Benchtop shaking incubator Genie Temp-Shaker 300, with adhesive mat
For shaking and incubation of samples. The incubation chamber can be opened from 3 sides and tilted to the side to load the platform or take samples.Removable incubation chamberVery good temperature distributionMinimum temperature loss when opening the chamberThe maximum working temperature of 75 °C is reached in 20 minutesTransparent incubation chamberFlat platform with adhesive rubber mat that is perfect for use with open containers. Patented material is naturally adhesive. The adhesive properties can be renewed by rinsing.
Benchtop shaking incubator Genie Temp-Shaker 300, with flask clamp
For shaking and incubation of samples. The incubation chamber can be opened from 3 sides and tilted to the side to load the platform or take samples.Removable incubation chamberVery good temperature distributionMinimum temperature loss when opening the chamberThe maximum working temperature of 75 °C is reached in 20 minutesTransparent incubation chamberPlatform for holding flasks or beakers of various sizes.
Benchtop shaking incubator Genie Temp-Shaker 300, with ratcheting clamp
For shaking and incubation of samples. The incubation chamber can be opened from 3 sides and tilted to the side to load the platform or take samples.Removable incubation chamberVery good temperature distributionMinimum temperature loss when opening the chamberThe maximum working temperature of 75 °C is reached in 20 minutesTransparent incubation chamberThe universal ratcheting clamp offers the option of using containers of different sizes and shapes or large volumes on a single platform.
Block Heaters, analogue and digital, BH-200 series
choice of either analogue or digital modelsdigital models available with either 130 or 200 °C maximum temperaturethree block model for extra capacitydual control models have two blocks with independent temperature controluniform and stable block temperaturesDesigned for the precise heating of test-tubes, microcentrifuge tubes, cuvettes and microplates.Range compromises an economical analogue model with easy to use, dial setting and advanced digital models with bright, easy to read, LED display which facilitates setting of the required temperature and also accurate monitoring of the actual temperature.Excellent temperature stability and uniformity is maintained via sensitive, microprocessor control.Heats to 100°C in <12 mins.Supplied complete with block extraction tool but without aluminium blocks which must be ordered separately.With BioCote, silver-based, antimicrobial protection.SpecificationsTemperature stability at 37°C:± 0.1°CUniformity within block at 37°C:± 0.1°CUniformity within block at 130°C:± 1°CElectrical supply:230V 50Hz Number of blocks: Temperature range : Display type: Display resolution: Dimensions (W x D x H) mm: Net weight: Heater power:BH200-2 // BH-200D-2 // BH-200D-2-HT 2 Amb.+8°C to +130°C // Amb.+8°C to +130°C // Amb.+8°C to +200°C Calibrated knob // LED // LED 10°C // 0,1°C // 0,1°C 235 x 280 x 115mm 2.1kg // 2.3kg // 2.3kg 300W Number of blocks: Temperature range: Display type: Display resolution: Dimensions (W x D x H) mm: Net weight: Heater power:BH-200D-3 // BH-200D-3-HT 3 Amb.+8°C to +130°C // Amb.+8°C to +200°C LED 0,1°C 310 x 280 x 115mm 3.2kg 450W Number of blocks: Temperature range: Display type: Display resolution: Dimensions (W x D x H) mm: Net weight: Heater power:BH-200DC-2 // BH-200DC-2-HT 2 (independent control) Amb.+8°C to +130°C // +50°C to +200°C LED 0,1°C 310 x 280 x 115mm 2.9kg 300W
Block thermostat CH3-150 Combitherm-2
Block thermostat with cooling and heating function and with 2 independent modules for interchangeable blocks, combined in a single unit. Control panel is divided in two parts for separate control of cooling and heating blocks.Digital temperature control for optimum precisionDigital timer with sound alarmUser adjustable programs for temperature and time: 16 heating programs and 16 cooling programsTemperature Calibration FunctionWith protective lidSpecificationsTemperature range heating / cooling:25 ... 150 °C / -3 ... 20 °CTemperature control range heating / cooling:ambient +5 ... 150 °C / ambient -23 ... ambient +5 °CTemperature uniformity: Temperature accuracy:±0.1 °C 0.1 °CTimer:1 min ... 99 h 59 minDimensions (W x D x H):295 x 285 x 220 mmWeight:5.6 kgPower supply:230 V, 50/60 Hz
Block thermostats BT5D
The block thermostat BT5D is suitable for high temperature applications where the use of a bath is not desired. It allows temperature control without fluids and thus reduces the risk of contamination.Digital controllerTimer or continuous operationLED temperature displayEasy, interactive user interfaceAdjustable over-temperature cut-outRaised feet to protect the work surface from high temperaturesTemperature range:Amb. + 10 °C ... 400 °CTemperature stability:±0.5 °C (up to 300 °C)Temperature uniformity:±1 %Timer:1 ... 9999 minDimensions (W x D x H):205 x 420 x 145 mmWeight:7.5 kgPower rating:750 WPower supply:230 V, 50/60 Hz
Block thermostats PCH-1 / PCH-2 / PCH-3
Personal benchtop cooling/heating dry block for microcentrifuge tubes. The ingenious block construction, combined with the powerful Peltier module, produces very rapid cooling and heating.Temperature range:-10 to +100°CHeat up, amb. to 100°C:15 minCool down, 100°C to amb.:15 minCool down, amb. to -10°C:21 min
Block thermostats, QBD, QBH series, accessory covers
Not required with QDP-FL mictrotiter blocks
Block thermostats,QBD and QBH series
For controlled dry heating of test tubes, microplates and Eppendorf tubes in interchangeable aluminium blocks. The following models are available:Choose from 3 digital systems with 1, 2 or 4 interchangeable blocks (QBD models) and 1 digital high-temperature system (QBH2) with 2 blocksFast heat-up time and in-block temperature sensing capability using external sensor probe. Please order Cat. No. 6.228 714 separately.Built-in timer, programmable delayed start and RS232 output for data monitoringIncludes block removal toolRequires but does not include interchangeable QB-series blocksSpecificationsTemperature range:ambient 5 to 130 °C, QBH2: ambient 5 to 200 °CStability at 37 °C: Uniformity±0.1 °Cwithin the block at 37 °C: across similar blocks at 37 °C:±0.1 °C ±0.2 °CSupply requirements:230 V, 50/60 Hz, single phase
BlockThermostats TH 21 / TK 23
The Block Thermostats are used for tempering of solutions in closed reaction tubes and plates. They stand out due to their high temperature accuracy as well as their various fields of application thanks to over 30 different exchangeable blocks.Specifications Thermostats:HeatingBlock TH 21 // Heating/CoolingBlock TK 23Temperature operation range:Amb. +3°C to +130°C // Amb. -16°C to +90°CTemperature adjustable range:0°C to +137°C // -10°C to +105°CAccuracy/ resolution:±0.1°C / 0.1°C // ±0.3°C / 0.1°CMax. heating time:9.5°C / min // 4°C / minMax. cooling time:-- // 7°C / minDimensions (W x D x H):220 x 330 x 109mm // 220 x 330 x 144mmCapacity:2 exchangeable blocks (not included)Weight (with block / blocks):approx. 3.5kg // approx. 7.5kgElectrical heating/ cooling power:350W // 130WSupply requirements:230V, 50HzEasy Control // Smart Control:Timer 19h 59min // 30 program stepsFurther power connectors on request.
Bottom grid for Water baths WTB
Bottom grid reversible for 2 heights (30 mm and 60 mm)
Built-in hotplates series EB-C, CERAN®
The EB-C series is designed for table installation, and is supplied with installation suspension. The separate controller housing can be installed directly into the table frame. Electrical connections between controller housing and hotplate are protected by a flexible metal hose. Conductor length between controller housing and hotplate 0.65 m.Heated area marked on CERAN® heating surfaceNo heat loss to table top and heating surface edges
Calibration certificate Extension for Cooling incubators KB ECO
Extension of the temperature measurement in the centre of the cooling incubator by an additional test temperature.
Calibration certificates Temperature for Cooling incubators KB ECO
Temperature measurement in the cooling incubator at a specific test temperature.
Cell Culture Flasks EasyFlask™, non-treated, PS/HDPE, pyrogen-free
Non-treated, sterile flasks for suspension cell cultures. White caps for easy identification. Pyrogen-free.Material flasks: PolystyreneMaterial caps: HDPE
Cell Culture Flasks TripleFlask™, non-treated, PS/HDPE, pyrogen-free
Non-treated, sterile flasks for suspension cell cultures. White caps for easy identification. Pyrogen-free.Material flasks: PolystyreneMaterial caps: HDPE
Cell Locker™ chambers for CO2 inkubator Heracell™ VIOS™ 160i
Transparent. Each Cell Locker™ holds 9 each T-75 cell culture flasks, 20 each 6-well plates, or 24 each 96-well plates. The Cell Locker™ can be manually disinfected or can be autoclaved a maximum of 12 times.Tapered box for easy installation into incubatorEasy and secure one handed latch and pullNon-slick sliding tray with tip protectionRemovable cover for protected transportMembrane filter (0.2 µm)