Test tube cleaners, rubber
For removing heavy soiling from test tubes by scraping. With 5 mm boring for rod.
Test tube holders, wood
Hardened wood test tube holders with steel spring. Total length 180mm and hold tubes up to 25mm.
Test tube rack, plastic coating
Test tube rack with white plastic coating, temporarily resistant up to 150 °C with 2 compartments, base made of welded mesh w 8 mmNumber of compartments: 3 x 12Rack height: 70 mmCompartment size: 18 x 18 mm (up to Ø 16 mm)
Test tube rack, PP
PP. For all common test tube diameters. Very sturdy design. All openings are widely spaced apart to accommodate screw cap tubes. All racks have the same footprint and can be stacked easily when empty. Modified PP with greater density than water makes them ideal for use in water baths. Large marking area (60 x 12mm) for barcode labels and alphanumeric references for clear sample identification. Racks are supplied in three parts for quick and permanent assembly. Continuous use temperature -20 to 90 °C. Autoclavable at 121 °C (2 bar), according to DIN EN 285. Choice of colours as outlined below.
Test tube rack, PP
PP. For all common test tube diameters. Very sturdy design. All openings are widely spaced apart to accommodate screw cap tubes. All racks have the same footprint and can be stacked easily when empty. Modified PP with greater density than water makes them ideal for use in water baths. Large marking area (60 x 12mm) for barcode labels and alphanumeric references for clear sample identification. Racks are supplied in three parts for quick and permanent assembly. Continuous use temperature -20 to 90 °C. Autoclavable at 121 °C (2 bar), according to DIN EN 285. Choice of colours as outlined below.
Test tube rack, PP, "monoblock"
Blue. Manufactured from high density polypropylene. Moulded-in alpha numeric grid reference on the top tier of the rack allows easy sample identification. Due to their weights, they do not float in the water baths. Autoclavable.
Test tube rack, PTFE
Good chemical resistanceOperating temperature -200 to 250 °C
Test tube racks
For 15 ml test tubes. 3-tier design.White nylon coated or polished stainless steel wire.Second tier approximately 40mm high.
Test Tube Racks Mega Rack®, ABS
Stores a high quantity of samples eliminating the need for multiple racksAlphanumeric grid for quick location and retrieval of tubesSturdy, lightweight material for easy transport
Test Tube Racks Mega Rack®, PP
Stores a high quantity of samples eliminating the need for multiple racksAlphanumeric grid for quick location and retrieval of tubesSturdy, lightweight material for easy transport
Test Tube Racks Nalgene™ Unwire™, PP
Hold a full load of test tubes or centrifuge tubes with Polypropylene Test Tube Racks, molded in one piece using ResMer™ manufacturing technology.Higher specific gravity than water so rack stays submerged in a water bathHolds a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30 mm sizes or up to 72 smaller diameter tubesAvailable in four bright colors to help keep samples organizedAccepts large labels for easy sample identification
Test tube racks Nalgene™, acetal plastic
Thermo Scientific™ Nalgene™ Unwire™ test tube racks manufactured with Resmer™ Manufacturing Technology. 3-tier grid design. Will not float. Single moulding, with no sharp edges or corners. Alphanumeric grid referenced on top tier for easy identification of samples. End plates can be labelled or written on. Autoclavable.
Test tube racks Nalgene™, PP
White. Widely spaced apertures to accommodate screw cap tubes.
Test tube racks OneRack®, PP
Tough and more highly resistant to acids, bases, solvents and heat. These durable racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces.Molded in alpha-numeric gridNo floating in water bathsFlat labeling areaGood chemical resistanceFurther colours available on request.
Test tube racks Poxygrid, wire
For storage and transport of test tubes.Rigid wire construction with epoxy finishAutoclavable at 121 °C
Test tube racks Switch-Grid™, POM
This split-frame rack holds up to two different tube sizes at the same time. The grids can be switched quickly. The test tube rack can be easily cleaned with common lab detergents, ethanol, or isopropyl alcohol.For test tubes 10 mm to 30 mm diameterWith 5 colour-coded grid insertsThree-tier designNon-slip rubber feetChemical resistantFrame and grids are autoclavable at 121°C
Test tube racks, 18/10 stainless steel wire
Test tube racks made of stainless steel wire, electrolytically polished.
Test tube racks, 18/10 stainless steel, demountable
Test tube rack can be dismantled into individual parts.
Test tube racks, OneRack®, POM
Tough and more highly resistant to acids, bases, solvents and heat. These durable racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces.Molded in alpha-numeric gridNo floating in water bathsFlat labeling areaFiberglass-reinforced polyoxymethylene (POM)Good chemical resistanceAutoclavable
Test tube racks, OneRack®, POM, half size
Tough and more highly resistant to acids, bases, solvents and heat. These durable racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces.Molded in alpha-numeric gridNo floating in water bathsFlat labeling areaFiberglass-reinforced polyoxymethylene (POM)Good chemical resistanceAutoclavable