Ultrapure water system, arium® pro UV, with TOC monitor
ASTM Typ1 water purification system for routine analysis or critical applications where reagent-grade water is required.The UV lamp reduces organic components to a minimum (TOC ≤2 ppb). The current TOC value can be continuously measured by the integrated TOC monitor and shown on the display.Glass display with touch functionVolume- and time-controlled dispensingConductivity measurement for feed and product waterIntegrated monitoring of water consumptionData logging on SD card, printer or PCScope of supply: Ultrapure water system, analytical kit, UV lamp, TOC monitor
Ultrapure water system, arium® pro VF
ASTM Typ1 water purification system for routine analysis or critical applications where reagent-grade water is required.The combination of integrated UV lamp and ultrafilter not only provides a reduction of organic contamination to a minimum (TOC ≤2 ppb), but also simultaneously removes endotoxins, as well as DNases and RNases.Glass display with touch functionVolume- and time-controlled dispensingConductivity measurement for feed and product waterIntegrated monitoring of water consumptionData logging on SD card, printer or PCScope of supply: Ultrapure water system, analytical kit, ultrafilter, UV lamp
Ultrapure water system, arium® pro VF, with TOC monitor
ASTM Typ1 water purification system for routine analysis or critical applications where reagent-grade water is required.The combination of integrated UV lamp and ultrafilter not only provides a reduction of organic contamination to a minimum (TOC ≤2 ppb), but also simultaneously removes endotoxins, as well as DNases and RNases. The current TOC value can be continuously measured by the integrated TOC monitor and shown on the display.Glass display with touch functionVolume- and time-controlled dispensingConductivity measurement for feed and product waterIntegrated monitoring of water consumptionData logging on SD card, printer or PCScope of supply: Ultrapure water system, analytical kit, ultrafilter, UV lamp, TOC monitor
UV replacement lamps for water purification systems Barnstead™
UV replacement lamp suitable for all UV and UF/UV models.
Vent filter for storage reservoirs of the water purification systems Barnstead™
Sterile vent filter (0.2 µm) for storage reservoirs (30 to 100 l).
Viewdepth disk
The viewdepth disk is made of robust plastic for quick and easy determination of the depth of visibility. Easy lowering due to 23 holes and an attached weight. Incl. ring for attaching the cord. Dimensions: 200 x 200 mmMarked cord for the viewdepth disk, 5 m: First meter with marks at every 5 cm, after that markings at all 20 cmPlease order the disk and the cord separately.
Visibility plate
With locking device. Markings every 10 cm to 100 cm.With 3 m 3-part holding rod.
VISOCOLOR® reagent case and photometer
VISOCOLOR® ECO reagent caseFor mobile use with test instructions for visual determination, analytical accessories and the following tests:Ammonium 0.2 - 3mg/L NH4+ / Carbonate Hardness 1 drop = 1.25°e / total hardness 1 drop = 1.25°e / Nitrate 1 - 120mg/L NO3- / Nitrite 0.02 - 0.5mg/L NO2- / pH 4.0 - 9.0 / Phosphate 0.2 - 5mg/L PVISOCOLOR® reagent case for soil analysisThe VISOCOLOR® reagent case for soil analysis is the perfect companion for economical, fast and convenient soil analysis, both in the field or in your laboratory, including the following tests:QUANTOFIX® test strips: Ammonium 10 - 400mg/L NH4+ / Nitrate / Nitrite 10 - 500mg/L NO3-/ 1 - 80mg/L NO2- / VISOCOLOR® ECO test kits: Potassium 2 - 15mg/L K+ / VISOCOLOR® HE test kits: pH 4.0 - 10.0 / Phosphate 1.0 - 20.0mg/L P / pH-Fix test strip: pH 2.0 - 9.0VISOCOLOR® School reagent caseThe VISOCOLOR® SCHOOL reagent case is especially designed for schools and caters to the needs of both students and teachers. All reagents are approved to be used in schools in Germany (GUV - SR 2004 directive) and can be disposed of easily just down the drain without any harm to the environment.Ammonium 0.2 - 3mg/L NH4+, Nitrate 1 - 90mg/L NO3-, Nitrite 0.02 - 0.5mg/L NO2-, Phosphate 0.5 - 15mg/L P, pH pH 4.0 - 9.0, Total hardness 1 drop = 17.8mg/L CaCO3VISOCOLOR® Reagent case for environmental analysis with photometer PF-12Plus:User guidance in 12 languages (DE, EN, FR, ES, IT, NL, HU, PL, PT, CZ, ID, SL, TR, MY)For determination of VISOCOLOR® ECO Ammonium 15, VISOCOLOR® HE Carbonate hardness C 20, VISOCOLOR® ECO Iron 2, VISOCOLOR® HE total-Hardness H 20 F, VISOCOLOR® ECO Nitrate, VISOCOLOR® ECO Nitrite, VISOCOLOR® ECO pH 4.0-9.0 and VISOCOLOR® ECO PhosphateSpecifications PF-12Plus: Light source: Detector: Xenon lamp Silicon photo-elementDisplay:Backlit graphic display, 128 x 64 pixels All important data at a glance: Result in respective unit, date, time, sample number, sample location and dilutionOperation:Display user guidance, plastic foil keyboard Test selection via parameter lists.Accuracy: Long-term stability: Interface:±1% 0.002A/h USB 2.0Power supply:Via USB power supply, standard or rechargeable batteries or AkkupackDimensions: Weight:215 x 100 x 65mm 0.7kgList price for one package, volume discount at 10 packages.
VISOCOLOR® reagent case and photometer
VISOCOLOR® reagent case for soil analysis with PF-3 SoilThe newest version of the VISOCOLOR® reagent case for soil analysis includes, beside reagents and accessories, also the compact photometer PF-3 Soil.The reagent case contains the following test kits: Quantofix® test strips: Nitrate/Nitrite: 10-50mg/L NO3- / 1-8mg/L NO2-VISOCOLOR® ECO test kits: Ammonium 3: 0.1-2.5mg/L NH4+ / Potassium: 2-15mg/L K+ / Nitrate: 4-60mg/L NO3- / Phosphate: 0.6-15.0mg/L PO43- pH-Fix test strips: pH 2.0-9.0VISOCOLOR® FISH reagent caseThe VISOCOLOR® FISH reagent case is developed for the requirements in analysis of fisheries waters. The flexible and tough reagent case is especially suited for mobile analysis directly at the point of interest. Beside the needed accessories, the VISOCOLOR® FISH reagent is equipped with 6 tests for colorimetric and titrimetric determination of the following classic parameters: Ammonium: 0.2-3mg/L NH4+, Nitrate: 1-90mg/L NO3-, Nitrite: 0.02-0.5mg/L NO2-, Phosphate: 0.5-15mg/L PO43-, pH: 4.0-9.0, Total Hardness: 1 drop = 1°d
Volumetric flasks, PFA, class A, with screw cap
Highly transparent. Class A tolerances according to DIN EN ISO 1042.The PFA screw cap guards against contamination.Outstanding chemical resistance, can be used with strong oxidants, highly concentrated acids and alkalis, hydrocarbons, and ketones.With laser-engraved lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit.To preserve the ring mark, do not clean at temperatures exceeding 60ºC.The advantages of PFALong-term maintenance of low-concentration reference materials in PFA containersNo memory effectsPractically no carryover, no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfacesHigh thermal stability, from -200°C to +260°CChemical inertness against nearly all chemicalsGood transparency and dimensional stability, suitable for volumetric instrumentsEasy to cleanUse of high purity raw materials
Wall mounting bracket for water purification systems Barnstead™ MicroPure™ and Smart2Pure™
Bracket for space-saving storage of water treatment systems on a wall. Suitable for all model variants and permeate flow rates.
Wall mounting brackets for storage reservoirs of water purification systems Barnstead™
Bracket for space-saving storage of storage reservoirs on a wall.
Wash bottles Nalgene™ Type 2403, FEP, with screw cap, ETFE
Screw cap, jet and feed tube are one-piece moulded from ETFE. Ideal for contamination-free work and suitable for trace element analysis.
Wash bottles, PFA
These wash bottles feature a wide-mouth opening for convenience in filling and pouring of all types of liquids. Non-stick and easy to clean, fluoropolymer construction provides superior flex life and mechanical strength. As PFA contains the lowest concentration of trace metal ions of all fluoropolymers, these bottles are ideal for ultra-pure applications and environmental work.Wide-mouth for easy fillingChemically inert and leak-proofFlexible nozzle with 360° swivel; small orifice allows accurate content dispensingTransparent and break resistantMolded-in graduation marks
Waste Water Set-Up MD 610
Flexible wastewater measuring station with mobile photometer MD 610 and thermoreactor RD 125, complete with reagents for COD measurement and the appropriate accessories. With the MD 610, the measurement results of the wastewater can be called up and evaluated on a smartphone or tablet. The RD 125 thermoreactor is equipped with 24 holes for 16 mm cuvettes.Data transfer via Bluetooth® and AquaLX® appInterference filter for increased reproducibility of the resultsMemory for 500 measurement results120 pre-programmed methodsScope of supply: Photometer MD 610, standard accessories, Thermoreactor RD 125, Cuvette tests: COD (0 ... 150 mg/l, 0 ... 1500 mg/l, ammonium VARIO HR (1 ... 50 mg/l N), nitrate VARIO (1 ... 30 mg/l N), nitrite LR VARIO Powder Pack (0.01 ... 0.3 mg/l N), nitrogen VARIO Total HR (5 ... 150 mg/l N ), phosphate VARIO Total HR (0.02 ... 1 mg/l P / 0.06 ... 3.5 mg/l PO4), cuvette stand, membrane filtration set, operating instructions, warranty declaration
Watch Glasses, PTFE
This ultra-shallow, concave dish is ideal for holding, weighing, crystallizing, evaporating and drying small samples of liquids, powders and solids. It can also be used as a convex cover for beakers and Erlenmeyer flasks to limit airborne contaminants, while still allowing gas exchange. All sizes are molded to the same contour for easy stacking. Shatter-proof PTFE material is chemical resistant and easy to clean.Inert, chemically resistantSmooth and unbreakableUse as beaker covers
Water hardness test strips, AQUADUR®
For determining water hardness.Colour change from green to red.*single sealed**3 test each sealedTest strips are also available as individually sealed test strips or as test cards.
Water still WS-200A-8
Made from borosilicate glass. For fully automated, unattended operation, equipped with over-temperature thermostat, flow meter and reservoir level control. The water still works with every water supply. With silica sheathed heaters for the production of 8 l pyrogen-free distillate of high purity from any raw water supply. Rapid descaling with no need to dismantle the device thanks to the integrated funnel for addition of acid and the PTFE stopcock for draining the cleaning solution. The acrylic safety screen and the cabinet lid are removable for unrivalled access to the glassware components. The water connections are equipped with screwthreads for easy and safe fitting and removing of hoses without risk of damage. All components are enclosed in a cabinet which can either stand on the laboratory bench or can be wall mounted.Automatic switch-off on full reservoirCan be operated from 20 kPa water pressureEasy to cleanWall mounting includedSpecificationspH value:5.0…6.5Conductivity:1.0…2.0 µS/cmResistance:0.5…1.0 mΩ/cmWater consumption: Output:approx. 120 l/h 8 l/hPower consumption: Dimensions (W x T x H):6000 W 550 x 240 x 410 mmPower supply:220…240 V, 50-60 Hz
Water stills Puridest
The water stills Puridest produce high-purity, low-gas, germ-free and pyrogen-free distillate, e.g. for diluting reagents and samples. After a direct connection to the raw water and the power supply, ultrapure water can be drawn off directly. The distillation systems with one or two distillation stages achieve excellent conductivity values. The glass water stills deliver water that is almost free of metal ions.With »GFL Technology« for the highest quality, reliability and durabilityDistillates with conductance values up to 1.6 µS/cm, comply with the DAB regulations and the provisions of international pharmacopoeias (conductance values are "approximate" values, depending on the raw water)R series has a built-in storage tankMaintenance needs are limited to simply cleaning contaminants from the stillWith LED indicators for operating status and cleaning requirements (PD 2 and PD 4 only with LED indicators for operating status)
Water stills WS-100-4 / WS-200-4-220
For economic production of high purity distilled water. The devices are eqipped with 2 independent safety thermostats that prevent from overheating in the event of failure of the water supply. With built in acid addition funnel and stopcock for easy descaling without dismantling. Screwthreads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage. The condenser design ensures that the droplets of distilled water stay in contact with the cooling coil as long as possible for providing cold distilled water.Glass constructionAutomatic switch-off prevents overflowPre-drilled stand for easy wall mountingWith metal/silica sheated metal heatersSpecificationsWS-100-4 // WS-200-4-220pH range:5.0…6.5Conductivity:3.0…4.0 µS/cm // 1.0…2.0 µS/cmResistance:0.25…0.3 mΩ/cm // 0.5…1.0 mΩ/cmWater consumption: Output:approx. 60 l/h 4 l/hPower consumption: Dimensions MERIT (W x T x H): Dimensions DISTINCTION (W x T x H):3000 W 500 x 150 x 450 mm 540 x 160 x 410 mmPower supply:220-240 V, 50-60 Hz
Wide-mouth bottles with cap, graduated, PFA
These PFA graduated bottles have a convenient wide-mouth opening for easy filling and pouring. These unbreakable, chemically inert bottles can be used for storage of virtually all corrosive chemicals. PFA material is heat resistant, non-stick and easy-to-clean. Each includes a PFA cap with an inert fluoropolymer cap liner to ensure leak-proof sealing. Ideal for environmental sampling, or for storage in pharmaceutical and intermediate-stage semiconductor processing applications.Wide-mouth for easy fillingUltra pure and chemically inertNon-stick and easy-to-clean
Wide-mouth bottles with screw thread, PFA
Transparent, with tightly sealing screw closure (saw-tooth thread S and built-in sealing lip). Excellent resistance to temperature (from -200 to +250 °C). Ideal for long-term storage of high-purity oxidants, acids, alkalis, as well as hydrocarbons, trace analysis solvents and standards. Autoclavable at 121°C (2 bar) according to DIN EN 285.
Wide-mouth bottles, PFA
For long-term storage of solvents and standards (trace analysis).PFA screw cap with integrated seal lip and buttress threadTemperature resistant from -200 ºC to +260 ºCAutoclavable
Wireless measuring heads OxiTop® IDS
OxiTop®-IDS wireless measuring head with Bluetooth® LE technology for operation with Multi 3620 IDS or Multi 3630 IDS. For routine BOD readings also operable without IDS multiparameter instrument. OxiTop®-IDS/B with enhanced pressure range up to 1500 hPa and H2S resistant pressure sensor for biogas measurement.Memory for 360 measuring points3 operating buttonsBacklit graphic LCDControl LEDVolume pre-selectionFor routine BOD readings measurement duration selectable (1 to 7 days)Display of measuring curveDisplay of current readingsIntermediate values available
Wireless module IDS WLM-M for WTW® measuring instruments
Wireless module for connecting to MultiLine® 3310/3510/36x0 IDS, inoLab® Multi IDS and MonoLine. Connects up to three sensors at the same time (depends on meter capabilities). Also for operation of OxiTop®-IDS.
Workstations for SMA ARB
Workstation model SMA-ARBThe behrotest® workstation model SMA-ARB is a basic system for simultaneous aqua regia digestion of either 6 or 12 samples for heavy metals analysis.System components:Precision 6 or 12 sample SMA heating block for round-bottom sample vessels of Ø 41.8 mm, temperature range 20 to 300 °C.External ET 2 controller, operating range 20 to 399°C. Time settings from 10 to 120 min. and continuous operation.6 or 12 SR 2 250 ml round-bottom sample vessels with standard taper mouth and PVDF collar.6 or 12 RFK 1 Allihn reflux condensers.6 or 12 AS 1 absorption vessels.SG/B stainless steel vessel holding frame for 6 or 12 sample vessels.Support scaffold with cooling water distributor and storage holder for 6 or 12 condensers.Workstation model SMA-ARMThe behrotest® SMA-ARM workstations are provided with a programmable microprocessor-controlled time/temp. controller as well as a fume manifold for drawing off the acid vapors. This results in greater convenience and functionality in routine laboratory operations.
X-am® 5600 gas detector, waste water set
Ergonomically designed and equipped with innovative infrared sensor technology: The Dräger X-am® 5600 is a multi-gas detector for measuring up to six gases.Ideal for personal protectionRobustWaterproofDevice measures explosive, flammable, toxic gases and vapours as well as oxygenSet consisting of: Dräger X-am® 5600 device with the following sensor equipment:- Dual IR Ex/ CO2- XXS sensor O2- XXS sensor CO/H2SBattery and charging technology set incl. CSE case with pump, float probe and 5 m Viton hose