Cooled incubator FOC IL, with transparent inner door and illuminated shelves
Versatile cooled incubators with auto-tuning temperature control system for optimal temperature stability. With the optional Software TEMPSoft™, times, temperatures, ramps, and alarm thresholds can be set.2 internal sockets for further devicesWireless (WI-FI) and wired data transmission (RS485)Front 3 button panel (Set, "+", "-")Forced ventilation for uniform temperature distributionEco-friendly cooling system2 of 3 shelves are equipped with LED light strips (30000 LUX/shelf)Timer for adjustable lighting cycles
Cooled incubator FTC 120
Cooled incubator with class A+ energy efficiency. Especially designed for BOD measurements.Fixed temperature of 20 °C.For up to 3 x BOD sensor system 6 bottles or 2 x BOD sensor system 10 bottles2 internal sockets for further devicesForced ventilation for uniform temperature distribution2-digit display for indoor temperatureHigh efficiency, low operating costsScope of supply: Cooled incubator, 2 shelves
Cooled incubators FOC E
Versatile cooled incubators with auto-tuning temperature control system for optimal temperature stability. With the optional Software TEMPSoft™, times, temperatures, ramps, and alarm thresholds can be set.2 internal sockets for further devicesWireless (WI-FI) and wired data transmission (RS485)Front 3 button panel (Set, "+", "-")Forced ventilation for uniform temperature distributionEco-friendly cooling systemVersatile cooled incubators with auto-tuning temperature control system for optimal temperature stability. With the optional Software TEMPSoft™, times, temperatures, ramps, and alarm thresholds can be set.2 internal sockets for further devicesWireless (WI-FI) and wired data transmission (RS485)Front 3 button panel (Set, "+", "-")Forced ventilation for uniform temperature distributionEco-friendly cooling system
Cooled incubators FOC I, with transparent inner door
Versatile cooled incubators with auto-tuning temperature control system for optimal temperature stability. With the optional Software TEMPSoft™, times, temperatures, ramps, and alarm thresholds can be set.2 internal sockets for further devicesWireless (WI-FI) and wired data transmission (RS485)Front 3 button panel (Set, "+", "-")Forced ventilation for uniform temperature distributionEco-friendly cooling systemVersatile cooled incubators with auto-tuning temperature control system for optimal temperature stability. With the optional Software TEMPSoft™, times, temperatures, ramps, and alarm thresholds can be set.2 internal sockets for further devicesWireless (WI-FI) and wired data transmission (RS485)Front 3 button panel (Set, "+", "-")Forced ventilation for uniform temperature distributionEco-friendly cooling system
Cooled incubators with compressor cooling ICP
The cooled incubators with the unique ControlCOCKPIT for a quick and intuitive operation. Ideal at temperatures around zero and below. For rapid and precise alternation between heating up and cooling down times in ramp operation. Extraordinarily quiet.Standard equipment :PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel, material 1.4301 (ASTM 304) very stable and easy to cleanStructured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel (all sizes mounted on lockable castors)High-temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamber.Adjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPITTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Cooling bag Fold'N Cool™
The cooler Fold'N Cool™ 30 L has a wide range of uses and can be laid flat after use. 1 large front pocket with zip, 2 carrying handles and hanging loop.100 % polyester with PU coating on the backEasy-to-clean inner material, food-free PEVAIsolation: high-performance EPE foamDark blue / grey
Cooling block system IsoTherm-System®, IsoPack and IsoRack set
Modular system for transporting, storing, and gently thawing deep-frozen samples.Holds 24 tubes (1.5 ml, 2 ml)IsoPack (cold pack) white holds 0 °C for up to 6 h and blue holds -21°C for up to 3 h, pre-cooling in the freezerNo more melting ice baths (contamination risk)All system components can be used separatelyRacks can be stacked, are autoclavable, float in water and can be centrifuged in a microtitration plate rotorScope of supply: 1 x IsoRack (work rack), 1 x IsoPack (cold pack)
Cooling Block Systems, FreezeBox™
Blue. FreezeBox™ is a new, energy-saving, environmentally friendly and safe cooling equipment, without additives. It does not require electricity (except for pre-cooling the cores in the freezer) and no ice for low-temperature cooling of biological samples. The system can be used ice-free, is lightweight, easy to transport and ideal for the collection and storage of biological samples. It can be combined with interchangeable cores and different tube modules. Cooling cores can be tempered in a refrigerator or freezer and inserted into the FreezeBox™. For operation with dry ice, leave out the cooling core and fill with 200 g dry ice instead.For use with cooling core, ice or dry iceEasy to clean and disinfectDurable, suitable for frequent useEasy to mount
Cooling boxes Powerbox® Plus
Cooling capacity: 22 °C (± 1 °C) below ambient temperature.
Cooling boxes Powerbox® Plus, with mains connection
Cooling capacity: 19 °C (± 1 °C) below ambient temperature. With plugs for 12 V car connection and 230 V socket.
Cooling Boxes, Icetime® Plus
Strong, high quality PU insulation,Lockable lid, which clicks audibly when closingHandle for easy transport
Cooling Boxes, Isotherm Extreme
Strong, high quality PU insulationCompact and robust cool boxesCover can be locked with carrier bracketRubber seal for airtight seal
Cooling boxes, PUR, with lid
For bench-top cold storage.Durable, rigid polyurethane foamGood insulating propertiesImproved stability because of sturdy, octagonal designStackableSuitable for chemical disinfectionOperating temperature -196 °C to 95 °C
Cooling circulator Variostat® for a variety of baths
This unique immersion circulator can thermoregulate a wide range of baths between -30°C and 150°C. This innovative construction allows the user ultimate flexibility. The circulation can be adjusted to suit the bath size using the stepless, variable speed suction/pressure pump. The pump can also be controlled with an optional pressure sensor for external applications.
Cooling circulators
Combinations of immersion circulators and insulated refrigeration baths are low-cost solutions for direct thermoregulation within the temperature range -20/-30°C to +200°C. The refrigeration baths operate with natural refrigerants. A pump adapter (optional) can be fitted for thermoregulation of externally closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore suitable for external open thermoregulation applications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the KISS models.
Cooling coil for water baths PURA™
Suitable for temperature control tasks close to ambient temperature.
Cooling incubator INC 125 FC
Ideal for microbiological applications thanks to the wide temperature range and precise temperature control. Resource and environmentally friendly thanks to powerful compressor cooling technology.Decontamination mode with 100 °CInternal air circulation can be influenced by electronically adjustable fan speedUse of the natural refrigerant R290Excellent temperature management and optimised energy consumption thanks to very good insulation of the inner chamberAdditional inner glass doorEasy cleaning of the spacious interior thanks to rounded corners and smooth surfacesDefrost function with continuous water drainage through drain openingDoor hinge on the right, can be changed on requestOptional lockable doorInstallation and operation qualification (IQ/OQ) available on requestScope of supply: Cooling incubator INC 125 FC, 2 x wire grid trays IO T 2.10, 2 x tilt protection/assembly material, USB A-B cable, calibration certificate at 37 °C and 10 °C, hose adapter (for Ø 9 to 11 mm)
Cooling incubator KB PRO
The cooling incubators of the KB PRO series are equipped with APT.line™ preheating chamber technology and an extended temperature range. With their comprehensive programming options, the cooling incubators cover a wide range of applications. They are equipped with proven compressor technology to ensure reliable and failsafe long-term operation. Thanks to the modern inverter cooling unit and the climate-neutral refrigerant R-290, energy-efficient and environmentally friendly cooling is guaranteed. The inner chamber and the two racks with telescopic rails are made of stainless steel, while the inner doors are made of metal oxide-coated safety glass.Adjustable fan speedDoor heating to prevent condensationIntuitive touchscreen controller with time-segment and real-time programmingErgonomically adjustable control terminal (for models from 470 l volume)Signal triangle with light-up status display (for models from 470 l volume)Internal data logger, measured values can be read out in open format via USB interfaceEthernet interfaceBINDER Multi Management Software APT-COM™ Basic EditionDevice self-test for comprehensive status analysisClass 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarmLarge access port with silicone plugTable-top device KB PRO 130 is stackableFloor-standing devices with robust twin casters with brakes at the frontModels 260, 470, and 720 can be optionally equipped with light modules for ICH photostability tests. With optional LED light modules, the KB PRO models from 260 upwards become a plant growth cabinet. Please order light modules separately.
Cooling incubator KB, white
The cooling incubators of the KB series feature APT.line™ preheating chamber technology and a large temperature range, making them suitable for a wide range of applications. They also feature a hot-air disinfection routine. The cooling incubators are equipped with proven compressor technology to ensure reliable and failsafe long-term operation. Thanks to the modern inverter cooling unit and the climate-neutral refrigerant R-600a, energy-efficient and environmentally friendly cooling is guaranteed. The interior and the two racks are made of stainless steel, while the inner doors are made of metal oxide-coated safety glass.Door heating to prevent condensationSimple programming of a second temperature setpointInternal data logger, measured values can be read out in open format via USB interfaceEthernet interfaceDevice self-test for comprehensive status analysisClass 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarmLarge access port with silicone plugTable-top devices are stackable (for models up to 130 l volume)Floor-standing devices with robust twin casters with brakes at the front
Cooling incubator KT
Cooling incubator with Peltier technology combines exceptional performance with low energy consumption and environmental friendliness.APT.line™ preheating chamber technologyHot air disinfection at 100 °CAdjustable fan speedController with time-segment and real-time programmingInner door made of tempered safety glass2 stainless steel racksClass 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarmComputer interface: EthernetData recording and USB interface
Cooling incubators KB ECO
Cooling incubator with environmentally friendly Peltier technology and APT.line™ preheating chamber technology for optimal incubation conditions. Ideal for applications in biotechnological, medical and pharmaceutical laboratories.Condensate and dry-out protection for all operating conditionsFail-safe operation due to intelligent thermoelectric temperature controlProgrammable temperatures for intermitted incubation and refrigerationAPT.line™ preheating chamber technologyAdjustable condensate protectionMinimal energy consumption thanks to Peltier technologyInner door made of safety glassInner chamber completely made of stainless steelInsertion grids made of stainless steelLCD display shows temperature, additional information and alarmsInternal data logger, measured values can be read out in open format via USBDevice self-test for status analysis
Cooling water relay LKR 3000
The device is used for moitoring cooling water circuits. Because of the high braking capacity thermostats and cryostats are also connectable. A reliable water flow sensor.SpecificationsPlastic housing (W x H x D):160mm x 82mm x 130mmLED indication:10mm high, greenAdjustment:min. 10 L/h up to max 250 L/hPower supply:230V / 50Hz, 16ABreaking capacity:16A/230V for consumer load, 1A/230V for magnetic valve
Cooling/heating bath circulator CBC visc lite
Designed for combination with the IKA ROTAVISC viscometers and covers a wide temperature range.A second beaker (600 ml) can be pre-tempered during the measurementOptimised water flow management in the insulated bath for fast and precise temperature control.Equipped with environmentally friendly natural refrigerant R290External pump connection for heating standard vessels according to DIN for absolute viscosity definition with ELVAS spindles or double-walled beakersEasy to maintain thanks to easily removable and therefore easy-to-clean air filters