Disposable data logger TempLOG TS60
Ideal for low-cost temperature monitoring of transports. For evaluation, the data logger is connected to the USB interface and a PDF report is generated automatically. No hardware or software necessary.Auto generating PDF format data report60 days runtime10000 measurements every 10 minutesChange of configuration (alarm, interval ...) on requestIntegrated USB connectorStart by buttonLED Alarm displaySerial number stickerInclusive certificateFood-safe according to HACCPCompliant to EN12830 S,T,C,D,1 and GDP
Disposable data logger TempMate-S1
The single-use data logger TempMate-S1 with its built-in USB connector, is the ideal solution for low-cost temperature monitoring of transports. TempMate-PDF loggers directly useable with pre-programmed configuration or reprogrammable with Tempbase Software according to each customer's specifications. To download the recorded data, simply connect TempMate-S1 directly to the USB port. A PDF and CSV report will automatically be generated, covering temperature graph, detailed data list and statistical information. No hardware (cable, interface) or software is required.Auto generating PDF and CSV format data report110 days run time 16000 measurements, 10 minute intervalReprogrammable with Tempbase Software free of chargeUp to 5 alarm points configurableIntegrated USB connectorLED Alarm indicatorsSerial number stickerInclusive certificateFood proof according to HACCP
Double Temperature Probe PT 100 Lemo Compact
Temperature probe with two independent temperature elements and two Lemo-connectors.Particularly useful for parallel evaluation of values measured in aggressive media (temperature range: -200°C to +250°C). The temperature elements are located in a stainless steel core which isentirely sealed in a solid and seamless PTFE coating. This provides high chemical resistance and rigity, however, the probe can be bent manually to the desired shape. The tip of the probe is smaller (6mm dia.) for faster measurement response. 2 x Lemo size 1 connectors, with 4 cores. Both connectors are situated directly at the end of the probe. It can easily be used for further applications without removing any cables.
Dual Infrared Thermometer TFI 550 with NiCr-Ni Connection
Addtional connection for NiCr-Ni temperature probes with SMP-connection.Optics D:S = 30:1Dual laserNiCr-Ni connection for core temperature measurement with penetration probeAlarm when Min/Max exceededFactory calibration certificateResolution: 0.1 °C (-9.9 to 199.9 °C, otherwise 1 °C)Please order probes separately.
Exchangeable Pt 1000 probes TPX 25 for wireless temperature data logger EBI 25-TX
Extension cable for thermometer TFX 430/GFX 460
Extension cable made of silicone with LEMO connector size 1.
External temperature probe for data logger LOG200E/LOG220E
Pt 100 temperature probe with 1/3 DIN sensor and cable.
Fast printer IRDA for testo measuring devices
Universal printer with IRDA and infrared interface for documenting measurement data.Scope of supply: Printer, 1 x roll thermal paper, 4 x AA batteries
Food and frozen goods thermometers, Type 105
One-handed penetration thermometer. For measurements according to the EU Directive (EN13485) concerning the control of foodstuffs (HACCP). Waterproof, can be rinsed. With battery.
Food penetration probe, NTC, TUC connector, with special handle
Robust food probe is suitable for measuring the core temperature of food. The special handle facilitates handling when measuring the core temperature of semi-solid food. The probe is EN 13485 tested, and HACCP compliant. With permanently connected cable. Sensor cable made of PUR.Temperature accuracies:±0.2 °C (-25 to 74.9 °C)±0.5 % of mv (100 to 150 °C)±0.4 °C (remaining measuring range)
Frozen food sensor, NTC, TUC connector
Frozen food probe is suitable for measuring the core temperature of frozen food. The special handle and its helical tip can be screwed directly into the frozen food without the need for pre-drilling. The probe is EN 13485 tested, and HACCP compliant. With plug-in cable.Temperature accuracies:±0.2 °C (-25 to 75 °C)±0.5 % of mv (100 to 140 °C)±0.4 °C (remaining measuring range)
General purpose thermometer, enclosed-scale type, green filling
Environmentally friendly thermometer, with biodegradable filling, with ring at top, milk glass scale, uncoated, prismatic measuring capillary, in transparent square plastic case.
General purpose thermometers, solid stem
Thermometer in transparent square palstic case. Top with ring.Scale background in whiteDurable pigmentImmersion depth: Total
General-purpose thermometer set
Set consisting of 5 general-purpose thermometers which cover a temperature range up to 250 °C. All thermometers have a prismatic, uncovered measuring capillary and are fully immersion-adjusted.
General-purpose thermometers, blue filling
Glass, solid stem, white backed. Environmentally friendly thermometer, with blue filling. With serial number and certificate (conformity and accuracy). Single packed in plastic square shucks.Immersion depth: Total
General-purpose thermometers, blue filling, with safety coating
Glass, solid stem, white backed. Environmentally friendly thermometer, with blue filling. With serial number and certificate (conformity and accuracy). Usable as stirring thermometer. With temperature resistant safety coating up to 250 °C. Single packed in plastic square shucks.Immersion depth: Total
General-purpose thermometers, red filling
Glass, solid stem, with loop, white backed. With red organic filling. Single packed in plastic square shucks.Immersion depth: Total
General-purpose thermometers, red filling, with safety coating
Glass, solid stem, with loop, white backed. With red organic filling. Single packed in plastic square shucks. Can be used as a stirring thermometer. With temperature resistant safety coating up to 250 °C. Single packed in plastic square shucks.Immersion depth: Total
Glass sensor Pt 100 with adapter sleeve for PHYSICS 100
Resistance temperature probes Pt 100, class A, 4-wire connectionConnection-wire teflon/silicone isolated, with PHYSICS-PlugProbe made of glass N 16 BInstrument and thermometer combination, optional, available with calibration
Globe thermometer for testo measuring instruments
Globe thermometer for measuring radiant heat acc. to ISO 7243, ISO 7726, DIN EN 27726, and DIN 33403.
Hand held thermometer Type 13100
Digital temperature measuring device with 2 input channels, incl. 1 sensor with flat plug (measuring range up to approx. 150 °C, cable length: 3 m). For measuring sensors type K (NiCr-Ni). Measuring range: -200 ...1370 °C / -328 ... 2498 °F. Resolution: 0.1 °C/F. Accuracy: ± 0.1 %. With hold function, with max/min memory and automatic switch-off after 30 min. With PC interface and bag. Battery: 1 x 9 V block. Dimensions: 184 x 64 x 30 mm
High precision PDF data logger EBI 310
PDF data logger with different temperature sensors. Compared to the EBI 300, the EBI 310 is characterized by shorter measuring intervals and higher storage capacity.Automatic PDF-report creation with temperature/time valuesTransport of drugs, inoculants, blood products and primary productsTransport of all temperature sensitive productsStorage of reference samples in refrigerators and deep-freezers"Traffic light principle" by limit exceededIQ/OQ procedures through standardized software and standard reporting process possibleGMP, pharmaceutical law compliant; EN 12830, ATP, VO (EG) 37/205 compliant, 21 CFR Part 11 conform (Winlog.basic)Programmable via the free online configurator at www.ebi300.comMeasuring modes: Start/Stop, endless loop, start with buttonAlarms: 5 valuesMemory capacity: 120000 measurementsData logger with internal temperature sensor.
High precision PDF data logger EBI 310 TE, with external temperature sensor TPX 220
PDF data logger with different temperature sensors. Compared to the EBI 300, the EBI 310 is characterized by shorter measuring intervals and higher storage capacity.Automatic PDF-report creation with temperature/time valuesTransport of drugs, inoculants, blood products and primary productsTransport of all temperature sensitive productsStorage of reference samples in refrigerators and deep-freezers"Traffic light principle" by limit exceededIQ/OQ procedures through standardized software and standard reporting process possibleGMP, pharmaceutical law compliant; EN 12830, ATP, VO (EG) 37/205 compliant, 21 CFR Part 11 conform (Winlog.basic)Programmable via the free online configurator at www.ebi300.comMeasuring modes: Start/Stop, endless loop, start with buttonAlarms: 5 valuesMemory capacity: 120000 measurementsData logger with external precision temperature sensor, internal temperature sensor can be used additionally. Measurements in high and low temperature range.
High precision PDF data logger EBI 310 TH
PDF data logger with external humidity and temperature sensor TPH 500, internal temperature sensor can be used additionally. Monitoring the relative humidity in storage and transport. Compared to the EBI 300, the EBI 310 is characterized by shorter measuring intervals and higher storage capacity.Automatic PDF-report creation with temperature/time valuesTransport of drugs, inoculants, blood products and primary productsTransport of all temperature sensitive productsStorage of reference samples in refrigerators and deep-freezers"Traffic light principle" by limit exceededIQ/OQ procedures through standardized software and standard reporting process possibleGMP, pharmaceutical law compliant; EN 12830, ATP, VO (EG) 37/205 compliant, 21 CFR Part 11 conform (Winlog.basic)Programmable via the free online configurator at www.ebi300.comMeasuring modes: Start/Stop, endless loop, start with buttonAlarms: 5 values
High precision PDF data logger EBI 310 TX, with temperature dual adapter TPX 310
PDF data logger with different temperature sensors. Compared to the EBI 300, the EBI 310 is characterized by shorter measuring intervals and higher storage capacity.Automatic PDF-report creation with temperature/time valuesTransport of drugs, inoculants, blood products and primary productsTransport of all temperature sensitive productsStorage of reference samples in refrigerators and deep-freezers"Traffic light principle" by limit exceededIQ/OQ procedures through standardized software and standard reporting process possibleGMP, pharmaceutical law compliant; EN 12830, ATP, VO (EG) 37/205 compliant, 21 CFR Part 11 conform (Winlog.basic)Programmable via the free online configurator at www.ebi300.comMeasuring modes: Start/Stop, endless loop, start with buttonAlarms: 5 valuesMemory capacity: 120000 measurementsData logger with temperature dual adapter for two exchangeable temperature sensors (not included in the scope of supply), internal temperature sensor can be used additionally.
High precision thermometer PHYSICS 1000
The digital measuring device PHYSICS 1000 offers highest resolution, precision, and linearity for mains-independent temperature measurements. Ideal for reliable and reproducible measurement results in production control, process monitoring and quality assurance in the chemical and pharmaceutical industries, the food industry, as well as in research and development.Reference measuring device for temperature with 2 input and 2 output channelsHighest accuracy by multi-point adjustment of the Pt100 temperature sensorMeasuring functions: Measuring value, zero-setting, max.-/min. value documentation, 2-step adjustment, scalingTest functions: Segment monitoring, range monitoring, probe error checkDisplay of min./max. values, average over time, individual values, or measuring pointsInternal memory for 100 measured valuesWith USB, RS232, Ethernet, Bluetooth, and analogue interfacesLanguage selection: German, English, FrenchOptional memory stick for approx. 25000 measured valuesOptional multi-point calibrationScope of supply: High precision thermometer, 3 x AA batteriesPlease order temperature sensor separately.
High precision Thermometers PHYSICS 100
For process monitoring and quality assurance with reliable and stable measuring results. For resistance thermometers Pt 100, thermocouples, NTC's, and many more parameters.Inputs for more than 65 rangesUp to 2 input connections for measuring at 2 different places4 channels per input, e.g. for double sensors2 outputs: USB, V24, Ethernet, BluetoothMax.-/Min. value, Average value for time, single values or measuring pointsMemory: 100 valuesMultilingual: German, English, FrenchEvaluation: Data and measuring intervals can be evaluated with SoftwarePower supply: 3 x Mignon Alkaline or mains adapterTemperature probes not included. Please order separately.
Humidity/temperature probe with cable
The digital humidity/temperature probe is suitable for measuring temperature and relative humidity in storage rooms, cold rooms and workrooms or in air conditioning/ventilation ducts.
Immersion probe, thermocouple Type K
Immersion probe for measuring in liquid, gaseous, and powdery media. Flexible, without handle and sensor cable. Miniature connector. Accuracy class 1. According to EN 60584-1.
Immersion probe, thermocouple Type K, with handle
Immersion probe for measuring in liquid, gaseous, and powdery media. Flexible, with handle and sensor cable. Accuracy class 1. According to EN 60584-1.
Immersion probe, thermocouple Type K, without handle
Immersion probe without handle, with sensor cable. Accuracy class 1. According to EN 60584-1.
Immersion/insertion probe, thermocouple Type K
Immersion/insertion probe for measuring in liquid, gaseous, and powdery media. With handle, miniature connector, and sensor cable. Accuracy class 2. According to EN 60584-1.
Infra-red thermometer ScanTemp 385
With IR thermometers you can measure surface temperature. A short response time and non-contact measurement are key advantages. Ideal for monitoring applications such as:Moving parts (running paper webs...)Registering the surface temperature of gears and motorsChecking live electrical parts (components, transformers...)Newly coated or painted partsFood and corrosive substancesPrecision: ±2 % or 2 °C, the higher value counts