Accessories for Rotary Evaporator RC 600 / RC 900
Various collection, evaporator and powder flasks available on request.
Cold trap CT50 Single OLÉ
The cold trap with air-cooled refrigerating unit has been specially developed to offer highly efficient solvent recovery in laboratory conditions. It can be connected to rotary evaporators or any other application requiring low temperatures for solvent recovery.Direct, rapid coolingBright, large OLED displaySimple operation with menu navigationSimultaneous display of set point, internal temperature, Tmin and TmaxUSB and RS232 interfacesAutostart function for power failureNatural refrigerant R290Dimensions probe (Ø x L): 48 x 223 mmScope of supply: Cold trap CT50 Single OLÉ, drip tray
Dry ice condenser for rotary evaporator RV 10/RV 8/RV 3
For distilling low-boiling solvents. The solvent to be distilled can be continuously fed in through the PTFE inlet tube.Cooling by dry ice, no cooling water requiredMax. condensation thanks to low temperatures
Evaporating flasks with conical ground joint, DURAN®
Especially for rotary evaporators, with center neck and conical joint, pear-shaped, material: DURAN®
Evaporating flasks with conical ground joint, DURAN®, with PUR coating
Especially for rotary evaporators, with center neck and conical joint, with highly transparent PUR coating, autoclavable, pear-shaped, material: DURAN®
Evaporator flask pear shape, borosilicate glass 3.3
Pear shaped Evaporator flask with NS 29/32, suitable for all Rotary evaporators.
Evaporator flasks for Rotary Evaporators Hei-VAP Series
With NS 29/32, evaporator flask 50 ml with NS 14.5 incl. adapter.
Glass accessory set for Cold trap CT50 Single OLÉ
Glass accessory set consists of: glass trap body, 3 way vakuum stopcock adapter, receiving flask (1 l), quick release clamp 100 mm, O-ring DN 100.
LLG-Fork clamps for spherical joints
Made of stainless steel 304. For spherical ground joint connections. With set screw.
Membranes for vacuum pumps for Rotavapor
Scope of supply: 2 x membrane with support ring and fastening
Powder flasks with conical ground joint, DURAN®
Specially for rotary evaporators. For the drying of powder-like substances. With center neck and conical joint, with inscription label.
Protective cover for rotary evaporator RE 212 FW-G
Protective cover for the heating bath of the rotary evaporator RE 212 FW-G.
Receiving flasks, DURAN®
Especially for rotary evaporators, with spherical joint socket S 35, autoclavable, material: DURAN®.
Receiving flasks, DURAN®, with PUR coating
Especially for rotary evaporators, with spherical joint socket S 35, autoclavable, material: DURAN®.
Receiving flasks, with spherical ground glass joint, borosilicate glass 3.3
Receiving flasks with spherical ground glass joint KS35 suitable for all Rotary evaporators.
Rotary evaporator package RV 10 auto pro V-C Complete
The complete solution for a rotary evaporator setup. In addition to the RV 10 auto rotary evaporator, the package includes the HB digital heating bath, the VACSTAR digital vacuum pump and the RC 2 lite circulation cooler.Rotary evaporator RV 10 auto with intuitive TFT colour display and integrated vacuum controller with automatic control of the vacuum and cooling water monitoringVacuum pump VACSTAR digital achieves a minimum vacuum of 2 mbar, is controlled directly by the RV 10 auto drive unit via the data cable suppliedCirculating cooler RC 2 lite with 400 W cooling capacity and pressure and suction pump with 0.35 bar for simple cooling tasks down to -10 °CScope of supply: RV10 control rotary evaporator, RV 10.10 glassware, RV 10.70 vapour feed-through tube, HB digital S099 heating bath, VACSTAR digital vacuum pump, H.SI.8 vacuum hose, VSE 1 condenser, RC 2 lite circulation cooler, H 11 mains cable
Rotary evaporator package RV 10 auto Starter Solution
The Starter Solution is the complete package for the rotary evaporator setup. The RV 10 auto offers features such as smooth start, left-right interval and timer function. It impresses with its intuitive operation via a TFT colour graphic display, an integrated vacuum controller, cooling water monitoring and safety standards. The motorised lift has an automated lift-out function in case of power outage to prevent superheating of the solvent. The USB or RS232 interface allows remote control using the IKA software labworldsoft® and the option of updating using the Firmware Update Tool.Scope of supply: rotary evaporator RV 10 auto, VACSTAR lite vacuum pump, HB digital heating bath, vertical glass condenser set with 1 l receiver and evaporator flask, RC 2 lite recirculating chiller, hoses, cable
Rotary evaporator package RV 10 digital pro V Complete
Complete solution for a rotary evaporator setup with the robust and reliable companion for all distillation tasks including heating bath HB digital and vertical glassware. This rotary evaporator is characterised by innovative features and remote control of the various components as well as increased safety through motor-driven lift, safety temperature circuit and dry-running protection.With extremely space-saving vacuum pump VACSTAR digital, which achieves a minimum vacuum of 2 mbar.The vacuum controller VC 10 lite is used for control. In addition to controlling the recirculating cooler RC 2 lite, it enables manual setpoint input of the vacuum as well as programme-controlled operation.The powerful compact RC 2 lite recirculating cooler with 400 W cooling capacity and a strong pressure and suction pump (0.35 bar) is designed for simple cooling tasks down to -10 °C.Scope of supply: Rotary evaporator, vacuum pump VACSTAR digital, vacuum controller VC 10 lite, recirculating cooler RC 2 lite, table stand VC 10.400, hose set RV 10.5005, data cable PC 1.3
Rotary evaporator package RV 10 digital pro V double Complete
Complete solution for a rotary evaporator setup with two rotary evaporators including two HB digital heating baths and two vertical glassware sets are the robust and reliable companions for all distillation tasks. They are characterised by innovative features and remote control of the various components as well as increased safety due to motor-driven lift, safety temperature circuit and dry-running protection.With extremely space-saving vacuum pump VACSTAR digital plus vacuum safety emmision condenser VSE 1. A minimum vacuum of 2 mbar can be achieved. One vacuum source is sufficient to supply both rotary evaporators.Controlling is done via the two included vacuum controllers VC 10 pro.The powerful and energy-efficient RC 2 GREEN basic recirculating chiller is suitable for cooling tasks down to -30 °C. The demand- and speed-controlled compressor achieves a cooling capacity of 800 W.Scope of supply: 2 x Rotary evaporator, vacuum pump VACSTAR digital + vacuum safety emmision condenser VSE 1, 2 x vacuum controller VC 10 pro, recirculating cooler RC 2 GREEN basic, 2 x table stand VC 10.400, 2 x hose set RV 10.5005, 2 x non-return valves VC 10.300, data cable PC 1.3, 2 x Y-distributor
Rotary evaporator package RV 10 digital Starter Solution
The Starter Solution is the complete package for the rotary evaporator setup. The RV 10 digital offers features such as smooth start, left-right interval and timer function. The motorized lift has an automated lift-out function in case of power outage to prevent superheating of the solvent. The RS 232 interface allows for remote control via the software labworldsoft®. The heating bath is controlled from the main unit via the IR interface.Scope of supply: rotary evaporator RV 10 digital Flex, VACSTAR lite vacuum pump, VC 10 lite vacuum controller, HB digital heating bath, vertical glass condenser set with 1 l receiver and evaporator flask, RC 2 lite recirculating chiller, stand pole, set of hoses, cable
Rotary evaporator package RV 3 pro V Complete
Complete solution for a rotary evaporator setup with the ideal entry-level model including heating bath HB eco and vertical glassware.With extremely space-saving vacuum pump VACSTAR digital, which achieves a minimum vacuum of 2 mbar.The vacuum controller VC 10 lite is used for control. In addition to controlling the recirculating cooler RC 2 lite, it enables manual setpoint input of the vacuum as well as programme-controlled operation.The powerful compact RC 2 lite recirculating cooler with 400 W cooling capacity and a strong pressure and suction pump (0.35 bar) is designed for simple cooling tasks down to -10 °C.Scope of supply: Rotary evaporator, vacuum pump VACSTAR digital, vacuum controller VC 10 lite, recirculating cooler RC 2 lite, stand pole VC 10.500, hose set RV 10.5005, data cable PC 1.3