Laboratory mat from PTFE
Diamond-shaped PTFE mesh sheeting is 1.6 mm thick with 6 mm openingsCorrosion and break-resistant liningUseful as mesh bag for dipping parts in corrosive chemicals and solventsEasy to clean
Laboratory mats Workstation Lab Mat, silicone
Non-slip Laboratory mats with 2 different sides for organising and thus simplyfying workflow processes. One side with a completely flat surface and one side with a combination of gridded and flat surface. The gridded area avoids unwanted movement of small partsIdeal for all laboratories and more specialised areas such as cold rooms or areas with high sterility requirements such as clean rooms. Dimensions (W x D x H): 305 x 379 x 2 mmProtection of the work bench from hot items up to 200 °CLip around the edge can hold approx. 250 ml of liquidReusableChemically resistantDishwasher safeFood safeNoise dampeningCan be rolled upAutoclavable at 121 °C for 15 minutes
Laboratory mats, silicone
The lab mats are an economical solution to help keep benchtops clean and safe from stains, spills and wear. Stain resistant washable surface, which can easily be cleaned using any standard disinfectant and is even autoclavable at 121 °C for 15 minutes. The mat can also be rolled up for compact storage. This lab mats can be used with instruments such as centrifuges, vortex mixers, stirrers, and so much more. It offers a large working surface. Food-safe.Anti-skid, which helps to keep items with harsh chemicals and delicate glassware in placeNoise dampening, reducing sound from the vibration of common benchtop equipment.Area with internal metal inserts to store magnet bars from magnetic stirrersLip design around the outer edge, that helps contain spillage that may occur when in useProtects countertops from hot items up to 200 °C
Laboratory mats, silicone
Non-slipWithstands temperatures up to 260 °CAvailable in black or red
Laboratory notebooks, A4
Pages of paper with thread stitching. With easy-to-clean, waterproof polyethylene cover.
Laboratory notebooks, Nalgene™, 6300-1000
Durable, bound notebooks for laboratory recordings. With pre-printed fields for signatures and other data. With 100 water and chemical resistant, numbered pages. Squared, with black PE cover. Page size 235 x 286 mm. Suitable for ballpoint pens and permanent markers.
Laboratory notebooks, Nalgene™, 6301-1000
Durable, bound notebooks for laboratory recordings. With pre-printed fields for signatures and other data. With 96 squared paper pages. Green, waterproof cover made of PE.
Laboratory pots (baths) with lid
18/10 stainless steel. For boiling and simple water bath applications. With side handles and lid.
Laboratory scissors, stainless steel, with plastic handle
Made of stainless steel 1.4016. With one sharp and one round tip.
Laboratory stand
Same rod can be placed either at the centre or at the rear of the base offering multi advantages. White base colour guarantees perfect visual observation of colour changes during titration applications.Rectangular base made of ABS.Delivered complete with a screw-in M10 support rod of 600 mm height
Laboratory threaded joints - GL 14 / 18 / 25
Enables GL threads to clamp easily to fluoroplastic or thick-walled tubing made out of other plastics, glass or metal. (Ideally suited for connection with Bola GL fittings, Bola pressure valves, Bola GL taps and Bola GL ball valves).The laboratory threaded joints consist of a red screw cap made of glass-fibre reinforced ETFE, a sealing disc and a tapered sealing ring made of PTFE, as well as a V-ring made of glass-fibre reinforced ETFE. This patented system withstands pressures up to approx. 10 bar, is suitable for a vacuum (at room temperature in the case of sizes 14 to GL25) and is easy to assemble without tools. The substance that passes through only comes in contact with PTFE.Bola laboratory threaded joints can, for example, be used to hold probes (including stainless steel probes), sensors, laboratory taps, submerged tubes, thermometers or as a cable feed.
Laboratory threaded joints, GL 14
Connecting equipment and fittings with GL threads with hard-walled tubing or tubes made of glass, plastic or metal. Fixing probes, thermometers, dip tubes or cables in reaction vessels. Black screw caps made of PPS, inner parts consisting of a v-ring (PPS), a tapered ring and a sealing ring (both PTFE) as well as an o-ring (FKM) for tubing diameters under 3 mm (not exposed to the medium). Good chemical resistance, the medium is only exposed to PTFE. Temperature resistant from -50 to 250 °C, pressure stable up to 10 bar, suitable for vacuum.Connecting equipment and fittings with GL threads with hard-walled tubing or tubes made of glass, plastic or metal. Fixing probes, thermometers, dip tubes or cables in reaction vessels. Black screw caps made of PPS, inner parts consisting of a v-ring (PPS), a tapered ring and a sealing ring (both PTFE) as well as an o-ring (FKM) for tubing diameters under 3 mm (not exposed to the medium). Good chemical resistance, the medium is only exposed to PTFE. Temperature resistant from -50 to 250 °C, pressure stable up to 10 bar, suitable for vacuum.
Laboratory threaded joints, GL 18
Connecting equipment and fittings with GL threads with hard-walled tubing or tubes made of glass, plastic or metal. Fixing probes, thermometers, dip tubes or cables in reaction vessels. Black screw caps made of PPS, inner parts consisting of a v-ring (PPS), a tapered ring and a sealing ring (both PTFE) as well as an o-ring (FKM) for tubing diameters under 3 mm (not exposed to the medium). Good chemical resistance, the medium is only exposed to PTFE. Temperature resistant from -50 to 250 °C, pressure stable up to 10 bar, suitable for vacuum.Connecting equipment and fittings with GL threads with hard-walled tubing or tubes made of glass, plastic or metal. Fixing probes, thermometers, dip tubes or cables in reaction vessels. Black screw caps made of PPS, inner parts consisting of a v-ring (PPS), a tapered ring and a sealing ring (both PTFE) as well as an o-ring (FKM) for tubing diameters under 3 mm (not exposed to the medium). Good chemical resistance, the medium is only exposed to PTFE. Temperature resistant from -50 to 250 °C, pressure stable up to 10 bar, suitable for vacuum.
Laboratory threaded joints, GL 25
Connecting equipment and fittings with GL threads with hard-walled tubing or tubes made of glass, plastic or metal. Fixing probes, thermometers, dip tubes or cables in reaction vessels. Black screw caps made of PPS, inner parts consisting of a v-ring (PPS), a tapered ring and a sealing ring (both PTFE) as well as an o-ring (FKM) for tubing diameters under 3 mm (not exposed to the medium). Good chemical resistance, the medium is only exposed to PTFE. Temperature resistant from -50 to 250 °C, pressure stable up to 10 bar, suitable for vacuum.Connecting equipment and fittings with GL threads with hard-walled tubing or tubes made of glass, plastic or metal. Fixing probes, thermometers, dip tubes or cables in reaction vessels. Black screw caps made of PPS, inner parts consisting of a v-ring (PPS), a tapered ring and a sealing ring (both PTFE) as well as an o-ring (FKM) for tubing diameters under 3 mm (not exposed to the medium). Good chemical resistance, the medium is only exposed to PTFE. Temperature resistant from -50 to 250 °C, pressure stable up to 10 bar, suitable for vacuum.
Laboratory threaded joints, GL 32
Connecting equipment and fittings with GL threads with hard-walled tubing or tubes made of glass, plastic or metal. Fixing probes, thermometers, dip tubes or cables in reaction vessels. Black screw caps made of PPS, inner parts consisting of a v-ring (PPS), a tapered ring and a sealing ring (both PTFE) as well as an o-ring (FKM) for tubing diameters under 3 mm (not exposed to the medium). Good chemical resistance, the medium is only exposed to PTFE. Temperature resistant from -50 to 250 °C, pressure stable up to 10 bar, suitable for vacuum.Connecting equipment and fittings with GL threads with hard-walled tubing or tubes made of glass, plastic or metal. Fixing probes, thermometers, dip tubes or cables in reaction vessels. Black screw caps made of PPS, inner parts consisting of a v-ring (PPS), a tapered ring and a sealing ring (both PTFE) as well as an o-ring (FKM) for tubing diameters under 3 mm (not exposed to the medium). Good chemical resistance, the medium is only exposed to PTFE. Temperature resistant from -50 to 250 °C, pressure stable up to 10 bar, suitable for vacuum.
Laboratory threaded joints, GL 45
Connecting equipment and fittings with GL threads with hard-walled tubing or tubes made of glass, plastic or metal. Fixing probes, thermometers, dip tubes or cables in reaction vessels. Black screw caps made of PPS, inner parts consisting of a v-ring (PPS), a tapered ring and a sealing ring (both PTFE) as well as an o-ring (FKM) for tubing diameters under 3 mm (not exposed to the medium). Good chemical resistance, the medium is only exposed to PTFE. Temperature resistant from -50 to 250 °C, pressure stable up to 10 bar, suitable for vacuum.Connecting equipment and fittings with GL threads with hard-walled tubing or tubes made of glass, plastic or metal. Fixing probes, thermometers, dip tubes or cables in reaction vessels. Black screw caps made of PPS, inner parts consisting of a v-ring (PPS), a tapered ring and a sealing ring (both PTFE) as well as an o-ring (FKM) for tubing diameters under 3 mm (not exposed to the medium). Good chemical resistance, the medium is only exposed to PTFE. Temperature resistant from -50 to 250 °C, pressure stable up to 10 bar, suitable for vacuum.
Laboratory tool box
12 piece ring/open end spanner set: 1 piece each in sizes 6mm to 15mm, 17mm and 19mm. Knipex 180mm combination pliers. Knipex 240mm water pump pliers. FLEX-DOT screwdriver set: 1 slotted screwdriver each in sizes 8.0 x 1.2mm - 5.5 x 1.0mm and 3.0 x 0.5mm. 1 Phillips screwdriver, size 2. Including two stubby screwdrivers: 1 size 2 Phillips screwdriver and 1 slotted screwdriver 5.5 x 1.0mm. Automotive light tester with cable and crocodile clip (for automotive electrical systems only).Sockets, sizes 8mm - 10mm - 12mm - 13mm - 14mm - 15mm - 17mm - 19mm - 22mm and 24mm. Reversible ratchet. Universal joint. 1 each 125mm and 250mm extensions. Long T-handle with slide (for loosening wheel nuts). Special 16mm and 21mm spark plug sockets with ball head on longer side. Pocket Allen key set (8 piece set) from 1.5 - 8.0mm. PROXXON ball-peen hammer (300g), ground on all sides and partially polished. With inseparable graphite handle (fibre-glass reinforced, non-slip soft coating in grip area) for unparalleled vibration damping.
Laboratory tray LaboPlast®, set large, PP
White. Multi-purpose trays. Mechanically resistant, shatterproof, durable, stackable and hygienic. Food Safe. Easy to clean. Resistant to many acids and alkaline solutions. Strong rounded rim. Polished surface. Made by injection moulding.One tray each with internal dimensions 130 x 180, 180 x 240, 240 x 300, 300 x 400, 400 x 500 and 500 x 700 mm.
Laboratory tray LaboPlast®, set small, PP
White. Multi-purpose trays. Mechanically resistant, shatterproof, durable, stackable and hygienic. Food Safe. Easy to clean. Resistant to many acids and alkaline solutions. Strong rounded rim. Polished surface. Made by injection moulding.One tray each with internal dimensions 130 x 180, 180 x 240, 240 x 300 and 300 x 400 mm.
Laboratory trays LaboPlast®, PP
White multi-purpose trays. Injection-moulded. Durable and resist flexing, with strong, rounded rim. Stackable and hygienic. Surface is easy-to-clean. Resistant to many acids and alkaline solutions. Food-safe. Temperature resistant up to 60 °C.
Laboratory trays Nalgene™, PP
Versatile tray. Suitable for cleaning and autoclaving soiled laboratory items. Rolled edges provide additional stability.With molded handlesStackableAutoclavable