pH / ion meter SevenDirect™ SD50-Kit
Meter kits are suitable for measuring the pH value and ion concentration of samples and can be used in a wide range of laboratory areas.pH / ion meter SD50 with large 7" touch screen and 5 point calibrationpH electrode InLab® Expert Pro-ISM with robust PEEK shaft, integrated NTC 30 kΩ temperature sensor and ARGENTAL™ reference system. The electrode is always ready for use as the solid XEROLYT® reference electrolyte does not need to be refilledScope of supply: pH / ion meter SevenDirect™ SD50, electrode arm EasyPlace™, pH electrode InLab® Expert Pro-ISM, 3 x 2 calibration buffer sachets pH 4.01, 7.00 and 9.21 or 10.01, protective cover, power supply, get-started-guide
pH/conductivity meter NineFocus NF2300 Kit
High-performance, modular benchtop meter for determining pH and conductivity. Sensor diagnostics with user guidance reduce downtime and monitors sensor condition. Automatic data transfer to LabX software supports full compliance with important industry regulatory standards such as CFR 21 Part 11 and ALCOA++. Up to three additional digital measurement modules can be added to increase productivity.Detachable terminal with 7" touchscreenIntuitive One Click™ user interface in 14 languagesFlexible user management: user groups can be tailored to any need and settings can be protected against unwanted changesInterfaces: 3 x USB-A, USB-C, EthernetMemory for 3000 result setsSplash-proof and dust-proof (IP52)Compatibility with analogue sensors (e.g. ISM) using analogue measurement modules (sold separately)With the appropriate sensors, the device can also measure redox potential, ion concentration, and dissolved oxygen (please order sensors separately). The measuring ranges therefore depend on the sensor used.Scope of supply: Meter with built-in digital measuring module, terminal, 1 additional digital measuring module, electrode arm EasyPlace, pH electrode InLab® Expert Pro-DES, conductivity electrode InLab® 731 Pro-DES, signal bridge, sensor cable, standards
pH/conductivity meter NineFocus NF2300 Pure H2O Kit
High-performance, modular benchtop meter for determining pH and conductivity. Sensor diagnostics with user guidance reduce downtime and monitors sensor condition. Automatic data transfer to LabX software supports full compliance with important industry regulatory standards such as CFR 21 Part 11 and ALCOA++. Up to three additional digital measurement modules can be added to increase productivity.Detachable terminal with 7" touchscreenIntuitive One Click™ user interface in 14 languagesFlexible user management: user groups can be tailored to any need and settings can be protected against unwanted changesInterfaces: 3 x USB-A, USB-C, EthernetMemory for 3000 result setsSplash-proof and dust-proof (IP52)Compatibility with analogue sensors (e.g. ISM) using analogue measurement modules (sold separately)With the appropriate sensors, the device can also measure redox potential, ion concentration, and dissolved oxygen (please order sensors separately). The measuring ranges therefore depend on the sensor used.Scope of supply: Meter with built-in digital measuring module, terminal, 1 additional digital measuring module, electrode arm EasyPlace, pH electrode InLab® Pure Pro-DES, conductivity electrode InLab® 741 Pro-DES, signal bridge, sensor cable, standards
pH/conductivity/oxygen meter NineFocus NF2340 Kit
High-performance, modular benchtop meter for determining pH, conductivity, and dissolved oxygen. Sensor diagnostics with user guidance reduce downtime and monitors sensor condition. Automatic data transfer to LabX software supports full compliance with important industry regulatory standards such as CFR 21 Part 11 and ALCOA++. Up to three additional digital measurement modules can be added to increase productivity.Detachable terminal with 7" touchscreenIntuitive One Click™ user interface in 14 languagesFlexible user management: user groups can be tailored to any need and settings can be protected against unwanted changesInterfaces: 3 x USB-A, USB-C, EthernetMemory for 3000 result setsSplash-proof and dust-proof (IP52)Compatibility with analogue sensors (e.g. ISM) using analogue measurement modules (sold separately)Concentration dissolved oxygen: 0 to 50 mg/l (ppm)Accuracy dissolved oxygen: ±0.1 mg/l (0 to 8 mg/l), ±0.2 mg/l (8 to 20 mg/l), ±10 % (20 to 50 mg/l)With the appropriate sensors, the device can also measure redox potential and ion concentration (please order sensors separately). The measuring ranges therefore depend on the sensor used.Scope of supply: Meter with built-in digital measuring module, terminal, 2 additional digital measuring modules, electrode arm EasyPlace, pH electrode InLab® Expert Pro-DES, conductivity electrode InLab® 731 Pro-DES, oxygen electrode InLab® OptiOx Pro-DES, signal bridge, sensor cable, standards
pH/ion and conductivity meter Orion™ Pro Star PC215
Meter with two channels for accurate and reliable analysis of pH, ORP and ion concentration via channel 1, as well as conductivity, TDS, salinity and resistivity via channel 2. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesBoth measuring channels can be viewed individually or simultaneouslySelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration, conductivity, TDS)1- to 2-point calibration (temperature)1-point calibration (ORP, salinity)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion and conductivity meter, electrode stand, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/ion and conductivity meter Orion™ Pro Star PC215, pure water kit
Meter with two channels for accurate and reliable analysis of pH, ORP and ion concentration via channel 1, as well as conductivity, TDS, salinity and resistivity via channel 2. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesBoth measuring channels can be viewed individually or simultaneouslySelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration, conductivity, TDS)1- to 2-point calibration (temperature)1-point calibration (ORP, salinity)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion and conductivity meter, electrode stand, refillable pH/ATC electrode with epoxy shaft (8157BNUMD), conductivity/ATC electrode with flow cell (013016MD), pH buffers 4, 7, 10 and rinse solution (pouches), storage and cleaning solution for pH electrode, pH electrode storage sleeve and base, conductivity standard 100 µS/cm (bottles), USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/ion and conductivity meter Orion™ Pro Star PC215, standard kit
Meter with two channels for accurate and reliable analysis of pH, ORP and ion concentration via channel 1, as well as conductivity, TDS, salinity and resistivity via channel 2. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesBoth measuring channels can be viewed individually or simultaneouslySelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration, conductivity, TDS)1- to 2-point calibration (temperature)1-point calibration (ORP, salinity)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion and conductivity meter, electrode stand, refillable pH/ATC electrode with epoxy shaft (8157BNUMD), conductivity/ATC electrode (013005MD), pH buffers 4, 7, 10 and rinse solution (pouches), storage and cleaning solution for pH electrode, pH electrode storage sleeve and base, conductivity standard 1413 µS/cm (pouches), USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/ion and oxygen meter Orion™ Pro Star PD216
Meter with two channels for accurate and reliable analysis of pH, ORP and ion concentration via channel 1, as well as dissolved oxygen and barometric pressure via channel 2. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesBoth measuring channels can be viewed individually or simultaneouslySelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration)1- to 2-point calibration (oxygen saturation, temperature)1-point calibration (ORP, oxygen concentration, barometric pressure)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion and oxygen meter, electrode stand, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/ion and oxygen meter Orion™ Pro Star PD216, standard pH/BOD kit
Meter with two channels for accurate and reliable analysis of pH, ORP and ion concentration via channel 1, as well as dissolved oxygen and barometric pressure via channel 2. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesBoth measuring channels can be viewed individually or simultaneouslySelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration)1- to 2-point calibration (oxygen saturation, temperature)1-point calibration (ORP, oxygen concentration, barometric pressure)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion and oxygen meter, electrode stand, refillable pH/ATC electrode with epoxy shaft (8157BNUMD), AUTO-STIR polarographic BOD DO/ATC electrode with calibration sleeve (086030MD), pH buffers 4, 7, 10 and rinse solution (pouches), storage and cleaning solution for pH electrode, pH electrode storage sleeve and base, polarographic DO electrode maintenance kit, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/ion and oxygen meter Orion™ Pro Star PD216, standard pH/DO kit
Meter with two channels for accurate and reliable analysis of pH, ORP and ion concentration via channel 1, as well as dissolved oxygen and barometric pressure via channel 2. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesBoth measuring channels can be viewed individually or simultaneouslySelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration)1- to 2-point calibration (oxygen saturation, temperature)1-point calibration (ORP, oxygen concentration, barometric pressure)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion and oxygen meter, electrode stand, refillable pH/ATC electrode with epoxy shaft (8157BNUMD), polarographic DO/ATC electrode with calibration sleeve (083005MD), pH buffers 4, 7, 10 and rinse solution (pouches), storage and cleaning solution for pH electrode, pH electrode storage sleeve and base, polarographic DO electrode maintenance kit, BOD adapter, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/ion and oxygen meter Orion™ Pro Star PD216, standard pH/optical DO kit
Meter with two channels for accurate and reliable analysis of pH, ORP and ion concentration via channel 1, as well as dissolved oxygen and barometric pressure via channel 2. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesBoth measuring channels can be viewed individually or simultaneouslySelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration)1- to 2-point calibration (oxygen saturation, temperature)1-point calibration (ORP, oxygen concentration, barometric pressure)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion and oxygen meter, electrode stand, refillable pH/ATC electrode with epoxy shaft (8157BNUMD), optical DO/ATC electrode with calibration sleeve, guard and optical cap (087010MD), pH buffers 4, 7, 10 and rinse solution (pouches), storage and cleaning solution for pH electrode, pH electrode storage sleeve and base, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/Ion meter NineFocus NF5000 AMM Base
High-performance, modular benchtop meter for determining pH and ion concentration. Sensor diagnostics with user guidance reduce downtime and monitors sensor condition. Automatic data transfer to LabX software supports full compliance with important industry regulatory standards such as CFR 21 Part 11 and ALCOA++. Up to three additional digital measurement modules can be added to increase productivity.Detachable terminal with 7" touchscreenIntuitive One Click™ user interface in 14 languagesFlexible user management: user groups can be tailored to any need and settings can be protected against unwanted changesInterfaces: 3 x USB-A, USB-C, EthernetMemory for 3000 result setsSplash-proof and dust-proof (IP52)Compatibility with analogue sensors (e.g. ISM) using analogue measurement modules (sold separately)With the appropriate sensors, the device can measure conductivity, pH, redox potential, ion concentration, and dissolved oxygen (please order sensors separately). The measuring ranges therefore depend on the sensor used.Scope of supply: Meter with built-in digital measuring module, terminal, analogue measuring module pH/Redox/Ion, electrode arm EasyPlace
pH/ion meter Orion™ Pro Star PI214
Meter for accurate and reliable analysis of pH, ORP, ion concentration and temperature. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesSelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration)1- to 2-point temperature calibration1-point ORP calibrationUp to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion meter, electrode stand, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/ion meter Orion™ Pro Star PI214, ammonia kit
Meter for accurate and reliable analysis of pH, ORP, ion concentration and temperature. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesSelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration)1- to 2-point temperature calibration1-point ORP calibrationUp to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion meter, electrode stand, ion selective ammonia electrode (9512HPBNWP), ATC temperature probe (927007MD), stirrer probe (096019-WA), ammonia standard 1000 ppm, ammonia ISA, storage solution, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/ion meter Orion™ Pro Star PI214, fluoride kit
Meter for accurate and reliable analysis of pH, ORP, ion concentration and temperature. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesSelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration)1- to 2-point temperature calibration1-point ORP calibrationUp to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion meter, electrode stand, ion selective fluoride electrode (9609BNWP), ATC temperature probe (927007MD), stirrer probe (096019-WA), fluoride standard 100 ppm, fluoride standard 0.5, 1 and 5 ppm premixed with TISAB II, TISAB II solution, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/ion meter Orion™ Pro Star PI214, pH kit
Meter for accurate and reliable analysis of pH, ORP, ion concentration and temperature. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesSelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration)1- to 2-point temperature calibration1-point ORP calibrationUp to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion meter, electrode stand, refillable pH/ATC electrode with epoxy shaft (8157BNUMD), stirrer probe (096019-WA), pH buffers 4, 7, 10 and rinse solution (pouches), storage and cleaning solution, pH electrode storage sleeve and base, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/ion meter Orion™ Pro Star PI214, sodium kit
Meter for accurate and reliable analysis of pH, ORP, ion concentration and temperature. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesSelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration)1- to 2-point temperature calibration1-point ORP calibrationUp to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion meter, electrode stand, ion selective sodium electrode (8611BNWP), ATC temperature probe (927007MD), stirrer probe (096019-WA), sodium standard 1000 ppm, sodium ISA, conditioning and storage solution, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/ion, conductivity and oxygen meter Orion™ Pro Star MP218
Meter with three channels for accurate and reliable analysis of pH, ORP and ion concentration via channel 1, as well as conductivity, TDS, salinity and resistivity via channel 2, and dissolved oxygen and barometric pressure via channel 3. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesMeasuring channels can be viewed individually or up to 3 channels simultaneouslySelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration, conductivity, TDS)1- to 2-point calibration (oxygen saturation, temperature)1-point calibration (ORP, salinity, oxygen concentration, barometric pressure)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion, conductivity and oxygen meter, electrode stand, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/ion, conductivity and oxygen meter Orion™ Pro Star MP218, pH/conductivity kit
Meter with three channels for accurate and reliable analysis of pH, ORP and ion concentration via channel 1, as well as conductivity, TDS, salinity and resistivity via channel 2, and dissolved oxygen and barometric pressure via channel 3. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesMeasuring channels can be viewed individually or up to 3 channels simultaneouslySelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration, conductivity, TDS)1- to 2-point calibration (oxygen saturation, temperature)1-point calibration (ORP, salinity, oxygen concentration, barometric pressure)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion, conductivity and oxygen meter, electrode stand, refillable pH/ATC electrode with epoxy shaft (8157BNUMD), conductivity/ATC electrode (013005MD), stirrer probe (096019-WA), pH buffers 4, 7, 10 and rinse solution (pouches), storage and cleaning solution for pH electrode, pH electrode storage sleeve and base, conductivity standard 1413 µS/cm (pouches), USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/ion, conductivity and oxygen meter Orion™ Pro Star MP218, pH/conductivity/DO kit
Meter with three channels for accurate and reliable analysis of pH, ORP and ion concentration via channel 1, as well as conductivity, TDS, salinity and resistivity via channel 2, and dissolved oxygen and barometric pressure via channel 3. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesMeasuring channels can be viewed individually or up to 3 channels simultaneouslySelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration, conductivity, TDS)1- to 2-point calibration (oxygen saturation, temperature)1-point calibration (ORP, salinity, oxygen concentration, barometric pressure)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion, conductivity and oxygen meter, electrode stand, refillable pH/ATC electrode with epoxy shaft (8157BNUMD), conductivity/ATC electrode (013005MD), polarographic DO/ATC electrode with calibration sleeve (083005MD), stirrer probe (096019-WA), pH buffers 4, 7, 10 and rinse solution (pouches), storage and cleaning solution for pH electrode, pH electrode storage sleeve and base, conductivity standard 1413 µS/cm (pouches), polarographic DO electrode maintenance kit, BOD adapter, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
pH/ion, conductivity and oxygen meter Orion™ Pro Star MP218, pH/conductivity/optical DO kit
Meter with three channels for accurate and reliable analysis of pH, ORP and ion concentration via channel 1, as well as conductivity, TDS, salinity and resistivity via channel 2, and dissolved oxygen and barometric pressure via channel 3. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections, electrode stand assembly and pH electrode usage. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesMeasuring channels can be viewed individually or up to 3 channels simultaneouslySelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (pH, ion concentration, conductivity, TDS)1- to 2-point calibration (oxygen saturation, temperature)1-point calibration (ORP, salinity, oxygen concentration, barometric pressure)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: pH/ion, conductivity and oxygen meter, electrode stand, refillable pH/ATC electrode with epoxy shaft (8157BNUMD), conductivity/ATC electrode (013005MD), optical DO/ATC electrode with calibration sleeve, guard and optical cap (087010MD), stirrer probe (096019-WA), pH buffers 4, 7, 10 and rinse solution (pouches), storage and cleaning solution for pH electrode, pH electrode storage sleeve and base, conductivity standard 1413 µS/cm (pouches), USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
Protection cover for multi-parameter measuring device Liquiline Mobile CML18
The protection cover protects the Liquiline Mobile CML18 from damage, e.g. by falling down.
Replacement electrode for multi-parameter tester Pocket Tester SD40 Multi
Multi-replacement electrode with gel electrolyte, a highly sensitive glass membrane, and two robust graphite electrodes for the Pocket Tester SD40 Multi.Precise determination of pH, conductivity, TDS, and saltSimple electrode replacement mechanismBuilt-in NTC temperature sensorLow maintenance, robust, and inexpensive
Sensor protection
With the sensor protection, connected sensors are protected against impacts during field measurements as well as during temporary installations. In addition, a stable Memosens connection is ensured.
USB charger for wireless module IDS WLM-S
Cascadable USB charging station without power supply unit for the IDS WLM-S sensor modules. For charging with or without connected electrode.Please order power supply unit separately.
USB data and charging cable for multi-parameter measuring device Liquiline Mobile CML18
The cable can be used to transfer measurement data from the Liquiline Mobile CML18 to a computer and to recharge the multi-parameter measuring device.
Wireless module IDS WLM-S
Wireless measurement of pH/Redox, conductivity, dissolved oxygen and turbidity.Bluetooth® LEUniversal plug headOpening for electrolyte solution refilling (only pH electrodes with liquid electrolyte)Signal LED (RGB)Range 10 mIP code IP 66Power supply: Re-chargeable LiPo battery 230 mAhSuitable for IDS portable meters MultiLine® Multi 3630 IDS/3620 IDS/3510 IDS, as well as for IDS laboratory meters inoLab® Multi 9630 IDS/9620 IDS/9310 IDS.
Wireless module kit IDS WLM KIT
Wireless measurement of pH/Redox, conductivity, dissolved oxygen and turbidity.Bluetooth® LEUniversal plug headOpening for electrolyte solution refilling (only pH electrodes with liquid electrolyte)Signal LED (RGB)Range 10 mSuitable for IDS portable meters MultiLine® Multi 3630 IDS/3620 IDS/3510 IDS, as well as for IDS laboratory meters inoLab® Multi 9630 IDS/9620 IDS/9310 IDS.Scope of supply: Wireless module for plug-in head sensor (IDS WLM-S), wireless module for IDS device (IDS WLM-M), USB charger for wireless modules (WLM-Charger), universal USB power supply unit (NT USB Universal)