Basket insert for ultrasonic baths Elmasonic, stainless steel
Suitable for baskets 100 high, 100/120 medium and flat.
Baskets for Sonorex Technik ultrasonic baths
Baskets for hanging in bath tanks as outlined below.
Docking station DST 01 for Ultrasonic baths SONOREX smart ST
Easy transfer of the process protocol to other storage media.USB-A, USB-B and Ethernet connection
Flask clips for Sonorex insert baskets
Stainless steel. Suitable for insert baskets and instrument holders with mesh size up to 12.5mm x 12.5mm and for glass holder GL for DT...F. Essential for the attachment of laboratory flasks.
Handle adjusters, GV 3 and GV 10, for Sonorex insert baskets
The immersion depth of the baskets can be continuously adjusted using the handle adjuster prevents laboratory flasks from floating, tipping over or becoming flooded. Quick and easy attachment to insert baskets or utensil holders (except GH 1).1 pair.
Insert beakers for Ultrasonic devices SONOREX, plastic
For positioning lids and beaker holders. With retaining ring.For positioning lids and beaker holders. With retaining ring.
Insert beakers for Ultrasonic devices SONOREX, stainless steel
For positioning lids and beaker holders. With retaining ring.For positioning lids and beaker holders. With retaining ring.
Insert beakers for Ultrasonic devices SONOREX/SONOCOOL, glass
For positioning lids and beaker holders. With retaining ring.For positioning lids and beaker holders. With retaining ring.
Insert tubs for Sonorex ultrasonic baths
Unperforated plastic, with cover. For cleaning with aggressive liquids.
Inset baskets for SONOREX insert beakers
Mesh width: 1 x 1 mm.KD 0: Stainless steel wire basketPD 04: Plastic basket with sieve bottom
Laboratory Flask Holders ZF, stainless steel for insert baskets SONOREX
For fixing of labortory flasks in insert baskets, precise fitting without additional tools. Compartment sizes can be set individually and varied quickly.Scope of delivery:ZF 10: 5 x 155 mm and 3 x 215 mm laboratory flask holdersZF 28: 9 x 215 mm and 4 x 420 mm laboratory flask holders
Lids for Sonorex ultrasonic baths
Stainless steel.For covering bath tanks, as outlined below.
Lids for Sonorex Technik ultrasonic baths
Lids protect against evaporation and reduce operating noise.
Noise protection box ML
Noise protection box with quiet fan and optimal insulation guarantees low-noise cleaning. Any vapours are exhausted via a silenced drain to prevent heat or moisture build-up inside the box. The interior lighting and glass door allow to observe the cleaning process.Noise is reduced by max. 85 %Box can be opened from the top and frontLaterally arranged halogen lampsStainless steel jacketScope of supply: Noise protection box, bottom tray with gland plate, power supply, manualFor use with: Elmasonic Easy 10/20/30/40/60/100/120/180, Elmasonic Select 30/40/60/100/120/180, Elmasonic P 30/60/120/180, Elmasonic Xtra 40/60/120/180
Noise protection box XL
Noise protection box with quiet fan and optimal insulation guarantees low-noise cleaning. Any vapours are exhausted via a silenced drain to prevent heat or moisture build-up inside the box. The interior lighting and glass door allow to observe the cleaning process.Noise is reduced by max. 85 %Box can be opened from the top and frontLaterally arranged halogen lampsStainless steel jacketScope of supply: Noise protection box, 2 bottom trays with gland plate, splash plate, power supply, manualFor use with: Elmasonic Easy 300, Elmasonic Select 80/150/300, Elmasonic P 70/300, Elmasonic Xtra 80/300
Positioning lids for Sonorex ultrasonic baths
Stainless steel.For supporting inset beakers.
Shaking Device SA 1028 for Ultrasonic Bath SONOSHAKE
Analogue setting of time and shaking frequencyReciprocating motion: settings in 4 steps possible of up to 200/minTimer: 1 to 15 min, or continuousConstant amplitude of 20mm independent of loadingRack easy to remove - easy mounting of the laboratory clamps EK 10-250 (separately to order)Footprint approx. 410mm x 280mm (L x W)Holds 36 x 10ml, 36 x 25ml, 18 × 50ml, 12 x 100ml or 10 x 250ml flasksAn existing SONOREX DIGITEC DT1028 F ultrasonic bath can easily be retrofitted with the shaker attachment SA 1028.
Sieve cleaning module SRH 4/200
Sieve cleaning module made of stainless steel with integrated rotary unit for cleaning up to 4 test sieves (Ø up to 200/203 mm) in an ultrasonic bath. The inclined position of the test sieves in the SRH 4/200 ensures a better cleaning and rinsing effect. Thus, the test sieves are cleaned gently and without changing the mesh size or fabric tension. The dimensional accuracy and calibration of the test sieves is maintained 100 %.For use with: Elmasonic Easy 300, Elmasonic Select 300/450/900, Elmasonic S 300/500/900, Elmasonic P 300, Elmasonic Xtra 300
Sound proof boxes USBB series
The USBB series has been developed especially for the noise insulation of ultrasonic baths in the laboratory.Advantages:High noise reduction up to 30dB(A). That means a drop in noise of 90 to 95%Available in four different sizes for mostly all ultrasonic baths, compatibility list for Bandelin Ultrasonic baths on requestThe cover can be completely opened, so the removal of the basket is very easy to handleSmooth and easy handling of the cover, no additional space needed when opening, so the box can be placed and operated under extractor hoodsControl panel stays visible. Thanks to the transparent front, the progress of the washing program can be observed anytimeEquipped with fast access openings on the front and both sides to operate the ultrasonic bath or to drain the cleaning agentIntegrated fan to remove vaporsRecessed grips on the sides for easy transportationPowder coated, robust and easy cleanable surface
Suspension baskets with subdivisions for Sonorex ultrasonic baths
Stainless steel.Optimal ultrasonic wave transmission. Items to be cleaned should not be placed on the bottom of the tank.
Suspension baskets, rectangular for Sonorex ultrasonic baths
Stainless steel.Optimal ultrasonic wave transmission. Items to be cleaned should not be placed on the bottom of the tank.
Suspension baskets, round for Sonorex ultrasonic baths
Stainless steel, adjustable.Optimal ultrasonic wave transmission. Items to be cleaned should not be placed on the bottom of the tank.
Ultrasonic bath 200
Branson Model B-200 tabletop ultrasonic cleaner has the ability to handle a wide variety of applications. This cleaner uses ultrasonic energy (40 kHz) in the form of sound waves to create millions of tiny microscopic vacuum cavities in the solution. As these cavities collapse, they release high frequency energy, loosening dirt on all surfaces that the solution touches. This activity, called cavitation, occurs thousands of times per second to gently yet thoroughly scrub contamination off the article being cleaned. Typical applications include laboratory glassware, instrument parts, small geological samples, metal and plastic machined parts, small electrical/electronic components, recorder and drafting pens, optical components and jewellery. With automatic timer, complete with lid and basket.
Ultrasonic bath BactoSonic® 14.2
Ultrasonic special bath for a gentle removal of biofilms.Scope of supply: Ultrasonic bath