Funnels, stainless steel V2A
To pour and transfer free-flowing powders, liquids and slightly viscous media.Air channel for unobstructed flowLarger versions with handleAutoclavableSuitable for food
Gaskets, silicone/PTFE, pack of 1
Silicone gasket (VMQ), PTFE coated. For screw caps made from PBT.Autoclavable Thermal resistance: max. 130°C (steam), 200°C (heat)
Gaskets, silicone/PTFE, pack of 10
Silicone gasket (VMQ), PTFE coated. For screw caps made from PBT.Autoclavable Thermal resistance: max. 130°C (steam), 200°C (heat)
General Purpose Test Tube Racks Nalgene™, PC
Organize and store test tubes using general purpose test tube racks. These racks are available with handles for easy carrying. When empty, they can be stacked with any other racks of the same length. Holes are keyed with molded-in numbers and letters for easy identification of tubes. Higher specific gravity than water so it stays submerged in a water bath and won't float. Autoclavable (will reduce strength over time).
GHS Safety Wash Bottles Nalgene™
Prevent chemical accidents in the lab with Nalgene Right-to-Understand LDPE Wash Bottles. Bottles are pre-labeled with chemical identification and safe handling information following the GHS specifications as applicable to secondary laboratory containers. Wash bottles are ready to use when you transfer common laboratory chemicals from manufacturers' containers. Self-venting wash bottles eliminate risk of bottles self-dispensing.Bottles are made from high quality Nalgene materials for low extractables and long life in the labPrinted with 100% Globally Harmonized System (GHS) chemical safety information. No other system markings are used on the bottles, which eliminates confusionColor coded for easy chemical identification at a glanceDispensing nozzles are carefully molded to deliver a straight stream for precision dispensing and safetySelf-venting, so idle bottles won't drip on the bench topDesigned to dispense through the top with a closure and stem molded in one piece for uniform leakproof service
GLS 80® Stirred Reactor
The GLS 80® stirred reactor is suitable for a wide range of laboratory mixing processes. The screwthread connections (2 x GL14, 2 x GL18) provided allow addition or removal of media from the bottle during the mixing process. The whole assembly can be autoclaved and is therefore suitable for use in fermentation and culture. By using components from the GLS 80 connection system, an additional media bottle (Tubing o.d.: 1.6 to 12.0 mm) can be connected or a sterile pressure equalizer attached. Drive for the stirrer is provided by a standard, commercial, magnetic stirrer. The variable length stirrer shaft can be used in DURAN® GLS 80® laboratory glass bottles (1000 and 2000 ml) and provides notably improved mixing in comparison with standard magnetic stirrer bars. The paddle is exchangeable and can be used up to 500 rpm. Typical applications: mixing of liquids, dissolving of solids, simple fermentation.Scope of supply: DURAN® GLS 80® bottle, 1 x GLS 80® screw cap (PP, blue/grey), 1 x GL14 screw cap (PP, blue), 2 x GL14, 2 x GL18 screw cap (PBT red), anchor magnetic stirrer
Gooch crucibles with perforated base, porcelain, tall shape
Tall shape, with glazed perforated base. Lid and filter disc to be ordered separately. Filter holes diam. approx. 0.5 mm.
Gooch crucibles with perforated base, porcelain, wide shape
Wide shape, with glazed perforated base. Lid and filter disc to be ordered separately. Filter holes diam. approx. 0.5 mm.
Graduated jug set, PP, assorted colours
Transparent, in blue, yellow, red and green. With stable handle and easily readable, printed graduations on both sides. Therefore, the volume is equally visible for left- and right-handers. To preserve markings, do not clean at temperatures exceeding 60 ºC.StackableFood-safe product according to regulation (EU) No. 10/2011
Graduated jugs, PP, coloured
Transparent, in different colors. With stable handle and easily readable, printed graduations on both sides. Therefore, the volume is equally visible for left- and right handers. To preserve markings, do not clean at temperatures exceeding 60 ºC.StackableFood-safe product according to regulation (EU) No. 10/2011
Graduated jugs, PP, moulded graduations
Highly transparent. With a raised scale, spout and stable, easy-grip handle. Autoclavable at 121 °C (2 bar) according to DIN EN 285. Food-safe product according to regulation (EU) No. 10/2011.
Graduated jugs, PP, moulded graduations
With moulded graduations, spout and stable, easy-grip handle. Autoclavable at 121 °C (2 bar) according to DIN EN 285. Food-safe product according to regulation (EU) No. 10/2011.
Graduated jugs, PP, moulded, blue graduations
Highly transparent. With moulded, blue graduations, spout and stable, easy-grip handle. Food-safe product according to regulation (EU) No. 10/2011. To preserve markings, do not clean at temperatures exceeding 60 ºC. Conditionally autoclavable at 121 °C (2 bar) according to DIN EN 285. For autoclaving, we recommend the design with raised graduations.
Graduated jugs, SAN, moulded graduations
Crystal clear. With a raised scale and stable, easy-grip handle. Food-safe product according to regulation (EU) No. 10/2011.
Graduated wide-mouth bottles
Wide mouth for easy filling and emptying of liquid or powder samples.Conforms to DIN 13316 and 168With PP closureFood-safeAutoclavable, remove lid before autoclaving
Griffin beakers Nalgene™, PFA, low form
Low form with spout. Good resistance to most chemicals, including sulphuric, nitric, chromic and phosphoric acids.
Griffin beakers Nalgene™, PP, low form
Griffin beakers with practical spout and printed graduation. Stackable. Acc. to ISO 7056.
Griffin beakers PMP, with printed red scale
Crystal clear. With spout and easily readable, printed red scale. To preserve markings, cleaning at no higher than 60 °C is recommended. 10 ml, 150 ml, 400 ml, 600 ml Variants in addition to ISO 7056.
Griffin beakers, PMP, with embossed scale
Crystal clearWith spoutAccording to ISO 7056150 ml, 400 ml, 600 ml Variants in addition to ISO 7056Autoclavable
Griffin beakers, PP
With spout and easily readable, raised blue printed scale (10, 25 and 50 ml only in blue printed scale). To preserve markings, cleaning at no higher than 60 °C is recommended. Food-safe product according to regulation (EU) No. 10/2011.
Griffin beakers, PP
Antistatic, highly transparent, according to DIN 12.311, sterilizable, break-proof, with blue graduation.
Griffin beakers, PP, with embossed graduations
Highly transparentWith spoutWith embossed graduationsAccording to ISO 7056150 ml, 400 ml, 600 ml Variants in addition to ISO 7056AutoclavableFood safe