


Combination probe temperature/humidity for PDF data logger LOG40
Combination probe for measuring temperature and relative humidity.

Combination probe temperature/humidity/pressure for PDF data logger LOG40
Combination probe for measuring temperature, relative humidity, and barometric pressure.

Data Logger LOG32T
Data logger with integrated USB interface for temperature recording. Ideal for monitoring storage and transport conditions in accordance with HACCP (EN 12830).Incl. calibration certificateMemory for 60 000 readingsUsable without software (pre-programmed 15-minute reading interval)Freely adjustable memory interval from 30 seconds to 24 hours (via free Log Connect software)Automatic output as PDF file (logger is recognized like USB memory stick)Battery lifetime > 3 years (with recording interval >15 minutes)Status and alarm LEDs with acoustic signal (buzzer)Wall mount includedEN12830 compliantIP65 waterproof

Data Logger with external temperature sensor EBI 20-TE1
Applications:TransportStorage monitoringRefrigeration areas and cold roomsFeatures:WaterproofVisual alarmMax/min values on displayStores 40000 readings, can be read off at any timeReplaceable batteryMeasuring mode: immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressedAccuracy: ±0.5 °C (-20 to 40 °C); ±0.8 °C for remaining measuring rangeScope of supply: Temperature Logger with external sensor

Data Logger with external temperature sensor EBI 20-TE1-Set
Applications:TransportStorage monitoringRefrigeration areas and cold roomsFeatures:WaterproofVisual alarmMax/min values on displayStores 40000 readings, can be read off at any timeReplaceable batteryMeasuring mode: immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressedAccuracy: ±0.5 °C (-20 to 40 °C); ±0.8 °C for remaining measuring rangeScope of supply: Temperature Logger with external sensor, evaluation software, Interface

Data Logger with internal temperature sensor EBI 20-T1
Applications:TransportStorage monitoringRefrigeration areas and cold roomsFeatures:WaterproofVisual alarmMax/min values on displayStores 40000 readings, can be read off at any timeReplaceable batteryMeasuring mode: immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressedAccuracy: ±0.5 °C (-20 to 40 °C); ±0.8 °C for remaining measuring rangeScope of supply: Temperature logger

Data Logger with internal temperature sensor EBI 20-T1-Set
Applications:TransportStorage monitoringRefrigeration areas and cold roomsFeatures:WaterproofVisual alarmMax/min values on displayStores 40000 readings, can be read off at any timeReplaceable batteryMeasuring mode: immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressedAccuracy: ±0.5 °C (-20 to 40 °C); ±0.8 °C for remaining measuring rangeScope of supply: Temperature logger, evaluation software, interface

Disposable data logger TempLOG TS60
Ideal for low-cost temperature monitoring of transports. For evaluation, the data logger is connected to the USB interface and a PDF report is generated automatically. No hardware or software necessary.Auto generating PDF format data report60 days runtime10000 measurements every 10 minutesChange of configuration (alarm, interval ...) on requestIntegrated USB connectorStart by buttonLED Alarm displaySerial number stickerInclusive certificateFood-safe according to HACCPCompliant to EN12830 S,T,C,D,1 and GDP

Disposable data logger TempMate-S1
The single-use data logger TempMate-S1 with its built-in USB connector, is the ideal solution for low-cost temperature monitoring of transports. TempMate-PDF loggers directly useable with pre-programmed configuration or reprogrammable with Tempbase Software according to each customer's specifications. To download the recorded data, simply connect TempMate-S1 directly to the USB port. A PDF and CSV report will automatically be generated, covering temperature graph, detailed data list and statistical information. No hardware (cable, interface) or software is required.Auto generating PDF and CSV format data report110 days run time 16000 measurements, 10 minute intervalReprogrammable with Tempbase Software free of chargeUp to 5 alarm points configurableIntegrated USB connectorLED Alarm indicatorsSerial number stickerInclusive certificateFood proof according to HACCP


Exchangeable Pt 1000 probes TPX 25 for wireless temperature data logger EBI 25-TX
External temperature probe for data logger LOG200E/LOG220E
Pt 100 temperature probe with 1/3 DIN sensor and cable.

High precision PDF data logger EBI 310
PDF data logger with different temperature sensors. Compared to the EBI 300, the EBI 310 is characterized by shorter measuring intervals and higher storage capacity.Automatic PDF-report creation with temperature/time valuesTransport of drugs, inoculants, blood products and primary productsTransport of all temperature sensitive productsStorage of reference samples in refrigerators and deep-freezers"Traffic light principle" by limit exceededIQ/OQ procedures through standardized software and standard reporting process possibleGMP, pharmaceutical law compliant; EN 12830, ATP, VO (EG) 37/205 compliant, 21 CFR Part 11 conform (Winlog.basic)Programmable via the free online configurator at www.ebi300.comMeasuring modes: Start/Stop, endless loop, start with buttonAlarms: 5 valuesMemory capacity: 120000 measurementsData logger with internal temperature sensor.

High precision PDF data logger EBI 310 TE, with external temperature sensor TPX 220
PDF data logger with different temperature sensors. Compared to the EBI 300, the EBI 310 is characterized by shorter measuring intervals and higher storage capacity.Automatic PDF-report creation with temperature/time valuesTransport of drugs, inoculants, blood products and primary productsTransport of all temperature sensitive productsStorage of reference samples in refrigerators and deep-freezers"Traffic light principle" by limit exceededIQ/OQ procedures through standardized software and standard reporting process possibleGMP, pharmaceutical law compliant; EN 12830, ATP, VO (EG) 37/205 compliant, 21 CFR Part 11 conform (Winlog.basic)Programmable via the free online configurator at www.ebi300.comMeasuring modes: Start/Stop, endless loop, start with buttonAlarms: 5 valuesMemory capacity: 120000 measurementsData logger with external precision temperature sensor, internal temperature sensor can be used additionally. Measurements in high and low temperature range.

High precision PDF data logger EBI 310 TX, with temperature dual adapter TPX 310
PDF data logger with different temperature sensors. Compared to the EBI 300, the EBI 310 is characterized by shorter measuring intervals and higher storage capacity.Automatic PDF-report creation with temperature/time valuesTransport of drugs, inoculants, blood products and primary productsTransport of all temperature sensitive productsStorage of reference samples in refrigerators and deep-freezers"Traffic light principle" by limit exceededIQ/OQ procedures through standardized software and standard reporting process possibleGMP, pharmaceutical law compliant; EN 12830, ATP, VO (EG) 37/205 compliant, 21 CFR Part 11 conform (Winlog.basic)Programmable via the free online configurator at www.ebi300.comMeasuring modes: Start/Stop, endless loop, start with buttonAlarms: 5 valuesMemory capacity: 120000 measurementsData logger with temperature dual adapter for two exchangeable temperature sensors (not included in the scope of supply), internal temperature sensor can be used additionally.

Immersion probe, thermocouple Type K
Immersion probe for measuring in liquid, gaseous, and powdery media. Flexible, without handle and sensor cable. Miniature connector. Accuracy class 1. According to EN 60584-1.

Immersion probe, thermocouple Type K, with handle
Immersion probe for measuring in liquid, gaseous, and powdery media. Flexible, with handle and sensor cable. Accuracy class 1. According to EN 60584-1.

Immersion probe, thermocouple Type K, without handle
Immersion probe without handle, with sensor cable. Accuracy class 1. According to EN 60584-1.

Immersion/insertion probe, thermocouple Type K
Immersion/insertion probe for measuring in liquid, gaseous, and powdery media. With handle, miniature connector, and sensor cable. Accuracy class 2. According to EN 60584-1.

Insertion probe, thermocouple Type K
Insertion probe for measuring in solid, liquid, and pasty media. With handle and sensor cable. Accuracy class 1. According to EN 60584-1.

Insertion probe, thermocouple Type K, heat-resistant
Insertion probe with handle and sensor cable made of PTFE. The entire probe is heat-resistant up to 250 °C. Accuracy class 1. According to EN 60584-1.

Mini temperature data logger EBI 11 starter kit SK 6100
Robust temperature data logger EBI 11-T210 for pasteurization control during production. The data logger is characterized by its small size and can be incorporated into the product in bottles, tins, and jars to measure the temperature. With the IF 300 interface and the Winlog.pro software included in the starter kit, the temperature data logger can be programmed, and the recorded data read out.Space-saving stainless steel housingVersatile useM5 threadAxial, pointed PT1000 probe (Ø 3 mm)Needle length 20 mmMemory for up to 15000 measured valuesFactory calibration certificate: 0 °C, 60 °C, and 134 °CScope of supply: Temperature data logger, software Winlog.pro, interface IF 300

Mini temperature data logger EBI 11-T210
Robust temperature data logger for pasteurization control during production. The data logger is characterized by its small size and can be incorporated into the product in bottles, tins, and jars to measure the temperature.Space-saving stainless steel housingVersatile useM5 threadAxial, pointed PT1000 probe (Ø 3 mm)Needle length 20 mmMemory for up to 15000 measured valuesFactory calibration certificate: 0 °C, 60 °C, and 134 °CScope of supply: Temperature data logger

Mini temperature data logger testo 174 T
The mini temperature data logger is used for seamless temperature monitoring in the food and pharmaceutical industries. The device can store up to 16000 measured values and guarantees reliable protection against data loss thanks to automatic data backup in the event of an empty battery or battery change. Data can be read out quickly and easily via the USB-C interfaces without a separate read-out station. The free ComSoft Basic software enables quick configuration and simple data analysis. It offers Excel export and PDF report generation, ensuring professional documentation. Temperature accuracy ±0.5 °C. Certified according to HACCP, EN 12830 and NSF.Scope of supply: Mini temperature data logger, wall bracket, batteries, USB 2.0 data transfer cable, test report

Mini temperature data logger testo 174 T BT
The mini temperature data logger is used for seamless temperature monitoring in the food and pharmaceutical industries. The device can store up to 16000 measured values and guarantees reliable protection against data loss thanks to automatic data backup in the event of an empty battery or battery change. Thanks to the Bluetooth® connection, data can be read out directly at the measuring point up to 30 m away. The free testo Smart App enables simple and intuitive configuration as well as analysis of the measurement data. PDF reports and Excel exports can also be created in the app and supplemented with photos and comments. Temperature accuracy ±0.5 °C. Certified according to HACCP, EN 12830 and NSF.Scope of supply: Mini temperature data logger, wall bracket, batteries, test report

Mobile printer for testo data loggers
Compact printer with USB/NFC interface for documenting measurement data directly at the measurement location.testo 184: Connection set-up wirelessly via NFC technologytesto 175 and 176: Connection set-up via supplied USB cableScope of supply: Printer, rechargeable battery, micro USB charging cable, micro/mini USB connecting cable, manual

Online temperature data logger testo 160 T
Online data logger for automated temperature monitoring with an internal temperature sensor. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 32000 measured valuesTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Scope of supply: Online temperature data logger, wall bracket, USB interface cable, 4 x AAA batteries, 2 x QR code sticker, test protocol

Online temperature data logger testo 162 Refrigerator set
Online data logger for automated temperature monitoring. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 10000 measured values per channelTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Set for temperature monitoring in the refrigerator.Scope of supply: Online temperature data logger testo 162 T2, 2 x NTC ribbon cable temperature probe (0572 1001), 2 x glycol flask, micro USB cable, wall bracket with lock, 4 x AA batteries, short instructions, test protocol

Online temperature data logger testo 162 T1, with integrated NTC temperature sensor
Online data logger for automated temperature monitoring. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 10000 measured values per channelTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Scope of supply: Online temperature data logger, micro USB cable, wall bracket with lock, 4 x AA batteries, short instructions, test protocol

Online temperature data logger testo 162 T2, with two connections for NTC temperature sensors
Online data logger for automated temperature monitoring. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 10000 measured values per channelTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Temperature measuring range depends on the temperature sensor used.Please order NTC temperature sensor seprarately.Scope of supply: Online temperature data logger, micro USB cable, wall bracket with lock, 4 x AA batteries, short instructions, test protocol

Online temperature data logger testo 162 T3, with two connections for TC temperature sensors
Online data logger for automated temperature monitoring. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 10000 measured values per channelTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Temperature measuring range depends on the temperature sensor used.Please order TC (thermocouple) temperature sensor seprarately.Scope of supply: Online temperature data logger, micro USB cable, wall bracket with lock, 4 x AA batteries, short instructions, test protocol