Refrigerated/heated calibration bath AP
Refrigerated/heated calibration baths are suitable for demanding temperature control tasks for applications in industry, quality control and life science. Accomodates up to 6 temperature measurement devices with a diameter of 2 to 8 mm. The calibration baths are additionally equipped with a reservoir drain and over-temperature protection and are supplied with an insulating, chemical-resitant DuraTop™ bath top.Advanced Programmable temperature controller11 languages: French, German, Spanish, Chinese, Portuguese, Russian, Hindi, Arabic, Italian, Korean, EnglishSwivel 180™ rotating controllerConnectivity: Ethernet, USB A and B, RS232/ adressable RS485, Remote On / Off, external temperature probeEvent scheduling (time and date), real-time clock, and temperature trends for up to 10 daysWhisperCool® Environmental Control SystemCool Command™ refrigeration systemWashable air filterAutomatic and/or user-adjustable performance optimisation10-point calibration capability
Refrigerated/heated circulating baths ecocoolR
Consisting of two models, all products in the ecocoolR range are supplied assembled as ready to use kits, complete with accessory hosing, clips and connectors as standard.Choice of two models, temperature range -25 °C to 150 °C (model dependent)3 year warranty with Grant renowned service and support, no registration requiredActive cooling through the whole temperature rangeTrue energy saving of up to 80 % against standard compressor unitsThermostat and chiller work in harmony, neither will operate alone, eliminating any danger of overheating or freezingSingle front switch for user convenienceModern, sleek, attractive design
Refrigerated/heated circulator HRC 2 GREEN basic
The compact refrigerated/heated circulator impresses with an operating temperature range of -30 to 100 °C and a powerful, continuously adjustable pressure and suction pump. The demand- and speed-controlled compressor, which is operated with natural refrigerant, achieves high energy efficiency. The insulation of the bath reservoir enables fast heat-up times and reduces heat input at low temperatures.Demand-controlled cooling unitNatural refrigerant R290Speed-controlled PEEK pumpDigital level indicatorIntegrated filling funnel and drain valve enable safe and clean handling of the thermofluidUse of up to 2.5 l of thermofluid without refillingEasy-to-clean stainless steel mesh air filterAdjustable safety circuitRS 232 and USB interfacesSafety classification III (FL) in accordance with DIN 12876The compact refrigerated/heated circulator impresses with an operating temperature range of -30 to 100 °C and a powerful, continuously adjustable pressure and suction pump. The demand- and speed-controlled compressor, which is operated with natural refrigerant, achieves high energy efficiency. The insulation of the bath reservoir enables fast heat-up times and reduces heat input at low temperatures.Demand-controlled cooling unitNatural refrigerant R290Speed-controlled PEEK pumpDigital level indicatorIntegrated filling funnel and drain valve enable safe and clean handling of the thermofluidUse of up to 2.5 l of thermofluid without refillingEasy-to-clean stainless steel mesh air filterAdjustable safety circuitRS 232 and USB interfacesSafety classification III (FL) in accordance with DIN 12876
Refrigerated/heated circulator HRC 2 GREEN control
The compact refrigerated/heated circulator impresses with an operating temperature range of -30 to 100 °C and a powerful, continuously adjustable pressure and suction pump. The demand- and speed-controlled compressor, which is operated with natural refrigerant, achieves high energy efficiency. The insulation of the bath reservoir enables fast heat-up times and reduces heat input at low temperatures.Demand-controlled cooling unitNatural refrigerant R290Speed-controlled PEEK pumpDigital level indicatorIntegrated filling funnel and drain valve enable safe and clean handling of the thermofluidUse of up to 2.5 l of thermofluid without refillingEasy-to-clean stainless steel mesh air filterAdjustable safety circuitRS 232 and USB interfacesSafety classification III (FL) in accordance with DIN 12876With wireless controller (WiCo)LEMO socket for connecting an external PT 100 temperature sensor10 freely programmable temperature ramps with 10 steps eachTimer/counter functionDegassing functionConnection for solenoid valves (Multi IO)Alarm output (Multi IO)Standby contact input (Multi IO)
Refrigeration Bath Circulators to -45 °C
HUBER refrigerated bath circulators perform safe and repeatable heating and cooling tasks in the lab. The models are covering the range to -45°C with a selection of heating and cooling powers are available with air or water cooling (w). Natural refrigerants for environmentally friendly operation are available on request. A powerful variable speed pressure/suction pump allows the thermoregulation of objects directly in the bath or can be used to control external applications. The pump speed is stepless and when used in combination with an optional pressure sensor the maximum pressure can be controlled. VPC (Variable Pressure Control) ensures the best circulation and protects delicate glass apparatus from breakage caused by overpressure.Small volume and high heating and cooling powers result in the shortest heating and cooling rates. Optional displacement inserts reduce the bath volume by half increasing this effect. Additionally the bath surface area is reduced, lowering moisture absorption. The optional calibration insert allows all HUBER refrigeration circulators to be used as calibration baths. The calibration insert ensures an even temperature distribution with a temperature stability of ±0.01K. All models have Active Cooling Control for cooling power control at the maximum working temperature and an automatic cooling power regulation for energy saving operation and reduced heat dissipation into the lab. Depending on the model carry handles or castors are fitted for easy transportation. The drain is located on the front of the unit to enable simple drainage of the bath. The cover plate is thermoregulated to avoid condensation. All models have the Pilot ONE with Plug & Play technology which can be simply swapped in the event of a service. The Pilot ONE can be used as a remote control (with data cable). The Pilot ONE is a high tech microprocessor based controller with a high precision measurement system for exact and reproducible results. The wide ranging functionality is supported by a large TFT display and simple operation. HUBER refrigeration circulators can be equipped with a Com.G@te to the NAMUR standard to enable integration in a process control system. Depending on the bath dimensions objects can be thermoregulated within the bath. Typical applications for these classics are the thermoregulation of externally closed systems, e.g. photometer, refractometer, viscosimeter, double-jacketed reactors and autoclaves. They are used in miniplants, kilo labs, for stock point measurement, for low temperature calibration, for petroleum tests and many more applications.Option: Natural refrigerant available on requestPump dataMax. pressure:25 L/min / 0.7 barMax. suction:18.5 L/min / 0.4 barTemp. stability acc. to DIN 12876:0.02 K*with displacement insert
Refrigeration Bath circulators to -55°C
Compact design and high cooling capacity at low temperatures.Option: Natural refrigerant available on requestHeating capacity CC-505 / CC-505wl: CC-508 to CC-525w: 1.5 kW 3.0 kWPump data CC-505 to CC-525w Max. pressure: Max. suction: 25 L/min / 0.7 bar 18.5 L/min / 0.4 barSupply requirement CC-505 to CC-508w: CC-510 to CC-525w: 230 V / 50 Hz 400 V / 50 HzTemp. stability acc. to DIN 12876:+/-0.02 K*with displacement insertFunction version available by E-grade.
Refrigeration unit R4R
This refrigeration unit can be switched off independently of the heating circulator to allow heating only applicationsNo spill valved front drainEnvironmentally friendly refrigerant (R290)Relay to enable switching off the refrigeration system in a programSpezificationsCapacity:20 lTemperature range:-30 ... 100 °CCooling capacity (20/0/-10/-20/-30 °C):0.9/0.5/0.3/0.18/0.04 kW
Refrigerator connection cable for ultra-low temperature freezers UF V
5 m long refrigerator connection cable C13.
Refrigerator drawers AluCool® including dividers
High quality aluminium drawers including frame on smooth-running wheels with pull-out stop. Includes flexible dividing system with card pockets. Depending on the specific need, the dividing system allows the storage of drugs, blood and plasma with a space saving of up to 30 %. With a few simple steps, the flexible dividers are taken out and the drawer can be cleaned easily and hygienically.The AluCool® drawers can be retrofitted at any refrigerator - to save and optimise valuable space.Tool-free assembly without damaging the refrigerator interior.Division: 3 channels with 12 universal dividers. Width of the channels can be changed in 1cm steps.
Refrigerator FKU 1800
The refrigerator can be integrated underneath a worktop to save space.Efficient refrigeration system with static coolingDigital temperature displayLED interior lightingAutomatic defrostingLockable doorDoor hinge right, exchangeableEnvironmentally friendly, natural refrigerant R 600a
Refrigerator MRFvc Performance
Refrigerator with convection cooling ensures fast cooling and a homogeneous cooling temperature inside.Analogue temperature display insideEnvironmentally friendly thanks to natural refrigerant R 600aWith auto defrostDoor hinge right, exchangeableIncl. lock
Reinforced racks for BINDER chambers and incubators, stainless steel
Inclusive fasteners.
Reservoirs for flake ice maker MF series
Reservoirs with slanted front for easy access to the ice. Insulated and rounded inside. Easy cleaning and maintenance.
Ribbed plates for muffle and ashing furnaces, ceramic
For temperatures up to max. 1200 °C.
Roller base for Liquid nitrogen container BIO GT
The roller base facilitates the transport of liquid nitrogen containers.Please specify model no. when ordering.
Safety Boxes, Styrofoam® (EPS) with lid
For glass bottles with dangerous contents. With BAM approval.
Safety drying oven FDL
A safety drying oven from BINDER ensures the perfect test result of your solvent-based paints and coatings, absolute temperature precision even with high ventilation.Defined solvent quantity according to EN 1539Electronically controlled APT.line™ preheating chamber technologyIndependent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarmRS 422 interface for use with APT-COM™ DataControlSystem communication softwareFresh-air monitoring with audible and visual alarm and automatic deactivation of heatingController with time-segment and real-time programmingEasy replaceable fresh air cartridge ensures constant fresh air qualityStandard door gasket made from solvent-resistant FKM for use at up to 200 °C2 chrome-plated racks
Safety spring lock for cryogenic racks
To hold cryogenic boxes in the rack to stop them sliding out when tilted. The clip is placed onto the box above the top edge and slid into the cryogenic rack. Fits all sizes of cryogenic racks. Universally applicable for all manufacturers.