Safety temperature switch TEMPAT®-Control
Safety temperature switch for monitoring temperature-based routines of all kinds. Ideal for monitoring simple temperature controllers. The TEMPAT® Control device switches off when the limit temperature is obtained; a beep is heard. When the temperature drops below limit, the limit contact does not switch on automatically; it must be reset by the user.SpecificationsVoltage:220-235V ~ 50/60HzSwitching capacity:max. 1800VASwitching current:max. 8AMeasuring accuracy:±1%Dimensions:150 x 80 x 55mmWeight:0.65kg
Sample hydrolysis and digestion vessels
For the digestion of small sample volumes up to 0.5g in microwave ovens. Made of isostatically pressed, high-grade PTFE (TFM). The chemical resistance and usual PTFE properties remain unchanged. TFM is a modified PTFE by Hoechst and contains thermoplastic elements. This gives rise to a homogeneous, non-porous surface. Contaminating residues from earlier digestions are therefore avoided. Resists pressure deformation (to max. 25 bar) and temperature (max. 160 °C). An accessory burst-proof, sealing membrane prevents loss of volatile compounds and provides safety against overpressure. Optional digestion vessels with interchangeable inserts (internal liners) enable precise weighing-in (in most cases the complete vessels would be too heavy for balances). In addition, different digestion processes can be carried out in only one basic vessel by using several inserts.
Sand bath SD with performance control and connection cable
For continuous operation. Electrical sand bath with stepless power control. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50 mm. Stainless steel controller housing, with painted central section. Height-adjustable feet. Connection cable approximately 1.7 m with earthed plug.
Sand bath SD with performance control and permanent connection
For continuous operation. Electrical sand bath with stepless power control. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50 mm. Stainless steel controller housing, with painted central section. Height-adjustable feet.
Sand bath ST with performance control, thermostatic controller and connection cable
For continuous operation. Electrical sand bath with thermostatic temperature control and separate power controller. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50 mm. Stainless steel controller housing, with painted central section. Height-adjustable feet. Connection cable approximately 1.7 m. With earthed plug.
Sand bath ST with performance control, thermostatic controller and permanent connection
For continuous operation. Electrical sand bath with thermostatic temperature control and separate power controller. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50 mm. Stainless steel controller housing, with painted central section. Height-adjustable feet.
Screw Cap Trays for Storage Tubes Matrix™
Caps for 500 µl and 1.0 ml ScrewTop tubes in trays. Elastomeric gasket.
Screw caps for storage tubes Matrix™, PP
Caps for 500 µl and 1.0 ml ScrewTop tubes. Elastomeric gasket.
Sealing and Rupture Membranes, PFA, PTFE
1 set consisting of 10 sealing membranes made of PFA and 10 rupture membranes made of PTFE, for digestion vessels.
Serial heating units series KM-R3
LabHEAT®-Heating elements for flasks, round bottom. Serial heating unit in plastic coated, chemical-resistant metal housing with three heating positions. Each heating position is separately controlled via controller, 1.5 m supply (earthed) cable and RCD (residual current detection).Size and rating specifications are valid for each heating position.
Serial heating units series KM-R6
LabHEAT®-Heating elements for flasks, round bottom. Serial heating unit in plastic coated, chemical-resistant metal housing with six heating positions. Each heating position is separately controlled via controller, 1.5 m supply (earthed) cable and RCD (residual current detection).Size and rating specifications are valid for each heating position.
Shaker platform for incubator shaker INC 125 FS digital
Clamps can be attached to the shaker platform for safe shaking of Erlenmeyer flasks.Please order clamps separately.
Shaking device for waterbaths WTB
Shaking device for waterbaths incl. support frame, shaking frequency 35 - 160 strokes per minute (horizontal back/forth movement), requires gable cover. Voltage 230 V, 50/60 Hz. Please order the support basket separately.
Shaking Incubator 211DS
Due to a small footprint, compact, stackable design and expanded temperature range, this shaking incubator is ideal for molecular biology and general use. With integral orbital shaker. Two full and one half shelves are supplied with each incubator.Temperature control system SmartChek™Internal electrical outletFlask capacity: 4 x 1 l, 5 x 500 ml, 9 x 250 ml or 16 x 125 mlGasket door with large viewing area
Shaking Incubator 311DS
Incubator with built-in orbital shaker. Stable temperature conditions and a broad temperature range enables the use of this incubator for cell cultures, washing blots, bacterial cultures, yeast cultures, entomology studies, egg hatching, hybridization washes, mixing and re-suspensions. Opening the door stops operation of the shaker. The incubator is supplied with one shelf.Temperature control system SmartChek™Broad temperature rangeHigh uniformity and accuracyGasket door with large viewing areaAdjustable shelvesFlat platform with non-slip rubber mat, flask platforms, additional shelves please order separately.
Shaking incubator ES-20/80
For mixing and incubation of samples in a variety of flasks and vessels.Touchscreen display for quick parameter settingBluetooth® connectivity to PC for data management, data logging, parameter control and profilingStackable up to 3 unitsHeat resistant brushless fanTimer alarmChamber made of stainless steelPlease order platforms separately.
Shaking incubator ES-20/80C with cooling
For mixing and incubation of samples in a variety of flasks and vessels.Touchscreen display for quick parameter settingBluetooth® connectivity to PC for data management, data logging, parameter control and profilingStackable up to 3 unitsHeat resistant brushless fanTimer alarmChamber made of stainless steelWith Peltier modules for cooling of -12.5 °C below ambient temperatureExcellent sample temperature uniformityPlease order platforms separately.
Shaking Incubator SIM-200D-M
The SIM-200D-M has been designed specifically to combine a bench top laboratoryincubator with the specific mixing action required for microtitre plates. With a tight orbit of 1.5mm and a high speed shaking action between 250rpm and 1250rpm even the smallest of vessels can be adequately mixed.To minimize sample evaporation the SIM-200D-M is supplied with stainless steel water trays, these are strategically placed within the unit to maintain a humidity of up to 80%, thus dramatically reducing sample evaporation over a 24 hour period.
Shaking incubator Solaris™, with Peltier cooling
Shaking incubator for demanding tasks in research, production, and for routine tasks. With variable speed and temperature adjustment.For timer and continuous operation99 individual programs can be storedSoft start avoids abrupt starting and stopping movementsImbalance detection with optical/acoustic alarm: the device stops until the incorrect loading has been correctedLarge, easy-to-read touchscreen display with speed, temperature, and run time indication10 languages selectableWith maintenance-free, brushless motorMonitoring of alerts, alarms, and interaction protocols for more safety and reproducibilityUSB and Ethernet connection for data output and device monitoringEasily removable platform and rounded corners for quick cleaningWith refrigerant-free, environmentally friendly Peltier coolingScope of supply: Shaking incubator, mains cable, universal platform, platform screws, manual
Shaking Incubator Varioshake VS 150 OI
The shaking incubators Varioshake are characterised by their highest quality, durability and absolute reliability. Their stable, low-wear mechanics ensure particularly quiet operation and reliable continuous operation. They are specially designed for mixing and shaking with precisely reproducible orbital motion and temperatures of up to 70 ° C.With optimal temperature distribution in the entire usable space and extensive functionalityWith »GFL Technology« for the highest quality, reliability and durabilityThe devices can be optimally equipped for every need thanks to the extensive range of accessories2 shaking levels. With 2 front doors.Scope of supply: Shaking incubator with shelf rackPlease order trays, attachments and accessories separately.
Shaking Incubator Varioshake VS 45 OI
The shaking incubators Varioshake are characterised by their highest quality, durability and absolute reliability. Their stable, low-wear mechanics ensure particularly quiet operation and reliable continuous operation. They are specially designed for mixing and shaking with precisely reproducible orbital motion and temperatures of up to 70 ° C.With optimal temperature distribution in the entire usable space and extensive functionalityWith »GFL Technology« for the highest quality, reliability and durabilityThe devices can be optimally equipped for every need thanks to the extensive range of accessories2 shaking levels. With 1 front door.Scope of supply: Shaking incubator with shelf rackPlease order trays and accessories separately.
Shaking Incubator Varioshake VS 60 OI
The shaking incubators Varioshake are characterised by their highest quality, durability and absolute reliability. Their stable, low-wear mechanics ensure particularly quiet operation and reliable continuous operation. They are specially designed for mixing and shaking with precisely reproducible orbital motion and temperatures of up to 70 ° C.With optimal temperature distribution in the entire usable space and extensive functionalityWith »GFL Technology« for the highest quality, reliability and durabilityThe devices can be optimally equipped for every need thanks to the extensive range of accessories1 shaking level. With acrylic glass hood.Scope of supply: Shaking incubator with moving tablePlease order trays, attachments and accessories separately.
Shaking incubator with cooling ISICMBCDG
The Incubating/Cooling Orbital Shaker is microplate ready without the need for any additional accessories. Optional modular blocks can accommodate micro-tubes, centrifuge tubes, vials, or culture tubes. Unit holds microplates or modular blocks with a 127 mm tall interior capacity. Ideal for analyses that require a stable, controlled temperature.Heats to 65°C and cools to 10°C below ambientLED displays for temperature, speed and timeTemperature Calibration ModeTriple Eccentric DriveOverload ProtectionSpeed Ramping FeatureAudible AlarmCaution Hot IndicatorPolycarbonate LidScope of supply: Thermo Shaker incl. adapter bracket for blocksWithout blocks. Please order separately.