Carriers for swing-out rotors A-4-81 and S-4x500
For use with IsoRack and cell culture flask adapters as well as MTP and DWP.
Cell culture package 1000 ml-bucket for floor centrifuges FC5917RF/FC5917RF Short
Scope of supply: Swing-out rotor 4 x 1000 ml, 4 x bucket 1000 ml, 4 x lid for bucket, 4 x rack (5 x 50 ml, Ø 29 mm, conical)
Cell culture package 500 ml-bucket for floor centrifuges FC5917RF/FC5917RF Short
Scope of supply: Swing-out rotor 4 x 1000 ml, 4 x bucket 500 ml or 7 x MTP, 4 x rack (10 x 50 ml, Ø 29 mm, conical), 4 x rack (24 x 15 ml, Ø 17 mm, conical)
Centrifugal filter JetSpin® with 15 ml centrifuge tube
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 5 mlCentrifuge tube: 15 mlWhite capPack of 4 x 24
Centrifugal filter JetSpin® with 2 ml centrifuge tube
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 0.5 mlCentrifuge tube: 2 mlPack of 12 x 25
Centrifugal filter JetSpin® with 50 ml centrifuge tube, 24 per box
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 15 mlCentrifuge tube: 50 mlWhite capPack of 4 x 24
Centrifugal filter JetSpin® with 50 ml centrifuge tube, 8 per box
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 15 mlCentrifuge tube: 50 mlWhite capPack of 12 x 8
Microcentrifuge 5425 (IVD), with foil keypad, with aerosoltight rotor FA-24x2 and QuickLock® Pro lid
The 5425 and 5425 R microcentrifuges are whisper-quiet and offer outstanding features for a wide range of molecular and cell biology applications in Eppendorf and PCR tubes from 0.2 to 5 ml.The refrigerated centrifuge 5425 R with its advanced cooling system offers precise temperature control for processing temperature-sensitive samples.Aerosol-tight Eppendorf QuickLock® lid for easy and safe handlingOutstanding software functions (e.g. adjustable acceleration and deceleration ramps, short function without constant key pressure)Extended rotor programme (e.g. 5.0 ml rotor, swing-out rotor for PCR strips)OptiBowl® design for quiet operation, even without rotor lidSoft-touch one-finger lid lock for ergonomic operationMaximum rotor capacity: 10 × 5.0 mL tubesMax. Speed: 21,300 × g (15,060 rpm)The 5425 and 5425 R microcentrifuges are whisper-quiet and offer outstanding features for a wide range of molecular and cell biology applications in Eppendorf and PCR tubes from 0.2 to 5 ml.The refrigerated centrifuge 5425 R with its advanced cooling system offers precise temperature control for processing temperature-sensitive samples.Aerosol-tight Eppendorf QuickLock® lid for easy and safe handlingOutstanding software functions (e.g. adjustable acceleration and deceleration ramps, short function without constant key pressure)Extended rotor programme (e.g. 5.0 ml rotor, swing-out rotor for PCR strips)OptiBowl® design for quiet operation, even without rotor lidSoft-touch one-finger lid lock for ergonomic operationMaximum rotor capacity: 10 × 5.0 mL tubesMax. Speed: 21,300 × g (15,060 rpm)
Microcentrifuge 5425/5425 R (IVD), with control knobs, with aerosoltight rotor FA-24x2 and QuickLock® Pro lid
The 5425 and 5425 R microcentrifuges are whisper-quiet and offer outstanding features for a wide range of molecular and cell biology applications in Eppendorf and PCR tubes from 0.2 to 5 ml.The refrigerated centrifuge 5425 R with its advanced cooling system offers precise temperature control for processing temperature-sensitive samples.Aerosol-tight Eppendorf QuickLock® lid for easy and safe handlingOutstanding software functions (e.g. adjustable acceleration and deceleration ramps, short function without constant key pressure)Extended rotor programme (e.g. 5.0 ml rotor, swing-out rotor for PCR strips)OptiBowl® design for quiet operation, even without rotor lidSoft-touch one-finger lid lock for ergonomic operationMaximum rotor capacity: 10 × 5.0 mL tubesMax. Speed: 21,300 × g (15,060 rpm)The 5425 and 5425 R microcentrifuges are whisper-quiet and offer outstanding features for a wide range of molecular and cell biology applications in Eppendorf and PCR tubes from 0.2 to 5 ml.The refrigerated centrifuge 5425 R with its advanced cooling system offers precise temperature control for processing temperature-sensitive samples.Aerosol-tight Eppendorf QuickLock® lid for easy and safe handlingOutstanding software functions (e.g. adjustable acceleration and deceleration ramps, short function without constant key pressure)Extended rotor programme (e.g. 5.0 ml rotor, swing-out rotor for PCR strips)OptiBowl® design for quiet operation, even without rotor lidSoft-touch one-finger lid lock for ergonomic operationMaximum rotor capacity: 10 × 5.0 mL tubesMax. Speed: 21,300 × g (15,060 rpm)
Microcentrifuge 5425 (General Lab Product), with foil keypad, with aerosoltight rotor FA-24x2 and QuickLock® Pro lid
The 5425 and 5425 R microcentrifuges are whisper-quiet and offer outstanding features for a wide range of molecular and cell biology applications in Eppendorf and PCR tubes from 0.2 to 5 ml.The refrigerated centrifuge 5425 R with its advanced cooling system offers precise temperature control for processing temperature-sensitive samples.Aerosol-tight Eppendorf QuickLock® lid for easy and safe handlingOutstanding software functions (e.g. adjustable acceleration and deceleration ramps, short function without constant key pressure)Extended rotor programme (e.g. 5.0 ml rotor, swing-out rotor for PCR strips)OptiBowl® design for quiet operation, even without rotor lidSoft-touch one-finger lid lock for ergonomic operationMaximum rotor capacity: 10 × 5.0 mL tubesMax. Speed: 21,300 × g (15,060 rpm)These centrifuges are General Lab Products for research purposes.
Microcentrifuge 5425/5425 R (General Lab Product), with control knobs, with aerosoltight rotor FA-24x2 and QuickLock® Pro lid
The 5425 and 5425 R microcentrifuges are whisper-quiet and offer outstanding features for a wide range of molecular and cell biology applications in Eppendorf and PCR tubes from 0.2 to 5 ml.The refrigerated centrifuge 5425 R with its advanced cooling system offers precise temperature control for processing temperature-sensitive samples.Aerosol-tight Eppendorf QuickLock® lid for easy and safe handlingOutstanding software functions (e.g. adjustable acceleration and deceleration ramps, short function without constant key pressure)Extended rotor programme (e.g. 5.0 ml rotor, swing-out rotor for PCR strips)OptiBowl® design for quiet operation, even without rotor lidSoft-touch one-finger lid lock for ergonomic operationMaximum rotor capacity: 10 × 5.0 mL tubesMax. Speed: 21,300 × g (15,060 rpm)These centrifuges are General Lab Products for research purposes.
Centrifuge bottle Nalgene™, FEP
Transparent centrifuge bottle made of FEP with ETFE screw cap. Ideal for lipid and phenole extraction, digestions and precipitations at low speeds. Autoclavable.
Centrifuge bottles CellSafeTM
ConicalISO 13485 and ISO 9001 certifiedProduced in class 100000 clean roomsMade with USP Class VI standards medical-grade raw materialsGMP compliantMarked with batch numberTriple-bagged packagingSterilised by irradiation, SAL 10-6DNase/RNase-free, pyrogen-free, non-cytotoxic
Centrifuge bottles Fiberlite™, PC
Bottles with a Fiberlite™ cap closure. Ideal for isolating cells, bacteria, and yeasts. The smooth inner walls of the bottles reduce shear forces during the separation of mammalian cell cultures. Non-cytotoxic. Autoclavable.
Centrifuge bottles Fiberlite™, PPCO
Bottles with a Fiberlite™ cap closure. Ideal for isolating cells, bacteria, and yeasts. The smooth inner walls of the bottles reduce shear forces during the separation of mammalian cell cultures. Non-cytotoxic. Autoclavable.
Centrifuge bottles Nalgene ™, PC, with conical bottom
For cell culture applications and protein biochemistry. PP sealing cap with silicone seal for added leak protection. The adapter is required for use.Crystal clearGraduated in 25 ml stepsAutoclavable
Centrifuge Bottles Nalgene™ with Sealing Cap , SuperSpeed
Designed to boost productivity and pellet recovery in super speed, large volume gross separation applications. Process one full Litre in each window-clear bottle at speeds up to 15810 x g. Graduated, wide-mouth bottle simplifies decanting, re-suspensions and pellet removal. Smooth inner walls are less likely to shear delicate cells. Ideal for bacterial, yeast and tissue isolations. Improve viral harvesting in vaccine production. Reduce shearing in mammalian culture separations. PC offers excellent clarity. Ergonomic design facilitates loading, recovery and storage of samples. Recommended operating temperature range is from 4 °C to 22 °C; storage to - 70 °C. Before autoclaving, just set closure on top of bottles without engaging the threads. For proper performance these bottles must be filled to at least 80 % of the total capacity.
Centrifuge bottles Nalgene™, BioBottle
Centrifuge bottle with 2L capacity.Separating large volumes up to 12LCentrifugation up to 7333xg, at temperatures from 4°C to 22°CBottle meets the requirements of USP VINon-cytotoxic, not hemolyticPPCO bottle, PP seal screw cap with silicone sealGraduated, total volume of 2380mlExcellent chemical resistanceBefore autoclaving, unscrew the cap and place it on the bottle neckBottles must always be at least 80% filledThe closure design features a two-piece plug and sealing cap to support aseptic handling techniques. Use of the two-piece closure system protects the bottle contents from contamination when the support bridge is applied and removed from the bottle. The plug includes a retaining ring to ensure and maintain the placement of the gasket during use. Dimensions (W x D x H): 111.3 x 175.3 x 209.3 mm.
Centrifuge bottles Nalgene™, PC
PC with PP screw cap. Crystal clear. Good mechanical strength. Autoclavable. Leak-proof even at low speeds. In order to ensure that the system is leak-proof even at high speeds and when centrifuging dangerous substances, the 250ml and 1000ml sizes must be used in conjunction with sealing screw cap sets.
Centrifuge bottles Nalgene™, PC, with seal closure
For harvesting, pelleting and protein purification of large cell volumes. Polypropylene sealing cap with silicone seal for added leak protection.Good mechanical strengthAutoclavableCrystal clear
Centrifuge bottles Nalgene™, PP-copolymer
PP-copolymer with PP screw cap. Autoclavable.
Centrifuge bottles, PP
Conical centrifuge bottles for large-capacity liquid centrifugation, for large-scale cell harvesting, as well as plasmid and protein purification.GraduatedWith screw capWorking temperature range: -80 °C to 121 °CSterilised by irradiation, SAL 10-6DNase/RNase-free, pyrogen-free
Centrifuge bottles, PPCO
Oval bottle for separating high-volume cell harvests (mammalian, yeast, and bacterial cells).
Centrifuge CVP-2
The CVP-2 enables the simultaneous sample preparation of multiple samples at one time. Versatile through being able to hold non-, semi- and fully-skirted PCR plates with no additional accessories required.Centrifuge and vortex mixer combined for significant time savingIndependent vortex and centrifuge timers with up to 999 cyclesAdjustable rpm or 4 programmable presetsConsistent preparation of up to 192 samples continuously
Centrifuge Frontier™ Multi FC5707, with angle rotor R05
Compact multifunctional centrifuge for general laboratory applications, with splash-proof control panel and touch-wheel control. The pre-installed angle rotor is suitable for round-bottom and conical tubes, as well as for conventional blood tubes.Backlit, two-lined LCD displayQuiet brushless motor10 acceleration and deceleration ratesFast spin for small measurement runsTimer 10 s to 99 h 59 min 59 sMemory for up to 99 programmesLid locking systemImbalance sensorAngle rotor for 8 x 15 ml tubesOptional accessories allow expansion to 7 ml, 5 ml and 1.5/2 mlScope of supply: Centrifuge, 8 x 15 ml angle rotor