Chiller Hei-Chill 1100 Pro
A cooling capacity of up to 1100 watt allows an effective and powerful cooling of every application, even at low temperatures, or the supply of multiple evaporation systems by a recirculation chiller. Maximum performance for achieving the set target values quickly and for keeping high temperature stability even when using high-polar solvents or during continuous evaporation processes, e.g. in combination with the automatic Hei-VOLUME Distimatic Pro moduleWith natural refrigerant (R-290)Efficient cooling system with low-energy fansTouchscreen controller with glass surface and integrated level indicatorLow noise level due to speed-controlled fansRS-232 interfaceControlled e.g. via Hei-VAP Expert Control, Ultimate Control or via Heidolph laboratory software process solutions
Chiller Hei-Chill 400 Pro
Space-saving device with 400 watts of cooling power for a variety of evaporation tasks in the laboratory. Its low weight makes it particularly suitable for flexible positioning on the laboratory bench or in a fume hood. It can also be easily positioned underneath the laboratory bench due to its increased pump capacity.With natural refrigerant (R-290)Consumption-optimised controlLow noise levelRS-232 interfaceControlled e.g. via Hei-VAP Expert Control, Ultimate Control or via Heidolph laboratory software process solutions
Chiller Hei-Chill 700 Pro
Powerful 700 watt cooling for every evaporation process and large volumes. High performance for achieving the target temperature quickly and for keeping high temperature stability even when using high-polar solvents.With natural refrigerant (R-290)Efficient cooling system with low-energy fansTouchscreen controller with glass surface and integrated level indicatorLow noise level due to speed-controlled fansRS-232 interfaceControlled e.g. via Hei-VAP Expert Control, Ultimate Control or via Heidolph laboratory software solutions
Chiller Piccolo 280 OLÉ
Recirculating chiller operates/works with Peltier technology, i.e. free of refrigerants and therefore environmentally friendly and maintenance-free.Large, bright OLED displaySimple operation with menu navigationSimultaneous display of set point, internal temperature, Tmin and TmaxUSB and RS232 interfacesAutostart function for power failureScope of supply: Chiller Piccolo 280 OLÉ, connector with hose barbTemperature range:4 ... 70 °CTemperature stability:± 0.2 °CFlow rate:1.85 l/minPressure:0.95 barHeating power:0.7 kWCooling capacity (at 20 °C):0.28 kWDimensions (W x D x H):215 x 310 x 312 mmWeight:13 kgPower supply:100 ... 240 V, 50/60 HzIP code:IP 20
Chillers, Minichiller®
Small, robust and cost effective with its stainless steel casing. The Minichiller is the smallest Unichiller in the world. Minichillers are available with air or water-cooled refrigeration systems, illuminated level indicator, overflow and drain on the front. The filling port is on the top of the unit. All models use natural refrigerants as standard. Minichillers have suction and pressure pumps and therefore have the advantage of have a high flow at low pressure. This is particularly interesting for all pressure sensitive applications (e.g. glass condensors).* Permissible temperature in return line 80 °C
Chrome steel Dewar flasks
Nickel chromium steel, unbreakable, open top. With high-vacuum, permanent insulation. Temperature range -269 to 300 °C. 5 year insulation guarantee.
Circulation Heat Exchanger HTS
Heat exchanger systems with circulation pump for connection to cooling water on the primary side. The devices provide a cooling circuit with stable pressure/ ow and adjustable operating temperature. The cooling capacity is generated using a plate heat exchanger via the cooling water. Since there is no active cooling machine, the devices operate in a quiet and energy-saving manner and are a cost-effective alternative to conventional chillers e.g. for the temperature control of Peltier elements, bioreactors, etc.The model HTS 1 contains the heat exchanger system, however it does not have any temperature control. The device is therefore suited for applications with low requirements for control accuracy.Effcient circulation pumpTemperature stability ±0.1 KRS232 interfacePt100 external sensor connectionLow cooling water usageApplication protection with cooling stage separation
Circulation thermostat PT31
The PT31 circulation thermostat is equipped with high performance functions. The device is ideally suited for applications requiring a temperature range at a constant level. The robust locking mechanism of the PT31 provides a sturdy connection and ensures constant temperature control of the medium.Temperature control using Peltier technologySpace-saving, sturdy designSuitable for operation with non-flammable liquids (water or water/glycol mixture)
Circulator bath HRC 2 lite
Compact peripheral device designed for simple tempering tasks from -10 to 100 °C. Especially suitable for tempering bioreactors and laboratory reactors, open bath solutions or as a tempering source for measuring devices.The pressure and suction pump enables the operation of several small applications as well as external applications in open baths in combination with a level controller.Natural refrigerant R290Easy-to-clean stainless steel mesh filterInterfaces: RS 232, USBOptional control and monitoring via labworldsoft® and other laboratory softwareScope of supply: Circulator bath, 2 x olive for DN 8 hoses, USB A-B cable
Circulator bath RC 2 lite
Powerful recirculating chiller for external cooling tasks down to -10 °C. The RC 2 lite is suitable for cooling external equipment such as laboratory reactors, calorimeters, incubation shakers or rotary evaporators. The pressure and suction pump enables the operation of several small applications as well as external applications in open baths in combination with a level controller.Natural refrigerant R290Easy-to-clean stainless steel mesh filterInterfaces: RS 232, USBScope of supply: Circulator bath, 2 x olive for DN 8 hoses
Circulator baths CORIO™ CP
With insulated stainless steel bath tanks, flexible performance and an operating temperature range of up to 200 °C. Temperature control is possible either in the internal bath or in a connected external application.Suitable for internal and external applicationsHigh-quality stainless steel bath vessels with bath lid and drainIntegrated pump connections M16 x 1Integrated cooling coil for counter-coolingBright, white, easily visible display, even from a distanceLow-level warning systemEasy switching between internal and external circulationPowerful, continuously variable pumpPump capacity adjustable from 8 to 27 l/minVery quietRubber feet for secure standingUSB connectionRS232 interface3-point calibrationClass III (FL) according to DIN 12876-1Scope of supply: Circulator bath, mains power cable, connection box, bath, bath cover, hose connectors 8 and 12 mm
Circulator baths RC 2 basic
The RC recirculating chillers are designed to cool external equipment quickly and efficiently. The chillers offer short cooling times at a temperature stability of ±0.1 K and a working temperature range of -20 °C to room temperature. The RC 2 recirculating chillers are ideal for cooling external equipment such as laboratory reactors, calorimeters, incubating shakers or rotary evaporators.
Circulator baths RC 2 control
The RC recirculating chillers are designed to cool external equipment quickly and efficiently. They are ideal for cooling external equipment such as laboratory reactors, calorimeters, incubating shakers or rotary evaporators. The RC 2 control with wireless controller (WiCo) makes the device easy to operate remotely, enabling users to save space through the option of placing the chiller in a hard-to-reach area of the laboratory. Critical temperature control processes can be monitored and recorded, guaranteeing complete documentation of all measurement processes. With connection for external PT100 sensor (included in delivery).
Circulator baths RC 5 basic
Powerful recirculating chiller, designed for external cooling applications up to -30 °C. The energy-efficient chiller is operated with an eco-friendly refrigerant and reaches a high power density. This results in a comparatively small working space in the lab. Due to the excellent temperature stability they can handle even sophisticated applications. The isolated, high-quality bath has an integrated hopper and drain valve, ensuring safe and clean handling of the thermofluid.Speed-controlled refrigeration system (PEEK)Speed-controlled pump (PEEK)Natural thermofluid R290Extended operating temperature range until 80°CDigital level indicatorInterfaces: RS 232 and USB
Circulator baths RC 5 control
Powerful recirculating chiller, designed for external cooling applications up to -30 °C. The energy-efficient chiller is operated with an eco-friendly refrigerant and reaches a high power density. This results in a comparatively small working space in the lab. Due to the excellent temperature stability they can handle even sophisticated applications. The isolated, high-quality bath has an integrated hopper and drain valve, ensuring safe and clean handling of the thermofluid.Speed-controlled refrigeration system (PEEK)Speed-controlled pump (PEEK)Natural thermofluid R290Extended operating temperature range until 80°CDigital level indicatorInterfaces: RS 232 and USBRemote control via Wireless Controller (WiCo)Simplified and automated processes through 10 freely programmable temperature ramps with 10 steps eachTimer/CounterDegassing functionConnection of magnetic valves possible (Mulit IO)Alarm contact (Multi IO)Connector for standby contact input (Multi IO)Connection for external PT100 temperature sensor (included in delivery)
Circulator Baths, CORIO™ CD
CORIO™ CD Heating Circulators for internal and external temperature applications with stainless steel baths for working temperatures from 20 °C to 150 °C. CORIO™ Heating Circulators feature professional technology for demanding applications. These units facilitate internal temperature control in the bath tank or control of externally connected applications.For internal and external applicationsBright, white, easy to read displayVery quietPump change-over between internal and external circulationUSB connectionHigh-quality bath tanks made of stainless steel with bath lid and drain tapIntegrated cooling coil for counter-cooling
Clamp for Thermostatic controllers Optima™ T100 / TC120 / TX150 / TXF200
For attaching the thermostats to any vertical sided tank with a maximum wall thickness of 35 mm for rectangular tanks, 30 mm for circular tanks (300 mm diameter), and a capacity of up to 50 l.
Clamps for Erlenmeyer flasks for Shaking water baths Hydro
Clamps to be placed on the shaking tray.
Climate Chambers ICH C, with humidity and CO2 control
The climate chamber generation with the unique ControlCOCKPIT for a quick and intuitive operation. Unparalleled temperature and humidity homogeneity for long-term stable ambient conditions.PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel 1.4301 (ASTM 304), deep-drawnStructured stainless steel housing, rear of zinc-plated steelHigh-Operation and adjustment of all parameters directly at the ControlCOCKPIT temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamberAdjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT, for example relative humidityMoisture tight standard entry port, at the back, 40 mm inner diameter, can be closed by silicone stopperTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN/MAX values for over/undertemperature alarmThe climate chamber generation with the unique ControlCOCKPIT for a quick and intuitive operation. Unparalleled temperature and humidity homogeneity for long-term stable ambient conditions.PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel 1.4301 (ASTM 304), deep-drawnStructured stainless steel housing, rear of zinc-plated steelHigh-Operation and adjustment of all parameters directly at the ControlCOCKPIT temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamberAdjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT, for example relative humidityMoisture tight standard entry port, at the back, 40 mm inner diameter, can be closed by silicone stopperTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN/MAX values for over/undertemperature alarm
Climate Chambers ICH L, with humidity control and light
The climate chamber generation with the unique ControlCOCKPIT for a quick and intuitive operation. Unparalleled temperature and humidity homogeneity for long-term stable ambient conditions.PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel 1.4301 (ASTM 304), deep-drawnStructured stainless steel housing, rear of zinc-plated steelHigh-Operation and adjustment of all parameters directly at the ControlCOCKPIT temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamberAdjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT, for example relative humidityMoisture tight standard entry port, at the back, 40 mm inner diameter, can be closed by silicone stopperTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN/MAX values for over/undertemperature alarmSpecially designed for testing pharmaceutical products according to ICH, Q1A and Q1B, option 2, and similar global standards for stability tests of cosmetics and food.
Climate Chambers ICH, with humidity control
The climate chamber generation with the unique ControlCOCKPIT for a quick and intuitive operation. Unparalleled temperature and humidity homogeneity for long-term stable ambient conditions.PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel 1.4301 (ASTM 304), deep-drawnStructured stainless steel housing, rear of zinc-plated steelHigh-Operation and adjustment of all parameters directly at the ControlCOCKPIT temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamberAdjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT, for example relative humidityMoisture tight standard entry port, at the back, 40 mm inner diameter, can be closed by silicone stopperTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN/MAX values for over/undertemperature alarmThe climate chamber generation with the unique ControlCOCKPIT for a quick and intuitive operation. Unparalleled temperature and humidity homogeneity for long-term stable ambient conditions.PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel 1.4301 (ASTM 304), deep-drawnStructured stainless steel housing, rear of zinc-plated steelHigh-Operation and adjustment of all parameters directly at the ControlCOCKPIT temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamberAdjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT, for example relative humidityMoisture tight standard entry port, at the back, 40 mm inner diameter, can be closed by silicone stopperTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN/MAX values for over/undertemperature alarm
Climatic Test Chamber CTC256
Simulate the perfect atmosphere for climate and temperature tests, specifically in accordance with DIN EN 60068-2-1, 2-2 and 2-3. Provide unlimited flexibility for controlled material and function tests as well as ageing tests.Ventilation and Control: high-performance air fan in working chamberdepending on operation status automatically variable fan speed with manual adjustment from 10 % to 100 %adaptive, fuzzy-supported multifunctional digital microprocessor PID-controllerautodiagnostic system with fault indication on temperature and humidity control2 x Class A, 4-wire circuit, Pt100 sensors, mutually monitoring and maintaining performance at the same temperature valuedigital 7-day-programme-timer with real time clock, precise minute settingintegral timer for heating profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hoursdigital display (LED) of all set parameters, such as temperature, weekdays, time, humidity and set-up values - language to be chosen in setupdigital display of set values (resolution: 0.1 °C below 99.9 °C, 0.5 °C above 100 °C) and actual values (resolution: 0.1 °C) of temperature (LED)long-term documenting (ring store) of all relevant data, GLP-conforming as data logger - 1024 kBprogramme stored on power failureparallel printer interface (incl. real-time clock with date function) for all PCL3-compatible ink-jet printers for GLP-conforming documentationUSB interface including Memmert "Celsius" software for programming and documentationchip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)incl. works calibration certificate for -20 °C and 160 °CHeating concept: high-performance ring heaters with optimised air circulationdoor heating to avoid condensateCooling Concept:twin compressorspeed adjustable condenser fanrefrigerant R449AMultiple Overtemperature Protection:with audible and visual alarm in case of over-/undertemperature and over-/under-humidity, open door and empty water tankindependently working, digitally adjustable electronic overtemperature controller, TWW protection class 3.3additional adjustable Auto-Safety-Function "ASF" for over- and undertemperature automatically following the set value at a preset tolerance rangemechanical temperature limiter TB class 1 switching the heating off at approx.10 °C above max. oven temperatureStandards for CTC additionally:Electronically controlled active humidification and dehumidification from 10 % to 98 % rh with digital display of the relative humidity, display resolution 0.5 %, setting accuracy 1 %incl. works calibration certificate for 30 °C at 60 % rhHumidity supply with distilled water from 2 x 10 l tanks on integrated telescopic slide, with automatic water tank change-over2 x 10 l tanks acting as condensate collectors, on telescopic slide mounts