Beakers, stainless steel, with rim, spout and handle
Especialty: Contact bottom for heating plates and magnetic stirrers.
Beakers, tall form, Pyrex®
Complies with ISO 3819 and DIN 12331Manufactured from Pyrex® borosilicate glassTall form with spoutWhite graduations and marking spotPrinted with Trace Code for downloadable batch certificateBatch certificate available to download from www.scilabware.com
Bell caps for narrow-mouth reagent bottles, series 310, UN-approved
Tamper-evident ring, red, cup-shaped PTFE liner.
Bell caps for narrow-mouth reagent bottles, with degassing membrane, series 310, UN-approved
Tamper-evident ring, red, cup-shaped, perforated PTFE liner.
Bell jars, DURAN®
With ground joint neck, for vacuum use. Ground joint height: 50 mm.
Bench protection paper, LabSorb, rolls
LabSorb is two-layered: The top layer is a quality filter paper to enable rapid absorption of spilt liquids. The bottom layer is polyethylene-coated and protects the surface underneath from contamination and damage.Other formats and sizes are available on request.
Bench protection paper, LabSorb, sheets
LabSorb is two-layered: The top layer is a quality filter paper to enable rapid absorption of spilt liquids. The bottom layer is polyethylene-coated and protects the surface underneath from contamination and damage.Other formats and sizes are available on request.
Bench protector, Labmat™
White. Labmat™ Bench Liner speeds clean-up and safeguards work surfaces from stains, spills and wear. Highly absorbent upper surface. Flexible polyethylene film backing is non-skid and prevents soak-through of most solutions. Simply roll up and discard after contamination.
Bench protectors, PTFE
Ideal for using as table pad or for lining drawers. Also suitable for using as slideway or for insulation. White foil with universal chemical resistance, temperature resistance from -200 to 250 °C.Rolls of 1 m.
Benchkote surface protector®, Block à 50 sheets
The upper side consists of a particularly absorbent filter paper, the lower side is a non-permeable, chemically resistant PE layer. This combination makes Benchkote into a protective paper with a particularly high wet strength for universal use, helping to meet the requirements of Good Laboratory Practice (GLP):Completely absorbs escaped liquidsPrevents spills from reaching the workbenchProtects against contaminationApplications:Surface protection for lab workbenches, trays or chemical cabinetsContamination protection, e. g. in isotope or bacteriological labsAdsorption of toxic or radioactive substancesHygienic protection in animal cagesAtmospheric regulation in humidity chambers
Benchkote surface protector®, rolls
The upper side consists of a particularly absorbent filter paper, the lower side is a non-permeable, chemically resistant PE layer. This combination makes Benchkote into a protective paper with a particularly high wet strength for universal use, helping to meet the requirements of Good Laboratory Practice (GLP):Completely absorbs escaped liquidsPrevents spills from reaching the workbenchProtects against contaminationApplications:Surface protection for lab workbenches, trays or chemical cabinetsContamination protection, e. g. in isotope or bacteriological labsAdsorption of toxic or radioactive substancesHygienic protection in animal cagesAtmospheric regulation in humidity chambers
Benchkote surface protector®, sheets
The upper side consists of a particularly absorbent filter paper, the lower side is a non-permeable, chemically resistant PE layer. This combination makes Benchkote into a protective paper with a particularly high wet strength for universal use, helping to meet the requirements of Good Laboratory Practice (GLP):Completely absorbs escaped liquidsPrevents spills from reaching the workbenchProtects against contaminationApplications:Surface protection for lab workbenches, trays or chemical cabinetsContamination protection, e. g. in isotope or bacteriological labsAdsorption of toxic or radioactive substancesHygienic protection in animal cagesAtmospheric regulation in humidity chambers
Blowtorch Handyjet 2282, with piezo ignition
The powerful, wind-stable multi-purpose burner is suitable for soft soldering & brazing work, general heating work and paint removal. The burner preheats the gas before combustion and ensures an optimal flame pattern in all working positions, including overhead.
Boiling flasks, flat bottom, narrow neck, Pyrex®
Complies with ISO 1773Flat base for standing on benches and hotplates etc.Manufactured from Pyrex® glass for high resistance to thermal shockExcellent chemical durability for contamination-free performanceWith white enamel marking spot
Bosshead Alu-Maxi
The bosshead Alu-Maxi made of aluminium from USBECK offers a solution for rods with above-average diameters. The Alu-Maxi allows secure fixation of rods up to Ø 19 mm on one side and up to Ø 24 mm on the other side.Made of powder-coated aluminiumSuitable for rods and attachments up to Ø 19 mm and Ø 24 mmEquipped with nickel-plated brass wing screws
Bosshead EasySlide for one-hand operation
The EasySlide bosshead is revolutionizing laboratory setups: thanks to an integrated ball bearing, the bosshead glides smoothly along the rod, even during fine adjustments. Its innovative design allows for quick, comfortable, and secure one-handed operation, making height adjustments significantly more efficient and ergonomic.The large, easy-to-grip knurled aluminium screws can be firmly tightened without tools, ensuring long-term reliable fixation, even with frequent repositioning.Sturdy and lightweight aluminium alloySuitable for fixation of rods up to Ø 12 mmThe bosshead itself mounts on a Ø 12 mm rod where it is flexibly height-adjustableMaintenance-free internal plastic ball bearing for exceptionally smooth slidingOne-handed operation – clamp can be positioned and locked effortlessly with one handLarge aluminium knurled screws for secure, tool-free tightening
Bosshead MicroFix Aluminium with hex socket screws
The MicroFix bosshead, made from high-quality aluminium, offers a particularly space-saving and stable connection solution for right-angled or T-joint connections of two rods with diameters up to 13 mm. Ideal for use in tight installation environments, such as under laboratory fume hoods or as an addition to existing rack systems. The hex socket set screws can be tightened using an Allen key and minimize space requirements to an absolute minimum.Sturdy and lightweight aluminium alloyRight-angle or T-connection of two rods up to Ø 13 mmUltra-compact dimensions: 25 mm diameter, 30 mm lengthwith 2 threaded pins with hexagon socket made from stainless steel
Bosshead MicroFix Aluminium with knurled screws
The MicroFix bosshead, made from high-quality aluminium, offers a particularly space-saving and stable connection solution for right-angled or T-joint connections of two rods with diameters up to 13 mm.Ideal for use in tight installation environments, such as under laboratory fume hoods or as an addition to existing rack systems.The ergonomic knurled screws allow for quick and reliable hand-tightening. For applications requiring increased security, the screws feature an integrated internal hex socket and can be additionally tightened with a 3 mm Allen key.Sturdy and lightweight aluminium alloyRight-angle or T-connection of two rods up to Ø 13 mmUltra-compact dimensions: 25 mm diameter, 30 mm lengthAluminium knurled screws for tool-free manual fasteningAdditional safety option: integrated 3 mm hex socket in the screw head for optional tightening with an Allen key
Bosshead MicroFix stainless steel with hex socket screws
The new MicroFix bosshead from USBECK, made from corrosion resistant stainless steel, offers a particularly space-saving and stable connection solution for right-angled or T-joint connections of two rods with diameters up to 13 mm.Ideal for use in tight installation environments, such as under laboratory fume hoods or as an addition to existing rack systems.The hex socket set screws can be tightened using an Allen key and minimize space requirements to an absolute minimum.Made of stainless steel: corrosion-resistant and durableRight-angle or T-connection of two rods up to Ø 13 mmUltra-compact dimensions: 25 mm diameter, 30 mm lengthwith 2 threaded pins with hexagon socket made from stainless steel
Bosshead MicroFix stainless steel with knurled screws
The MicroFix bosshead, made from high-quality aluminium, offers a particularly space-saving and stable connection solution for right-angled or T-joint connections of two rods with diameters up to 13 mm.Ideal for use in tight installation environments, such as under laboratory fume hoods or as an addition to existing rack systems.The ergonomic knurled screws allow for quick and reliable hand-tightening. For applications requiring increased security, the screws feature an integrated internal hex socket and can be additionally tightened with a 3 mm Allen key.Made from stainless steel: corrosion resistant and durableRight-angle or T-connection of two rods up to Ø 13 mmUltra-compact dimensions: 25 mm diameter, 30 mm lengthAluminium knurled screws for tool-free manual fasteningAdditional safety option: integrated 3 mm hex socket in the screw head for optional tightening with an Allen key
Bosshead, 18/10 steel, angle 90°
To DIN 12895. Material number 4301. Electrolytically polished, with heart screw.
