Accessories for EBI 25 data loggers
Accessories for EBI 25 temperature and humidity data loggers.
Data logger LOG32THP
Temperature-humidity-pressure logger with integrated USB-interface and automatic PDF-creation.Incl. calibration certificateMemory for 3 x 60000 readingsUseable without software (pre-programmed reading interval of 5 minutes)Automatic output as PDF file (no drivers required)Free adjustable recording interval from 30 seconds up to 24 hours (via Software Log Connect)Battery life > 2 years (with recording interval >15 minutes)Status and alarm LEDsWith wall mount, fixing screws, an battery (1/2 AA, 3.6 V)
External temperature probe for data logger LOG200E/LOG220E
Pt 100 temperature probe with 1/3 DIN sensor and cable.
High precision PDF data logger EBI 310 TH
PDF data logger with external humidity and temperature sensor TPH 500, internal temperature sensor can be used additionally. Monitoring the relative humidity in storage and transport. Compared to the EBI 300, the EBI 310 is characterized by shorter measuring intervals and higher storage capacity.Automatic PDF-report creation with temperature/time valuesTransport of drugs, inoculants, blood products and primary productsTransport of all temperature sensitive productsStorage of reference samples in refrigerators and deep-freezers"Traffic light principle" by limit exceededIQ/OQ procedures through standardized software and standard reporting process possibleGMP, pharmaceutical law compliant; EN 12830, ATP, VO (EG) 37/205 compliant, 21 CFR Part 11 conform (Winlog.basic)Programmable via the free online configurator at www.ebi300.comMeasuring modes: Start/Stop, endless loop, start with buttonAlarms: 5 values
Humidity/temperature probe with cable
The digital humidity/temperature probe is suitable for measuring temperature and relative humidity in storage rooms, cold rooms and workrooms or in air conditioning/ventilation ducts.
Mini temperature humidity logger testo 174 H
The mini temperature humidity logger is used to monitor temperature and humidity-sensitive goods and to check the indoor climate. The device can store up to 16000 measured values and guarantees reliable protection against data loss thanks to automatic data backup in the event of an empty battery or battery change. Data can be read out quickly and easily via the USB-C interfaces without a separate readout station. The free ComSoft Basic software enables quick configuration and simple data analysis. It offers Excel export and PDF report generation, ensuring professional documentation. Certified according to HACCP.Scope of supply: Mini temperature humidity logger, wall bracket, batteries, USB 2.0 data transfer cable, test report
Mini temperature humidity logger testo 174 H BT
The mini temperature humidity logger is used to monitor temperature and humidity-sensitive goods and to check the indoor climate. The device can store up to 16000 measured values and guarantees reliable protection against data loss thanks to automatic data backup in the event of an empty battery or battery change. Thanks to the Bluetooth® connection, data can be read out directly at the measuring point up to 30 m away. The free testo Smart App enables simple and intuitive configuration as well as analysis of the measurement data. PDF reports and Excel exports can also be created in the app and supplemented with photos and comments. Certified according to HACCP.Scope of supply: Mini temperature humidity logger, wall bracket, batteries, test report
Mini temperature/pressure data logger EBI 11-TP210
The temperature/pressure data logger is specifically designed to measure temperature and pressure inside a bottle for pasteurization control.Space-saving stainless steel housingWireless measurementM5 threadTemperature-compensated pressure measurement over the complete measuring rangePT1000 temperature probe and piezoresistive pressure sensorMemory for up to 2 x 7500 measured valuesFactory calibration certificate: 0 °C, 60 °C, and 134 °C / 100 mbar, 3100 mbar, and 6000 mbar at 25 °C, 3100 mbar at 134 °CScope of supply: Temperature/pressure data logger
Online data logger testo 160 E
Online data logger with two connections for external sensors for automated monitoring of temperature, humidity, LUX and UV. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 32000 measured valuesTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Measuring ranges depend on the sensor used. Please order sensors separately.Scope of supply: Online data logger, wall bracket, USB interface cable, 4 x AAA batteries, 2 x QR code sticker, test protocol
Online data logger testo 162 IAQ
Online data logger for automated monitoring of temperature, humidity, CO2 and atmospheric pressure with integrated sensors. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 32000 measured valuesMeasuring cycle (battery operation): 5 min to 24 hMeasuring cycle (power adapter): 1 min to 24 hTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Scope of supply: Online data logger, micro USB cable, wall bracket with lock, 4 x AA batteries, short instructions, test protocol, power adapter
Online humidity data logger testo 160 TH
Online data logger for automated temperature and humidity monitoring with an integrated temperature and humidity sensor. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 32000 measured valuesTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Scope of supply: Online humidity data logger, wall bracket, USB interface cable, 4 x AAA batteries, 2 x QR code sticker, test protocol
Online humidity data logger testo 162 H1, with integrated temperature and humidity sensor
Online data logger for automated temperature and humidity monitoring. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 10000 measured values per channelTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Scope of supply: Online humidity data logger, micro USB cable, wall bracket with lock, 4 x AA batteries, short instructions, test protocol
Online humidity data logger testo 162 H2, with one connection for temperature and humidity sensor
Online data logger for automated temperature and humidity monitoring. Measurement values are recorded and sent directly to the testo Saveris Cloud via an existing WLAN connection. In the cloud, data loggers can be configured, limit value alarms can be set and measurement data can be viewed and analysed. Thanks to the option of connecting to the testo Smart App, all measurement values can also be called up at any time and from anywhere using an internet-enabled smartphone, tablet or PC.Data transmission via WLANAutomatic measurement value documentation in testo Saveris CloudAlerting if limit values are exceeded via email, SMS or push notification (testo Smart App)Visual inspection on site thanks to large displayMemory for 10000 measured values per channelTo operate the online data logger in the testo Saveris Cloud, a valid licence (subject to a charge) must be booked (Data Monitoring Licence).Temperature and humidity measuring range depends on the sensor used.Please order temperature and humidity sensor separately.Scope of supply: Online humidity data logger, micro USB cable, wall bracket with lock, 4 x AA batteries, short instructions, test protocol
PTFE filter AH 100
The PTFE filter makes humidity probes dust-tight (IP 60) and thus prevents affecting the humidity measurement.
Stainless steel sintered filter AH 300
The stainless steel sintered filter increases the protection class to IP 40. The stainless steel used increases the mechanical protection and is highly resistant to corrosion, even in high-temperature applications.
Standard PDF data logger EBI 300 TH
PDF data logger with external humidity and temperature sensor TPH 400, internal temperature sensor can also be used.For temperature monitoring related to HACCP/IFS issues or other perishable goodsTransportation of fresh, cool and deep cool productsMonitoring of fridges and deep freezersEvaluation without software, PDF are automatically generatedMinimise training, user errors and IT costs using EBI 300's simple, easy to use design and standard softwareEnsure data integrity since no data manipulation is possibleEN 12830, ATP, VO(EG) 37/2005 CompliantFactory calibration certificate includedProgrammable via the free online configurator at www.ebi300.comNo separate interface for programming and readingMemory: 40000 samplesMeasuring modes: Start/Stop, endless loop, start with buttonAlarms: 2 values, high and low limits
Temperature and humidity logger LOG210 TC
Data logger with motion sensor, integrated USB interface for automatic PDF output and wall mount. For measurement and recording of temperature and humidity and 2 connections for external type K thermocouples.Freely adjustable recording interval from 10 seconds to 24 hoursMin- and Max-values can be reset in the displayTime marking function ("Time Marker") during data recordingWith movement sensor for shock recordingMemory for approx. 60000 measurementsAutomatic output as PDF file, device can also be used without softwareNo driver installation neededStatus and alarm LEDs, with buzzerDisplay can be switched offBattery life > 4 years at > 15 min measuring interval (free of charge)USB interface for data transferSoftware available for download on the manufacturer's websiteTemperature and humidity sensors are available separately.Scope of supply: Data logger, 2 thermocouples type K (1 m length), wall mount, battery (1/2 AA, 3.6 V), USB cover, screws and dowels
Temperature and humidity sensor with with plug-in cable
Small, precise sensor for measuring temperature and relative humidity in display cabinets. The cable can be easily by replaced with a longer cable. No effect on the air exchange rate in the display cabinet thanks to the supplied wall bushing with O-ring seal.Accuracy humidity:±1.0 %RH hysteresis±1.0 %RH/year drift±2.0 %RH at 25.0 °C and 20 to 80 %RH±3.0 %RH at 25.0 °C and <20 %RH and >80 %RH
Temperature, humidity, pressure and CO2 logger LOG220E
Data logger for temperature, humidity and pressure recording with an external connection for a CO2 sensor or humidity, pressure and temperature sensor.Freely adjustable recording interval from 10 seconds to 24 hoursMin- and Max-values can be reset in the displayTime marking function ("Time Marker") during data recordingWith movement sensor for shock recordingMemory for approx. 60000 measurementsAutomatic output as PDF file, device can also be used without softwareNo driver installation neededStatus and alarm LEDs, with buzzerDisplay can be switched offBattery life > 4 years at > 15 min measuring intervalUSB interface for data transferSoftware available for download on the manufacturer's website (free of charge)Temperature, pressure humidity and CO2 sensors are available separately.Scope of supply: Data logger, wall mount, battery (1/2 AA 3.6 V), USB cover, screws and dowels
Temperature-humidity data logger EBI 12-TH100-EX
Robust data logger for precise measurement of relative humidity during process validation of sterilization processes with ethylene oxide.1 external PT1000 temperature sensor1 external capacitive humidity sensorCombined sensor replaceableReal-time data transmissionStorage modes: Endless measurement, measurement upon start time, measure immediately until end of memory, start/stop measurementMemory for up to 50160 measured values per measurement channelStainless steel housingFactory calibration certificate: 0 °C and 60 °C; 32.8 %rH, 52.9 %rH, and 75.4 %rH at 25 °CApproved for use in EX areas: II1G Ex ia IIC T4 Ga
Temperature-humidity data logger Traceable®
Data logger with integrated sensors for monitoring temperature and relative humidity. The data logger can be connected to a Bluetooth®-enabled mobile device via the Bluetooth® interface. With the TraceableGO™ app (free of charge) or the TraceableLIVE™ cloud service (chargeable, registration required), measured values can be exported as a PDF, sent by e-mail, and stored on a mobile end device.Large LCD displayDisplay changes between temperature and humidity every 5 secondsSwitchable °C/°FLimit values and logging interval adjustable via TraceableGO™ or TraceableLIVE™ appStorage of up to 90 different alarm messagesMemory: 65536 measuring valuesNIST-traceable certificate includedScope of supply: Temperature-humidity data logger, batteries, NIST-traceable calibration certificate
Temperature-humidity logger LOG32TH
Data logger for monitoring and recording temperature and humidity during the storage and transportation of sensitive products. Measurement data can be transferred to a PC via the integrated USB interface, and evaluated and documented using the free LOG CONNECT software.Incl. calibration certificateMemory for 2 x 60000 data recordsUsable without software, with pre-programmed reading interval of 5 minutesFreely adjustable recording interval from 30 seconds to 24 hoursAutomatic output as PDF file (logger is recognized like USB memory stick)Battery life >2 years (with recording interval >5 minutes)Status and alarm LEDsIncl. wall mount and battery (1/2 AA, 3.6 V)Application profile:Quality monitoring in the laboratory, during production or in the warehouseAmbient conditions in production facilitiesMonitoring storage and transport conditions in accordance with HACCPAmbient conditions in power plantsMonitoring of refrigerators for pharmaceuticals
Temperature/Humidity data logger EBI 20-TH1
Applications:Reliable temperature and temperature/humidity recordingTransportStorage monitoringRefrigeration areas and coldroomsFeatures:Excellent price/performance ratioVisual AlarmMax./min. values on displayStores 40000 readings, can be read off at any timeReplaceable batteryMeasuring mode: immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressedScope of supply: Temperature/Humidity logger
Temperature/Humidity data logger EBI 20-TH1-Set
Applications:Reliable temperature and temperature/humidity recordingTransportStorage monitoringRefrigeration areas and coldroomsFeatures:Excellent price/performance ratioVisual AlarmMax./min. values on displayStores 40000 readings, can be read off at any timeReplaceable batteryMeasuring mode: immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressedScope of supply: Temperature/Humidity logger, evaluation software, interface
Temperature/Humidity data logger LOG 210
PDF-data logger with displayMemory size: 100.000 measurementsUsable without software (default settings) (5-minute-interval, without alarm settings)Automatic PDF creationMovement sensor for shock recording e.g.: door or windows closingFree adjustable recording interval: 10 seconds to 24 hoursMax-Min-Display memory (resettable)Time marking functions for measuring resultsBattery lifetime approx. 4 years (recording interval >15 minutes)Status- and Alarm-LEDsIncludes wall mountBattery: 1/2 AA, 3.6 VFree software LogConnect, for configuring (alarms, interval, changing display settings) or LogGraph2 for comfortable graphical and tabular display of measured values, incl. drag and zoom. Software is available as download.
Temperature/Humidity data logger LOG110
Large display for actual value, battery status display, easy to use software.Perfect designed instrument for transportation or storage after HACCP.Quality surveillance in laboratories, at the production or in the storageAmbient conditions in manufacturing facilitiesAmbient conditions in power plantsMonitoring of fridges for the pharma industryMemory for 60000 data setsPlease order Software with USB-Cabel separately (9.726 413).
Temperature/humidity data logger testo 184 H1
The Temperature/humidity data logger testo 184 H1 monitors every step of the cold chain during the transport of sensitive goods. Direct control of whether the configured limit values have been adhered to at the destination. The measurement results can be read out when connected to a PC via the automatic PDF report. Easy operation due to the stored files for configuration, acceptance test certificate and operating instructions.Clear alarm indicationEasy configuration without software installationConvenient readout due to automatic PDF reportMemory: 60000 measured valuesConformity to GxP, 21 CFR Part 11, HACCP and EN 12830
Temperature/Humidity/Pressure data logger LOG 220
PDF-data logger with displayMemory size: 60000 measurementsUsable without software (default settings) (5-minute-interval, without alarm settings)Automatic PDF creationFree adjustable recording interval (10 seconds to 24 hours)Max-Min-Display memory (resettable)Time marking functions for measuring resultsMovement sensor for shock recording e.g.: door or windows closingBattery lifetime approx. 4 years (recording interval >15 minutes)Includes wall mountStatus- and Alarm-LEDsBattery: 1/2 AA, 3.6 VFree software LogConnect, for configuring (alarms, interval, changing display settings) or LogGraph2 for comfortable graphical and tabular display of measured values, incl. drag and zoom. Software is available as download.
Temperature/humidity/shock data logger testo 184 G1
The multiparameter data logger testo 184 G1 is specially designed for monitoring shocks, relative humidity and temperature during the transport of sensitive goods. Direct control of whether the configured limit values have been adhered to at the destination. The measurement results can be read out when connected to a PC via the automatic PDF report. Easy operation due to the stored files for configuration, acceptance test certificate and operating instructions.Clear alarm indicationEasy configuration without software installationConvenient readout due to automatic PDF reportMemory: 64000 measurement values (temperature and humidity), 1000 measurement values (shock)Conformity to GxP, 21 CFR Part 11, HACCP and EN 12830
Temperature/pressure data logger EBI 12-TP231
Temperature/pressure data logger for process validation in the washer-disinfector, endoscope washer, and steam sterilizer.Data logger can be sterilised1 axially arranged external, rigid PT1000 temperature sensor1 internal piezoresistive pressure sensor with Luer-Lock connectionReal-time data transmissionFast response timeStorage modes: Endless measurement, measurement upon start time, measure immediately until end of memory, start/stop measurementMemory for up to 33440 measured values per measurement channelStainless steel housingFactory calibration certificate: 0 °C, 60 °C, and 134 °C; 100 mbar and 3100 mbar at 25 °C, 3100 mbar at 134 °C
Temperature/pressure data logger EBI 12-TP237
Robust, sterilizable temperature/pressure data logger for process validation and routine or batch control in the washer-disinfector and steam sterilizer.Hose connection and M10x1 internal threadWireless measurementReal-time data transmissionPT1000 temperature probe and piezoresistive pressure sensorTemperature probe (Ø 1.95 mm) rigid, axialNeedle length 20 mmMemory for up to 2 x 33440 measured valuesFactory calibration certificate: 0 °C, 60 °C, and 134 °C / 100 mbar, and 3100 mbar at 25 °C, 3100 mbar at 134 °CScope of supply: Temperature/pressure data logger
WiFi data logger testo 160 IAQ
The WiFi data logger is ideal for monitoring indoor air. In mains operation, coloured LEDs indicate the air quality according to the traffic light principle.Monitoring of temperature, humidity, atmospheric pressure and CO2CO2 limit values can be individually set in the testo CloudMeasurement value transfer via WLAN to the cloud storage: data can be retrieved at any time on PC or mobile devicesE-mail notification when limit values are exceededCompact designLCD displayUSB interfaceMemory: 32000 measuring valuesScope of supply: WiFi data logger testo 160 IAQ, USB mains unit, 4 x AA Batteries, Wall bracket, QR code sticker, Calibration protocol, Short instructions, free Cloud access (Basic functionality)
WiFi Temperature-humidity logger testo Saveris 2-H1
The WiFi data logger is ideal for monitoring temperature and relative humidity in rooms. Measurement data is sent to the testo Cloud (online data storage) via wireless LAN and can be accessed and evaluated on all internet-enabled end devices. The testo Cloud Basic package can be accessed free of charge.Internal data memory up to 10000 measured values per channelLimit values adjustable via testo-CloudE-mail notification when limit values are exceededCurrent measured values can be read on the displayMicro USB interfaceWith internal temperature and humidity probeMemory: 10000 measured values per channelScope of supply: WiFi Temperature-humidity logger, testo-Cloud access (basic functionality), micro USB cable, wall bracket, batteries, calibration protocol