Conductivity Pocket Tester Elite CTS Pin Kit
The Elite CTS pocket tester simultaneously displays conductivity/TDS/salinity with temperature. Available with Pin sensor. With leakproof, transparent wide-base cap for upright standing with fill line indicator.1-push calibrationLarge 4-digit double line displayBacklit graphic displayAuto-hold readingsEasy-to-operate, intuitive keypadAuto-offScope of supply: Tester incl. batteries, lanyard, soft carry case, CTS conductivity standard sachets (5 x 1413 µS/cm KCl and 5 x 2764 µS/cm KCl)
Conductivity sensor CLL47E
Four-electrode sensor made of stainless steel with a wide measuring range and Memosens technology for laboratory and random sample measurement in the field. Ideal for measurements where a broad conductivity measurement range in one system is needed. Memosens technology is based on true Plug & Play for minimised downtime. Measured values, calibration data, and history are stored directly in the sensor. Memosens offers absolutely secure data transmission and thus ensures increased availability of the measuring point and trouble-free processes. In addition, the inductive Memosens coupling is insensitive to moisture and corrosion.Solid platinum electrodes provide easy maintenance and long lifetimeIntegrated Pt1000 temperature sensor for automatic temperature compensationPrecise adjustment and reliable measurement with a quality cerificate indicating the individual cell constantEasy to clean thanks to seamless designSupports quality management requirements with tamper-proof data storage including serial number and calibration historyThe sensor is supplied pre-calibrated and ready for immediate use.
Conductivity sensor SE 202
Laboratory conductivity sensor with 2 electrodes, electrode and body material 1.4571 stainless steel, connector head POM, incl. flow through beaker.
Conductivity sensor SE 204
Laboratory conductivity sensor with 4 electrodes, graphite electrode material, epoxy body material.
Conductivity standards
For calibration of conductivity meters and electrodes. NIST traceable. Accuracy ±0.5% at 25 °C.
Conductivity standards with certification
Traceable to NISTCertificate including actual value and expiration dateActual value and expiration date on bottleIncludes temperature table for accurate calibrationCalibration certificate from DFM, Type 706 µS/cm and 100 mS/cm calibration certificate from Hamilton
Conductivity standards, ISO 17025
Conductivity standards tested and ISO 17025 certified at 25 °C. Uncertainty of measurement of ± 1%. Directly traceable to N.I.S.T. Temperature dependence data is printed on the label as are lot numbers and expiry dates. Supplied in 500 ml HDPE bottle. 1.3 µS/cm in 250 ml bottle. Calibration values 84, 147, 1413, 12880 µS/cm. Control Values 1.3 - 350000 µS/cm.*1.25 - 1.35 µS/cm at 25 °C.
Conductivity standards, ISO 17034
Aqueous-based conductivity standards for calibration of conductivity sensors, quality control, method validation and instrument qualification.Tested and ISO 17034 certified at 25 °CTraceability according to N.I.S.T.High accuracy of ± 1 % at 25 °CSupplied in 500 ml HDPE bottles
Conductivity tester Eutech™ ECTestr 11
Waterproof and rugged conductivity meter with manual or automatic ranging options. Suitable for water and wastewater treatment, e.g. drinking water treatment, aquariums and fish farms, swimming pools and agriculture.User-replaceable SS316 stainless steel sensor elementECTestr® 11 with pin electrodeWith 2 measuring rangesWith 2 calibration pointsAutomatic or manual ranging capabilitiesWith temperature displayCalibration settings remain, even when you run out of batteriesWaterproof and dustproof housingLarge LCD display
Conductivity tester Eutech™ ECTestr 11+
Waterproof and rugged conductivity meter with manual or automatic ranging options. Suitable for water and wastewater treatment, e.g. drinking water treatment, aquariums and fish farms, swimming pools and agriculture.User-replaceable SS316 stainless steel sensor elementECTestr® 11+ with cup electrodeUp to 3 measuring rangesUp to 3 calibration points with auto/manual optionAutomatic or manual ranging capabilitiesWith temperature displayCalibration settings remain, even when you run out of batteriesWaterproof and dustproof housingLarge LCD display
Conductivity tester Expert CTS
For accurate measurement of conductivity, TDS, and salinity in one single instrument, making it an ideal solution for many applications.Large 4 digit double line displayDisplay of battery life, status and re-calibrationAutomatic temperature compensation (ATC)Auto conductivity buffer recognition and calibrationSelectable TDS factor: 0.40 to 1.00Auto off
Conductivity tester Pocket Tester SD30 EC
Pocket Tester with waterproof housing for measuring conductivity, TDS, salinity, and temperature. Ideal for regular checks in industrial plants or swimming pools. With lanyard and clip on the device head.Three-colour LED lighting system (blue, green, red) and display symbols for easy handling3 multifunction buttons with symbolsUp to 3 calibration pointsWith stability indicator, auto-hold, and auto-off functionTransparent lid for measurement, calibration, and storage of the electrodeOptimised lid design for an upright and stable position of the testerBattery operation (4 x AAA batteries)Easy battery and electrode replacement
Conductivity testing solutions
Values stated at 25°C. Supplied in containers as indicated. Accuracy ± 2%.* Supplied in vials!
Dot-matrix printer RS-P25
Dot-matrix printer with RS232 interface for documenting measurement data. The printer automatically recognises the settings of the connected device.Scope of supply: Printer, power cable (country specific), interface cable, paper roll (1 pc.), ribbon cartridge (1 pc.)
Dot-matrix printer RS-P26
Dot-matrix printer with build-in real-time clock and zero/tare key for documenting measurement data. RS232 interface.Scope of supply: Printer, power cable (country specific), interface cable, paper roll (1 pc.), ribbon cartridge (1 pc.)
Dot-matrix printer RS-P28
Dot-matrix printer with build-in real-time clock and zero/tare key for documenting measurement data.RS232 interfaceStatistics and totalling applicationScope of supply: Printer, power cable (country specific), interface cable, paper roll (1 pc.), ribbon cartridge (1 pc.)
Electrode arm EasyPlace™ for benchtop meters SevenDirect™
Complete electrode arm EasyPlace™ for mounting and precise positioning of electrodes.
IDS conductivity cell probe LR 925/01
For connection to WTW IDS measuring instruments.Intelligent digital 2-pole cell with integral temperature sensor and flowthrough cell D 01/T for measuring of low conductivity values (<1 µS/cm) e.g. in boiler feed water or ion exchange water. Automatical transfer of the cell constant. Min./max. immersion depth 35/110 mm.
IDS conductivity cell probes TetraCon® 925
For connection to WTW IDS measuring instruments.IDS conductivity cell probe TetraCon® 925 (/P):Intelligent digital 4-pole cell with integral temperature sensor. Automatical transfer of the cell constant. Sensor head made of POM.IDS conductivity cell probe TetraCon® 925/C:Intelligent digital 4-pole cell with integral temperature sensor. Automatical transfer of the cell constant. Sensor head made of PEEK.IDS conductivity cell probe TetraCon® 925/LV (/P):Intelligent digital 4-pole cell with integral temperature sensor. Fork design, suitable for small volumes (at least 2.5 ml) as well as for viscous samples. Automatical transfer of the cell constant.
Immersion stirrer ZU 6955 for pH meter 765/766 and conductivity meter 703
The immersion stirrer reduces electrode response time for measurement and calibration. Stainless steel impeller Ø 12 mm. Dimensions Ø 25 x 250 mm. Immersion depth 90 mm.Please order power supply unit and attachable stand for fixing the immersion stirrer separately.
ISE Ionic Strength Adjustors (ISA) Orion™
Ionic strength adjustors are used for analysis with ion selective electrodes.
Laboratory Conductivity meter 703
Benchtop meter for electrolytic conductivity measurement in the laboratory. The unit can be operated with either 2-pole or 4-pole measuring cells. Temperature compensation is automatic with Pt 1000 / NTC 30 kOhm temperature sensors or manual.Large, bright LED displayRobust housing with stainless steel coverSensoface® monitors sensor and measuring equipmentDevice self-test Fullcheck® checks the functionality of the deviceAutomatic calibration with standard solutionsProtocols for QM documentation according to DIN ISO 9000 and GLPRS232 interface
Laboratory instrument inoLab® Cond 7110
Modern conductivity measurement is easy to do. The inoLab® Cond 7110 has all important functions for measuring conductivity like adjustable reference temperature and different methods of temperature compensation. A big LCD segment display makes readings easy and a well-arranged keypad provides convenient operation. The automatic AutoRead function supports correct and repeatable results.Scope of supply: Laboratory instrument, stand, short manual, CD-ROM, batteries, universal power supply
Laboratory instrument inoLab® Cond 7110 Set 1
Modern conductivity measurement is easy to do. The inoLab® Cond 7110 has all important functions for measuring conductivity like adjustable reference temperature and different methods of temperature compensation. A big LCD segment display makes readings easy and a well-arranged keypad provides convenient operation. The automatic AutoRead function supports correct and repeatable results.Scope of supply: Laboratory instrument, conductivity measuring cell TetraCon® 325, 0.01 mol/l KCl conductivity standard, stand, short manual, CD-ROM, batteries, universal power supply
LLG-Conductivity Solutions
Values stated at 25°C: Accuracy ±1%Directly traceable to NISTCertificate including actual value, expiration date and uncertainty of measurementThe safety data sheets of these products are available under www.llg-labware.com.
Orion™ calibration standards and TISAB solutions for ISE fluoride electrodes
Calibration standards ensure measurement accuracy. TISAB (Total Ionic Strength Adjustment Buffer) solutions are used to adjust the ionic strength for fluoride measurements.
ORION™ conductivity and TDS standards
For calibration of conductivity and TDS testers.All standards are NIST™ traceableWhen using the automatic calibration function on ORION™ software, the programmed temperature tables can be used
Orion™ DuraProbe™ conductivity cells with 4 electrodes
Robust and precise 4 electrode graphite cells with temperatue compensation. Errors based on fringe field interference are avoided. Epoxy body.013005MDFor use with conductivity meters Orion Star, Orion Star Plus013010MD and 013605MDFor use with conductivity meters Star A112, Star A122, Star A212, Star A215, Star A222, Star A322, Star A325, Star A329, Versa Star, Versa Star Pro
Portable conductivity meter ProfiLine Cond 3110
Easy to operate rugged conductivity meter for measurement of conductivity and salinity. The ProfiLine hand-held conductivity meters have a waterproof (IP 67) housing and a completely sealed silicone membrane keypad with tactile feedback. Simultaneous display of measurement value and temperature. Large LCD display for easy reading. Automatic nlF compensation for all grades of natural water.Scope of supply: Conductivity meter, short manual, CD-ROM, batteries
Portable conductivity meter ProfiLine Cond 3110 Set 1
Easy to operate rugged conductivity meter for measurement of conductivity and salinity. The ProfiLine hand-held conductivity meters have a waterproof (IP 67) housing and a completely sealed silicone membrane keypad with tactile feedback. Simultaneous display of measurement value and temperature. Large LCD display for easy reading. Automatic nlF compensation for all grades of natural water.Scope of supply: Conductivity meter, case, conductivity measuring cell TetraCon® 325, conductivity standard solution 1413 µS/cm at 25 °C, stand, beaker, short manual, CD-ROM, batteries
Printer ZU 0244 for pH meter 765 and conductivity meter 703
With the printer, measured values can be logged either at the touch of a button or timer-controlled. Protocol printouts for QM documentation according to ISO 9000 and GLP can also be made at the touch of a button.