Compact Photometer PF-12Plus
The compact photometer PF-12Plusis a customized device for mobile water analysis, which is used to evaluate the proven VISOCOLOR® ECO tests and NANOCOLOR® tube tests by MACHEREY-NAGEL. This filter photometer with microprocessor control, self-test and auto-calibration is suitable for mobile analytics. It is equipped with more than 100 preprogrammed methods and additional functions. An 860 nm LED allows the nephelometric turbidity measurement in the range of 1 to 1000 NTU. The icon-based menu navigation and the clear task bar make the PF-12Plusan easy-to-use photometer for all applications in water and waste water analysis. Numerous other variants of the VISOCOLOR® and NANOCOLOR® reagent cases are available in combination with the PF-12Plus.With over 100 preprogrammed tests and special methods, extinction, transmission, factor, standard, nephelometric turbidity measurement (NTU-Check), 50 freely programmable methods7 interference filter with a receptacle for an additional filter, 860 nm LED for NTU measurementInsensitive to external light for fast measurement without cuvette slot coverXenon high-pressure lampAutomatic zero balanceFully automatic turbidity control at 90° angle (NTU-Check)Free updatesScope of delivery: Compact photometer PF-12Plusincl. Software DVD, manual, 4 batteries, 4 empty cuvettes, funnel, cup, syringe, USB cable, calibration cuvette, certificate and cleaning cloth in a sturdy caseSpecificationsOptics:Automatic filter wheel with 7 interference filtersWavelengths:345 nm / 436 nm / 470 nm / 540 nm / 585 nm / 620 nm / 690 nm / 860 nmWavelength accuracy:± 2 nm, bandwidth at half transmission 10 ... 12 nmPhotometric range / accuracy:± 3 A / ± 1 %Stability:0.002 A/hData memory:1000 results, GLP conformCuvette slot:Round cuvettes 16 mm ODDisplay:Backlit graphic display, 128 x 64 pixelsInterface:USB 2.0Environmental conditions:10 ... 40 °C, up to 80 % relative humidity (non-condensing)Dimensions (W x D x H):215 x 100 x 65 mmWeight:700 gPower supply:USB interface, batteries, rechargeable batteries or accu-packIP code:IP 68
Compact Photometer PF-3 Pool
The LED Photometer PF-3 with micro processor control for evaluation of pre-programmed NANOCOLOR® and VISOCOLOR® ECO tests is ideally suited for mobile operation directly on site in the swimming pool.Add new tests and parameters anytimeSelf-test and auto calibrationInsensitive to external light for fast measurement without cuvette slot coverTest selection from parameter listsWaterproof and sturdyFree software for data exportScope of delivery: Photometer PF-3 in VISOCOLOR® reagent case with VISOCOLOR® ECO Chlorine 2 free + total (liquid), pH 6.0 - 8.2, cyanuric acid, alkalinity TA incl. calibration cuvette, 4 empty cuvettes, sample cup, 5 ml syringe, 3 batteries, manual, booklet "VISOCOLOR® ECO Test Instructions for Compact Photometer PF-3" and certificate in a sturdy case.SpecificationsOptics:LED with 3 interference filtersWavelengths:450 nm / 530 nm / 590 nmWavelength accuracy:± 2 nm, bandwidth at half transmission 10 ... 12 nmData memory:50 resultsCuvette slot:Round cuvettes 16 mm ODDisplay:Backlit graphic display, 128 x 64 pixelsInterface:Mini-USBDimensions (W x D x H):170 x 95 x 68 mmWeight:500 gPower supply:USB interface, batteries, rechargeable batteries or accu-packIP code:IP 68
Compact system for determination of water content
Compact system for determination of water content by azeotropic distillation. Suitable for non-homogeneous and irregularly shaped food such as dried fruit and vegetables, Sauerkraut etc. With base stand, heating mantle, mounting frame and glassware.
Compact system KCM 1-N with magnetic stirrer for cyanide distillation
Excellent recovery rates even with difficult sample matrices in water and soil analysis: Simultaneous heating and stirring with the compact distillation apparatuses with magnetic stirrer for cyanide determination. With integral magnetic stirrer, suspended absorption vessel, and dropping funnel for reagent additions, the installation corresponds with the draft document for the new DIN/EN/ISO methods. The special behr absorption container with exact behr bore guarantees the full absorption of cyanide and full rinsing into the measurement flask.Exact flowmeter ensures the air pressure defined in the normWith base stand, heating mantle, magnetic stirrer, flow meter, clamps, tubing, and glasswareFor the determination of total cyanideIncluding high-performance membrane vacuum pump
Compact systems for sulphur dioxide determination, KSO/SO
For determination of sulphur dioxide (total SO2), 2 absorption units per sample. With base unit, heating mantle, mounting frame and glassware, including 500ml reaction flasks. Systems with adsorption units or other flask sizes on request.
Complete Compact Extraction System
Compact Extraction System in accordance with TwisselmannComplete compact extraction system with stand, heating module, mount, hoses and glassware (round-bottom reaction flask, extractor, Dimroth condenser for extraction).
Complete compact extraction systems, with heating
Complete compact extraction systems with stand, heating module, mount, hoses and glassware (round-bottom reaction flask, extractor, Dimroth condenser for extraction). Infinitely variable heating regulation.practical stand for holding the condensers securely between extractionsextractor sizes from 30 ml to 5000 mlthe use of extractors with a stopcock eliminates the need for any additional distillation after extractionCondensers with screwed-on tubing nipples
Complete Cyanide Distillation Unit, 6 Sample Places
Professional sample preparation for cyanide determination in aqueous and soil samples with six sample positions: Simultaneous heating and stirring guarantee a high recovery rate and exact analysis results.Efficient unit with six sample places for the distillation of total cyanide. Precision heating block with highly accurate temperature control. The integrated magnetic stirrer makes the CN 6 appropriate for cyanide determination in water according to international standards. Accessories available for the distillation of total cyanide in soils according to ISO 11262:2011 - Soil quality. Determination of total cyanide.
Conductivity cell probes for purified and ultra-pure water, for PrimeLab 2.0
For conductivity measurements of purified and ultra-pure water.Glass electrode, 7 x 18 mm platinumWith integrated temperature sensorFor connecting to the ProbeBOX 1.0
Conductivity cell probes for purified and ultra-pure water, starter kit, for PrimeLab 2.0
For conductivity measurements of purified and ultra-pure water.With integrated temperature sensorElectrode 7 x 18 mm platinumAutomatic recognition of the connected electrodesSynchronisation via LabCOM®, LabCOM® cloud (optional and free of charge)ProbeBOX 1.0 to connect the electrodes to the PrimeLab 2.0Scope of supply:Conductivity cell probe, 100 ml calibration solution (EC 84 µS/cm), USB type-C cable, ProbeBOX 1.0, carrying case, user manual
Conductivity cell probes, for PrimeLab 2.0
For conductivity measurements in the laboratory.With integrated temperature sensorFor connecting to the ProbeBOX 1.0
Conductivity cell probes, starter kit, for PrimeLab 2.0
For conductivity measurements in the laboratory.With integrated temperature sensorAutomatic recognition of the connected electrodesSynchronisation via LabCOM®, LabCOM® cloud (optional and free of charge)ProbeBOX 1.0 to connect the electrodes to the PrimeLab 2.0Scope of supply:Conductivity cell probe, 2 x 20 ml calibration solution (EC 1413 µS/cm / 12.88 mS/cm), USB type-C cable, ProbeBOX 1.0, carrying case, user manual
Controlled Temperature Cabinet TS 1010-i for special applications, 4 internal sockets
Compact temperature cabinets with internal sockets for the use of OxiTop® IS 12 stirring platforms.Incubation conforming to standardsSuited for BOD, OECD 301F, soil respiration, anaerobic degradationTemperature adjustable in steps of 1 K between 10 and 40 °CEco-friendly refrigerant R600aNote: The necessary temperature constancy will only achieved in combination with the samples.Compact temperature cabinets with internal sockets for the use of OxiTop® IS 12 stirring platforms.Incubation conforming to standardsSuited for BOD, OECD 301F, soil respiration, anaerobic degradationTemperature adjustable in steps of 1 K between 10 and 40 °CEco-friendly refrigerant R600aNote: The necessary temperature constancy will only achieved in combination with the samples.
Controlled Temperature Cabinet TS 608-G/2-i for standard applications, 2 internal sockets, glass door
Compact temperature cabinets with internal sockets for the use of OxiTop® IS 12 stirring platforms.Incubation conforming to standardsSuited for BOD, OECD 301F, soil respiration, anaerobic degradationTemperature adjustable in steps of 1 K between 10 and 40 °CEco-friendly refrigerant R600aNote: The necessary temperature constancy will only achieved in combination with the samples.Model with insulation glass door allows visual control of the OxiTop® heads without opening the door.
Controlled Temperature Cabinet TS 608/2-i for standard applications, 2 internal sockets
Compact temperature cabinets with internal sockets for the use of OxiTop® IS 12 stirring platforms.Incubation conforming to standardsSuited for BOD, OECD 301F, soil respiration, anaerobic degradationTemperature adjustable in steps of 1 K between 10 and 40 °CEco-friendly refrigerant R600aNote: The necessary temperature constancy will only achieved in combination with the samples.Compact temperature cabinets with internal sockets for the use of OxiTop® IS 12 stirring platforms.Incubation conforming to standardsSuited for BOD, OECD 301F, soil respiration, anaerobic degradationTemperature adjustable in steps of 1 K between 10 and 40 °CEco-friendly refrigerant R600aNote: The necessary temperature constancy will only achieved in combination with the samples.
Controlled Temperature Cabinet TS 700-G/4-i for standard applications, 4 internal sockets, glass door
Compact temperature cabinets with internal sockets for the use of OxiTop® IS 12 stirring platforms.Incubation conforming to standardsSuited for BOD, OECD 301F, soil respiration, anaerobic degradationTemperature adjustable in steps of 1 K between 10 and 40 °CEco-friendly refrigerant R600aNote: The necessary temperature constancy will only achieved in combination with the samples.Model with insulation glass door allows visual control of the OxiTop® heads without opening the door.
Controlled Temperature Cabinet TS 700/4-i for standard applications, 4 internal sockets
Compact temperature cabinets with internal sockets for the use of OxiTop® IS 12 stirring platforms.Incubation conforming to standardsSuited for BOD, OECD 301F, soil respiration, anaerobic degradationTemperature adjustable in steps of 1 K between 10 and 40 °CEco-friendly refrigerant R600aNote: The necessary temperature constancy will only achieved in combination with the samples.Compact temperature cabinets with internal sockets for the use of OxiTop® IS 12 stirring platforms.Incubation conforming to standardsSuited for BOD, OECD 301F, soil respiration, anaerobic degradationTemperature adjustable in steps of 1 K between 10 and 40 °CEco-friendly refrigerant R600aNote: The necessary temperature constancy will only achieved in combination with the samples.
Cooking oil tester FOM 330
Checks the quality and temperature of cooking oils, with indication by a clearly visible signal lamp. Can be used in hot oil up to 200 °C.Large display with big numbersFOM 330-4 with 4 controls for frequent adjustmentsFOM 330-1 with 1 control for infrequent adjustmentsSimplified menu structureIncl. calibration protocolMeasuring range TPM: 0 to 40 %TPMAccuracy TPM: ±2 %TPMResolution TPM: 0.5 %TPMTemperature range: 50 to 200 °CAccuracy temperature: ±1 °CResolution temperature: 0.1 °C
Cooking oil tester testo 270 BT
The cooking oil tester enables simple, fast, and reliable monitoring of cooking oil quality. A capacitive oil sensor measures the % content of ‘Total Polar Materials’ (TPM) in the oil. TPM limit values can be set individually and protected against inadvertent changes by a PIN. The alarm via the colour-illuminated traffic light display (green/orange/red) makes it easier to evaluate the quality of the cooking oil. With Hold and Auto-Hold function. Measurements can be taken directly in the hot oil, as the fibreglass housing is extremely impact-resistant and the ergonomic design protects against the heat of the cooking oil. Seamless, digital documentation is possible via the testo Smart App connection. All measurement values can be transferred to the testo Smart App via Bluetooth®. For regulatory requirements and internal quality assurance, data can be exported or professional reports can be created in PDF format (incl. signature & comment function). The cooking oil tester can be calibrated directly at the measuring point using the reference oil. The measuring device can be easily washed under running water (protection class IP65).Measuring range TPM: 0 to 40 %TPMAccuracy TPM: ±2 %TPM (40 to 190 °C)Resolution TPM: 0.1 %TPMTemperature range: 40 to 200 °CAccuracy temperature: ±1.5 °CResolution temperature: 0.1 °CScope of supply: Cooking oil tester, plastic case, reference oil, calibration protocol, training card, instruction manual, batteries
Cooling Bath Fluid for Cryoscopes
The cooling bath liquid is suitable for devices for freezing point determination in milk.
Cream Butyrometer Koehler Gerber Standard
Volumetric method for 5 ml cream, with frosted label on bulb, ring neck, without stopper.
Cream Butyrometer Roeder with accessories
Gravimetric method for 5 g cream, with 2 openings, frosted label on bulb, complete with rubber stoppers and glass beaker without hole.
Cream butyrometer, borosilicate glass
Cream butyrometer measuring method, for ice cream.
Cream butyrometer, borosilicate glass
Cream butyrometer according to Roeder‘s weighing method.
Cream butyrometer, borosilicate glass
Cream butyrometer according to Koehler‘s measuring method.
Cream butyrometer, borosilicate glass
Cream butyrometer according to Schulz-Kley‘s weighing method.
Cryoscope C1
For easy and quick determination of the freezing point of milk acc. to ISO 5764/IDF 108.Extremely quiet operationOperation via user-friendly touch screenEasy calibration thanks to comprehensible menu navigationCooling system with heat pipe (without water cooling)Dust filter to protect the cooling systemData output to external printer and/or PC selectableCryoscope C1:Manual for single samplesCryoscope C1A:Automat for 12 samplesScope of supply: Cryoscope, standard solution 408 (250 ml), standard solution 512 (250 ml), standard solution 600 (250 ml), Heat transfer fluid (250 ml), 10 test tubes 2.0 ml with ring marks, operating manual, country-specific power cableMeasuring range:0 ... -1000 m°C/m°HResolution:0.1 m°C/m°HRepeatability:±2 m°C/m°HTest time:90 s (time mode 30 s)Sample volume:2.0 ml or 2.5 mlAmbient temperature:15 ... 35 °CDimensions (W x D x H):280 × 420 × 320 mmWeight:11 kgPower supply:110 ... 240 V, 50/60 Hz
Cryoscope Calibration Solutions
Standard solution. Bottle of 250 ml. Other solutions on request.
Cryoscope standards
Compatible for use on all Cryoscopes compliant to International Reference Standard ISO5764/IDF108 for the determination of Freezing Point in milk. High accuracy, 1 year shelf-life (from Date of Manufacturing). Supplied in 250 and 100ml HDPE bottle and a convenient cap with collapsible filling nozzle
Cryoscope Standards
Calibration standard to determine the freezing point in the milk. Bottles à 250 ml.
Cuvette tests, 16 mm
Completely equipped with all reagents. TNT (Test 'N Tube) tests can only be evaluated with the DR900.
Cuvette Tests, LCK
Ready-to-use cuvette tests with pre-dosed reagents for photometric evaluation.Exact concentrations of the ISO formulationHigh measuring accuracy
