LLG-Evaporating dishes with flat bottom, porcelain, medium form
Ideal for evaporating liquids or solvents. Glazed on the inside and outside.With spoutTemperature resistant up to 900 °C
LLG-Floating pellets, PP
Pellets with 20 mm diameter. Can cover 0.1 m². Protect against evaporation and rapid temperature loss. Decreases hazardous vapors. Resistant against most acids, bases, solvents and mineral oils. Temperature stable up to 100 °C.
LLG-Freezing container
The LLG-Freezing container is a simple system for rapid cryo preservation of cells in a freezer. Up to 18 cryovials with a volume of 1 or 1.8 ml can be placed in the freezing container.Made of PC with HDPE closureCooling rate of -1 °C/min100 % isopropyl alcohol is required for use.
LLG-Laboratory Power Failure Detector
Immediate visual and acoustic alarmAlarm can sound for short power outages, or for larger periods of at least 12 hours (can be switched off manually).Plug safety cover offers protection against accidental disconnection of plugMaximum total power of connected devices. 3500W power supply 230V 50HzSuitable for European plugsMax. Rating 16 AWith built-in batteryScope of supply:1 x power failure detector2 x plug safety caps2 x screws
LLG-Partition inserts for Cryoboxes, 136 x 136
For cryoboxes 136 x 136mm. With compartment heights and formats as indicated. Other sizes available on request.
LLG-Partition inserts for LLG-Cryoboxes, white
With compartment heights and formats as indicated. Other sizes available on request.
LLG-Petri dishes, PS
Made of high quality optical clear polystyrene. Produced under aseptic conditions in an ISO 6 cleanroom.With a smooth surface for an optimal distribution of the transport mediumStable thickness to prevent any deformations while usingStackableWith or without ventsAseptic (Ø 90 mm), non-sterile (Ø 60 mm) or beta irradiated sterile versions (all sizes)Packed in sleeves á 10 dishes or 20 dishes (Ø 90 mm)For research and development only.
LLG-Temperature block exact, aluminium
Suitable for both cooling and heating, universally usable, uniform temperature distribution within the block, ideal for all temperature-sensitive applications.Aluminum blocks with conical compartments and closed bottom for easy and precise tempering of reaction tubes and PCR tubes. The precisely adapted shape of the borings and the closed bottom offer advantages compared with cylindrical drilled blocks with open bottom, such as much better heat transfer and temperature accuracy. Made of a special aluminum alloy with high thermal conductivity. Identical temperature conditions for all samples. Compact size, requiring little space. Suitable for 96-well plates, 8 or 12 strips and single tubes. Ideal for working with 8- or 12-channel pipettes. Blocks for different tube sizes and combinations of tube sizes as indicated, all working steps in one block, holes closed at the bottom and tapered to fit perfectly the respective tube sizes and offer an optimum heat exchange.
Locator Rack & Box Systems
Available with or without ultrasonic level monitor, Thermo Scientific Locator indexed rack and box systems allow quick, efficient sample retrieval and offer cost effective maximum storage capacity (up to 6,000 samples) combined with minimum liquid nitrogen consumption.Outstanding temperature uniformity: samples are stored below -180 °C, even when less than 5cm of liquid nitrogen remains in the vesselOptional Ultrasonic Level Monitor safeguards irreplaceable samples with minimal liquid nitrogen evaporation and conductionOptional monitor provides continuous LED readout of liquid nitrogen level in 1/8 incrementsAudible alarm sounds when nitrogen level falls below safe range; dry remote alarm contact for remote monitoringAdvanced vacuum insulation minimizes liquid nitrogen evaporation and reduces operating costsSecure locking hasp prevents unauthorized entry
Lockable bath cover for heating and refrigerated circulators MAGIO™ / DYNEO™ / CORIO™
Minimizes oil vapors and odors at high bath temperatures.Suitable for heating circulators with the bath type BC12 and refrigerated circulators with the bath types 600F, 601F, 1000F.
Magnetic microtube boxes
Box with lid for holding microtubes. The box can be attached to the magnetic platform.
MaloClean Aquastabil
Stabilising agent for water baths, thermostats etc.Should be prepared with distilled water if possible.Attention: Toxic to aquatic organisms with long-term effects. Avoid release into the environment.
Material test chamber FP series
The material test chambers with mechanical convection reliably ensure short drying times and fast heating. Thanks to programme functions and adjustable fan, temperature and recirculation conditions can be individually controlled even over a longer period of time.High temperature accuracy due to APT.line™ technologyAdjustable fan speedController with interval and real-time programmingUser-friendly controller with large displayElectromechanical control of the exhaust air flapClass 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/acoustic alarm selectable on controllerModels up to 115 l stackableErgonomic handle designComputer interface: EthernetInternal data logger, measured values can be read out in open format via USB
Material test chamber M
The material test chambers are suitable for material testing and ageing tests thanks to their versatile programming options. Powerful fan with high air flow rate ensures fast heat-up.High temperature accuracy thanks to APT.line™ technology with increased heating outputReinforced fan with adjustable speedElectromechanical control of the exhaust air flapTouchscreen controller with time-segment and real-time programmingClass 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/acoustic alarm available for selection on the controllerFailsafe function-backup sensor Pt 100Internal data logger, measured values can be read out in open format via USBEthernet interface2 chrome-plated racks
MaxQ 6000 Incubated and Refrigerated Stackable Shakers, orbital
Units can be stacked two high on the floor with the stacking kit accessorySpeed range: 15 to 300 rpm (stacked), 15 to 500 rpm (unstacked)Two adjustable-height shelves provide added storageLarge viewing window and internal light offer sample visibilityView temperature, speed and time simultaneously on three individual displaysDoor can be hinged from the right or left by the user for convenient placement in labTriple eccentric drive handles heavy loads, provides uniform agitation and continuous 24-hour operation, even at high speedsVisual/audible alarms alert you to temperature deviations. Heat turns off if temperature deviates ±1 °C of set pointShaker shut down and visual/audible alarms signal if unit operates ±10 % of set speed, preventing shaker from movingUnbalanced load sensor stops platform motion when excess vibration is detected visual/audio alarms signal until condition is correctedSoft start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closureRetains parameters during power failure and restarts unit automatically after power is restoredOver-temperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller failsSafety interlock stops shaking motion when the door is open5 year warranty and 10 year on drive mechanism
MaxQ 8000 Incubated and Refrigerated Stackable Shakers
Can be Stacked Two to Three High on the Floor for Space SavingsChoose from two temperature ranges to fulfill a number of molecular biology applications.HEPA filter ensures air inside the chamber remains clean and reduces cross contamination improving culturing conditions.Slide out platform provides convenient 100% sample access.Crevice-free Type 304 stainless steel chamber with coved corners and built-in drain keeps spills within the work area and promotes easy cleaning.Chamber is tall enough to accommodate 2L Erlenmeyer flasks.Top platform height is under 61.0 in. (154.9 cm) when units are stacked three high, ensuring ease-of-use and convenient accessibility.Easy to clean platforms are constructed of 5/16 in., heavy duty brushed anodized aluminum, which does not chip or rust.Large viewing window and internal xenon light allow sample visibility minimizing the need to open the chamber door.Electronic components and HEPA filter are easily accessed from the front of the unit, eliminating the need to move the shaker during regular maintenance or service.5 year warranty and 10 year on drive mechanism.For a complete system order:1. Shaker, 2. Platform, 3. Clamps
Metal-cased heating mantles KM-MEB series
With corrosion-resistant stainless steel heating bowl to protect against leaking liquid resulting of a broken flask.Increased working safety in the labPlastic-coated, chemically resistant metal housingPredrilled threaded hole on rear allows to fix the stativ clamp2 heating zonesWith built-in controller allows a continuous adjustment of power outletThermally insulated and earthedWith built-in heating zone switch and residual current detection (RCD)
Metal-cased heating mantles series KM-M, without controller
LabHEAT® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch; max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection).
Metal-cased heating mantles series KM-ME, with controller
LabHEAT® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch, in addition equipped with a controller which allows a continuous adjustment of the heater power; max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection).
Metal-cased heating mantles series KM-MHB
LabHEAT® - Heating mantles for high form beakers. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing, with built-in power-on and heating zone switch, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection).
Metal-cased heating mantles series KM-MNB
LabHEAT® - Heating mantles for low form beakers. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing, with built-in power-on and heating zone switch, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection)..
Microbiological incubators Heratherm™ Advanced Protocol Security, floor-standing models with powder-coated exterior housing
Incubators with additional safety features for ultimate sample protection. The 140 °C decontamination cycle is certified by an accredited microbiological institute and eliminates the need for separate autoclaving of internal fittings, as unwanted microorganisms are reduced to a minimum within 6 hours.Intuitive operation for easy temperature settingEasy-to-read, large vacuum fluorescence displayInternal glass door for safe observation of samples without affecting the temperatureAdvanced digital timer for daily/weekly on/off cyclesAudible alarm if door is left open accidentallyAutomatic alarm for over- and under-temperatureEasy cleaning of the interior due to rounded cornersChamber made of corrosion-resistant stainless steelEfficient use of the interior with the flexible shelf systemIncubators with powder-coated steel exterior housingWith mechanical convectionFan speed adjustable (slow/high speed)
Microbiological incubators Heratherm™ Advanced Protocol Security, floor-standing models with stainless steel exterior housing
Incubators with additional safety features for ultimate sample protection. The 140 °C decontamination cycle is certified by an accredited microbiological institute and eliminates the need for separate autoclaving of internal fittings, as unwanted microorganisms are reduced to a minimum within 6 hours.Intuitive operation for easy temperature settingEasy-to-read, large vacuum fluorescence displayInternal glass door for safe observation of samples without affecting the temperatureAdvanced digital timer for daily/weekly on/off cyclesAudible alarm if door is left open accidentallyAutomatic alarm for over- and under-temperatureEasy cleaning of the interior due to rounded cornersChamber made of corrosion-resistant stainless steelEfficient use of the interior with the flexible shelf systemIncubators with stainless steel exterior housingWith mechanical convectionFan speed adjustable (slow/high speed)
Microbiological incubators Heratherm™ Advanced Protocol Security, tabletop models with powder-coated exterior housing
Incubators with additional safety features for ultimate sample protection. The 140 °C decontamination cycle is certified by an accredited microbiological institute and eliminates the need for separate autoclaving of internal fittings, as unwanted microorganisms are reduced to a minimum within 6 hours.Intuitive operation for easy temperature settingEasy-to-read, large vacuum fluorescence displayInternal glass door for safe observation of samples without affecting the temperatureAdvanced digital timer for daily/weekly on/off cyclesAudible alarm if door is left open accidentallyAutomatic alarm for over- and under-temperatureEasy cleaning of the interior due to rounded cornersChamber made of corrosion-resistant stainless steelEfficient use of the interior with the flexible shelf systemIncubators with powder-coated steel exterior housingWith Dual convection technologyFan speed adjustable (0 to 100 %)Lockable incubator door with alarm for restricted accessEasily stackable without tools or stacking framesCompact dimensions for space optimisation on the lab bench