Microbiological incubators Heratherm™ Advanced Protocol Security, tabletop models with stainless steel exterior housing
Incubators with additional safety features for ultimate sample protection. The 140 °C decontamination cycle is certified by an accredited microbiological institute and eliminates the need for separate autoclaving of internal fittings, as unwanted microorganisms are reduced to a minimum within 6 hours.Intuitive operation for easy temperature settingEasy-to-read, large vacuum fluorescence displayInternal glass door for safe observation of samples without affecting the temperatureAdvanced digital timer for daily/weekly on/off cyclesAudible alarm if door is left open accidentallyAutomatic alarm for over- and under-temperatureEasy cleaning of the interior due to rounded cornersChamber made of corrosion-resistant stainless steelEfficient use of the interior with the flexible shelf systemIncubators with stainless steel exterior housingWith Dual convection technologyFan speed adjustable (0 to 100 %)Lockable incubator door with alarm for restricted accessEasily stackable without tools or stacking framesCompact dimensions for space optimisation on the lab bench
Microbiological incubators Heratherm™ Advanced Protocol, with powder-coated exterior housing
Incubators with Dual convection technology are ideal for drying applications.Intuitive operation for easy temperature settingEasy-to-read, large vacuum fluorescence displayInternal glass door for safe observation of samples without affecting the temperatureFan speed adjustable (0 to 100 %)Advanced digital timer for daily/weekly on/off cyclesEasy cleaning of the interior due to rounded cornersChamber made of corrosion-resistant stainless steelEfficient use of the interior with the flexible shelf systemCompact dimensions for space optimisation on the lab benchTable-top units easily stackable without tools or stacking framesIncubators with powder-coated steel exterior housing
Microbiological incubators Heratherm™ General Protocol
Thermo Scientific™ Heratherm™ General Protocol incubators have been designed for routine applications in pharmaceutical, medical, food and research laboratories. Gravity convection provides gentle air flow and minimal drying out.Corrosion resistant stainless steel chamber (1.4016)Intuitive user interface for easy temperature settingLarge vacuum fluorescent display for easy readingSafe view of samples through internal glass door, without impact on temperatureAutomatic overtemperature alarmEasy to clean interior with rounded cornersEfficient small footprint to optimize benchtop spaceEfficient utilization of interior with flexible shelf systemTabletop models conveniently stackable without the need for tools or stacking kitsLockable casters for easy mobility and stability (floor models only)
Microbiological rapid tests Dual agar Lovibond® Dipslides
The Lovibond® Dipslides are designed to test liquids as well as surfaces. They are ideal for use in many applications including evaporative cooling towers, closed water circuits, cutting fluids, food testing, and many more.These dual-sided Dipslides are available in a wide range of different media types.
Microcentrifuge Tube Storage Boxes Nalgene™, Type 5055, PC
Safely store samples using Microcentrifuge Tube Storage Boxes. High-temperature polyurethane foam insert securely holds 64 or 81 microcentrifuge tubes sized 0.2, 0.5 or 1.5 ml.bottom constructed in white and lid in transparent polycarbonatetemperature resistant from -135 to 121 °Cwith grid numbers for reliable identification of individual samples
Microplate incubator INC-200D-M
A dedicated microtitration plate incubator, working volume 20 litres. Up to 48 x 96-well plates can be held, evenly distributed onto four pull-out stainless steel shelves, one or two layers deep. Precise, even temperature control is maintained throughout the chamber by forced circulation of preheated air from one side to the other across the plates. When filled with 24 x 96-well plates evenly distributed and at a temperature setting of +37°C, variation of temperature between shelves is maintained to within ±0.5°C and fluctuation to within ±0.5°C. A removable stainless steel tray in the chamber base may be filled with water to increase humidity. The 10mm clear acrylic door opens upwards. For 230V 50Hz single phase supplies, 280W.With BioCote, silver-based, antimicrobial protection.
Microtube block thermostat BTD
Grantás block heating system BTD with fixed block is designed for rapid and precise heating of microtubes up to 100ºC.Digital temperature control for optimum precisionHeating block holds combinations of four microtube sizes simultaneously - up to a total of 49 tubes: 24 x 1.5/2.0 ml, 15 x 0.5 ml, 10 x 0.2 mlFlexible tube sizes and rapid heat-up time enables swift change of applicationConvenient integral timer for time-sensitive incubationsSturdy, durable, easy-to-clean plastic construction; compact design with small footprint2-line display for simple and precise setting of temperature/time and for monitoring current status during operationSpecificationsTemperature range:ambient +5 to 100°CStability at 37°C:±0.1°CUniformity:±0.1°CHeat-up times:25ºC to 100ºC in 15 min 25ºC to 37ºC in 4 minTimer:1 min to 96 hPower supply:230V, 50/60Hz
Microtube Storage Boxes, PC
Manufactured from polycarbonate with high mechanical strength and high temperature resistance between -196 to +121°C. Uniquely designed to carry 81 cryo tubes in 9 x 9 array "Hedgehog" designed tube compartments holds the tube in their position firmly. Unique design with vent and drainage holes guarantees best, efficient air circulation. Forward slope base ensures quick visual orientation. Easily stackable for reducing storage space. Hinged lid with built-in stop allows easy one-handed access to tubes. Clear box lid enables easy identification of box content and protects the tubes from dust, moisture and other environmental effects. Alphanumerical index both on tube rows and the lid enables easy identification of tube positions. Box is supplied together with a disposable forceps, made from ABS, with fine end for easy handling and fast removal of tubes.
Microtube Storage Boxes, PP, 50-/100-Well
Autoclavable. Compact storage box has angled front slot for easy access to tubes. Rugged, polypropylene box has durable three-point hinges, snapping clasp for secure closure, moulded grid lines on lid, imprinted coordinates on bottom of base and imprinted and raised coordinates on tube wells. Ideal for sample or case study storage.Holds 1.5 ml to 2.0 ml microtubes. Resist storage temperatures from -80 to 121 °C.
Microtube storage boxes, PP, 50-/100-Well, set
Autoclavable. Compact storage box has angled front slot for easy access to tubes. Rugged, polypropylene box has durable three-point hinges, snapping clasp for secure closure, moulded grid lines on lid, imprinted coordinates on bottom of base and imprinted and raised coordinates on tube wells. Ideal for sample or case study storage. Holds 1.5 ml to 2.0 ml microtubes. Resist storage temperatures from -80 to 121 °C.The set contains the colours blue, green, violet, yellow and orange.
Microwave MW 7772
Microwave with large turntable and 5 power levels for heating and defrosting.Defrosting programme by weight and time35 min. timer with acoustic signalRemovable turntable (Ø 315 mm)Lacquered interiorHighly heat-resistant housing
Mini coolers, PC
Mini coolers are designed to protect a wide range of solutions (enzymes, DNA, RNA, cell suspensions) by helping to maintain freezer temperatures on the lab bench. Durable polycarbonate filled with non-toxic gel. Mini coolers hold twelve 0.5 ml to 2.0 ml tubes.
Mini cooling incubator LLG-uniINCU 20 cool
Digital mini incubator with cooling and heating function for cultivation of biological samples in small-volume vessels. With internal power outlet for positioning small shakers, mixers, or other devices in the inner chamber. Due to its small footprint, the LLG-uniINCU 20 cool is ideal for small laboratories and educational institutions.Good temperature stability of the set temperature (up to 15 °C below ambient temperature) in the inner chamber of the cooling incubatorLarge inner chamber with 22 l capacityFast heating and homogeneous temperatureWith built-in calibration function of up to ±5 °CTemperature accuracy is ±0.5 °C (at 37 °C)Temperature uniformity is ±1.5 °C (at 37 °C)Scope of supply: Incubator, 1 x shelf, 1 x drip tray, 1 x power supply unit, 1 x power cable, operating instructions
Mini Incubator, with Mini LabRoller™ and rotisseries
Compact incubator is suitable for microbiological and haematological applications, such as cultivation of Petri dishes, microtitre plates, and other small-volume vessels.Interior volume of 9.2 lDoor with large windowCable port on the backPort for a thermometer on the topAnalogue control2 shelf levelsThe incubator is supplied with Mini LabRoller™ and rotisseries for 1.5 ml, 15 ml, and 50 ml tubes.
Mini Incubator, with shelf
Compact incubator is suitable for microbiological and haematological applications, such as cultivation of Petri dishes, microtitre plates, and other small-volume vessels.Interior volume of 9.2 lDoor with large windowCable port on the backPort for a thermometer on the topAnalogue control2 shelf levelsThe incubator is supplied with one shelf.
Mini-Freezer KBT 08-51, with ST100 control
The mini-freezers are the ideal solution for chilling material samples directly at the workplace.Refrigeration unit: low noise, air-cooled, low maintenancewith natural refrigerant R-1270Housing parts made of high quality stainless steelInsulated stainless steel hinges and hinged lid with magnetic sealRam protection ring going over and underMicroprocessor-controlled, with membrane keyboard and easy-to-read LED displayProtection against unintentional activationAlarm system that is separate from the mains, with battery capacity for approx. 72 hoursDisplay of the maximum temperature reached in the interior area during the faultRS485 interface, potential-free contact for connection to an external alarm system and 100 mV/K outputOptical and acoustic alarm
Mini-Freezer KBT 08-51, with ST71 control
The mini-freezers are the ideal solution for chilling material samples directly at the workplace.Refrigeration unit: low noise, air-cooled, low maintenancewith natural refrigerant R-1270Housing parts made of high quality stainless steelInsulated stainless steel hinges and hinged lid with magnetic sealRam protection ring going over and underElectronic temperature control with LED displayOptical and acoustic alarm
Mini-Freezer KBT 18-41, with ST100 control and circulation air fan
The mini-freezers are the ideal solution for chilling material samples directly at the workplace.Refrigeration unit: low noise, air-cooled, low maintenancewith natural refrigerant R-1270Housing parts made of high quality stainless steelInsulated stainless steel hinges and hinged lid with magnetic sealRam protection ring going over and underMicroprocessor-controlled, with membrane keyboard and easy-to-read LED displayProtection against unintentional activationAlarm system that is separate from the mains, with battery capacity for approx. 72 hoursDisplay of the maximum temperature reached in the interior area during the faultRS485 interface, potential-free contact for connection to an external alarm system and 100 mV/K outputOptical and acoustic alarm
Mini-Incubator CULTURA® M, with Multirack
The CULTURA® M Mini-Incubator has specifically been designed for the incubation of contact slides and dipslides, as well as common Petri dishes for detecting bacteria, fungi, and yeasts. With its extremely small footprint, it can easily be transported wherever you need to use it. The CULTURA® M incubator has an internal capacity of approximately 4 l. It is used in the areas of medical diagnostics and water analytics. The transparent door allows monitoring of the interior without opening the incubator.Supplied with one Multirack for the incubation of up to 18 dipslides and a thermometer.
Mini-Incubator CULTURA® M, with Multirack and LLG-Min/Max Digital-Thermometer
The CULTURA® M Mini-Incubator has specifically been designed for the incubation of contact slides and dipslides, as well as common Petri dishes for detecting bacteria, fungi, and yeasts. With its extremely small footprint, it can easily be transported wherever you need to use it. The CULTURA® M incubator has an internal capacity of approximately 4 l. It is used in the areas of medical diagnostics and water analytics. The transparent door allows monitoring of the interior without opening the incubator.Supplied with one Multirack for the incubation of up to 18 dipslides, one shelf, and one thermometer.Supplied with a free LLG-Min/Max Digital-Thermometer with outdoor sensor.
Mini-Incubator CULTURA® M, with shelf
The CULTURA® M Mini-Incubator has specifically been designed for the incubation of contact slides and dipslides, as well as common Petri dishes for detecting bacteria, fungi, and yeasts. With its extremely small footprint, it can easily be transported wherever you need to use it. The CULTURA® M incubator has an internal capacity of approximately 4 l. It is used in the areas of medical diagnostics and water analytics. The transparent door allows monitoring of the interior without opening the incubator.Supplied with one shelf and one thermometer.
Mini-Incubator Heratherm™ Compact IMC 18
The most compact unit of the Heratherm™ microbiological incubator family has an 18 l capacity, ideal for personalized workspace.Minimal footprint for space restricted lab areasTemperatures at or below ambientHigh temperature accuracyInternal light facilitates sample observationThe most compact unit of the Heratherm™ microbiological incubator family has an 18 l capacity, ideal for personalized workspace.Minimal footprint for space restricted lab areasTemperatures at or below ambientHigh temperature accuracyInternal light facilitates sample observation
Mini-Incubator Heratherm™ Compact IMC 18, with darkened windscreen
The most compact unit of the Heratherm™ microbiological incubator family has an 18 l capacity, ideal for personalized workspace.Minimal footprint for space restricted lab areasTemperatures at or below ambientHigh temperature accuracyInternal light facilitates sample observationMini-Incubator with darkened windscreen
Miniboxes for CryoTubes™, PS
Miniboxes made from High Impact Polystyrene (HIPS) are ideal for the transport of CryoTubes™.