Hotplates HP-300-BS/WS//HP-300-BC/WC, digital
Hotplates with accurate temperature control.Spill-resistant front control panel with chemically toughened glass for extra resilienceHot surface warning light flashes when plate temperature is above 50 °CDurable chip-resistant aluminum top plate offers excellent heat transmission, rapid heating, and oven temperature distributionCeramic top plate is chemical resistant and easy to clean, plus the white surface ensures good visibility of colour changesWith an integral fixing point for a retort rodWith BioCote, silver-based, antimicrobial protection
Hotplates HP-400
Hotplates with accurate temperature control. Durable chip-resistant aluminum top plate offers excellent heat transmission for rapid heating and even temperature distributionSpill-resistant front control panel with chemically toughened glass for extra resilienceThe set and actual temperature is shown on the displayMains-independent warning light for surface temperatures above 50 °CIntegrated fitting for a retort rodCoated with BioCote® antimicrobial protectionScope of supply: Hotplate, PTFE-coated temperature sensor
Hotplates SuperNuova™+
Hotplates SuperNuova™+ are characterised by reliable performance, safety, and simple operation.Temperature setting can be savedHot Top warning light is activated when the hot plate surface is above 50 °CEasy-to-read LED displayRaised display design protects electronics from spills
Hotplates with power control and mains cable
For continuous operation. Electric hotplates with stepless perfomance control. With aluminium alloy hotplate. Excellent uniform temperature distribution over entire heating surface. Stainless steel housing, with painted central section. Height-adjustable feet. Mains cable approximately 1.7 m.
Hotplates with power control and permanent connection
For continuous operation. Electric hotplates with stepless perfomance control. With aluminium alloy hotplate. Excellent uniform temperature distribution over entire heating surface. Stainless steel housing, with painted central section. Height-adjustable feet.
Hotplates with power control, thermostatic controller and mains cable
For continuous operation. Electric hotplates with thermostatic temperature control and stepless performance control. With aluminium alloy hotplate. Excellent uniform temperature distribution over entire heating surface. Stainless steel housing, with painted central section. Height-adjustable feet. Mains cable approximately 1.7 m.
Hotplates with power control, thermostatic controller and permanent connection
For continuous operation. Electric hotplates with thermostatic temperature control and stepless performance control. With aluminium alloy hotplate. Excellent uniform temperature distribution over entire heating surface. Stainless steel housing, with painted central section. Height-adjustable feet.
Hotplates, analogue, HP-200-C
With glass ceramic top plate. The surface is easy to clean and allows high plate temperatures for faster heating.Flashing "Hot" warning light for temperature above 50 °C, mains independentAccurate temperature control with LED setting scaleCompact, space saving designIntegral fitting for a retort rodCan be used with TC-200D digital temperature controllerWith BioCote®, silver-based, antimicrobial protection.
Hotplates, analogue, HP-200-S
Plate made of robust aluminium-silicon alloy with a thin ceramic coating for added chemical resistance.Flashing "Hot" warning light for temperature above 50 °C, mains independentAccurate temperature control with LED setting scaleCompact, space saving designIntegral fitting for a retort rodCan be used with TC-200D digital temperature controllerWith BioCote®, silver-based, antimicrobial protection.
Hotplates, digital HP-200D-S
Maximum temperature 300 °C. Digital setting and control of plate temperature with 1 °C resolution and cast aluminium/silicon alloy top plate. The 300 x 300 mm top plate model has a retort rod mounting at the rear of the housing. With BioCote, silver-based, antimicrobial protection.
Humidity Chambers HCP
The Memmert humidity chamber HCP - This climate chamber offers a full range of comfort, reliability and safety. This humidity chamber is ideally suited for environmental testing, environmental simulation, accelerated service life tests and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.The active humidity control is the guarantee for ideal homogeneity of temperature and humidity as well as for short recovery times after opening the door. In combination with heating on all six sides, including heated inner glass door, it also minimises vaporisation in the interior and thus the risk of condensed water dripping onto the test object. An aluminium thermal conductive layer supports optimum temperature distribution and serves as a heat accumulator in case of a temporary power failure.Model variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Hybridisation bottles
For use with Stuart hybridisation ovens. Heavy wall borosilicate glass. Suitable for autoclaving up to 140 °C.
ICH light modules for cooling incubators KB PRO and constant climate chambers KBF/KBF PRO
ICH-Q1B light modules for ICH photostability tests.
Incubating Heavy Duty Orbital Shakers
Incubating Heavy Duty Orbital Shakers offer exceptional temperature uniformity and are designed for a variety of shaking and incubating applications.Opti-Flow Forced ventilation system utilizes twin induction and a single large fanRepeatable results, the exclusive Accu-Drive shaking system ensures speed accuracyConsisting shaking motion throughout the entire speed rangeType ISHD23HDG: large enough to hold 2 x 6 L Erlenmeyer flasks with optional clamps and platform
Incubator BF Classic.Line
Incubators for long-term stable continuous operation. Ideal for gentle incubation of organisms and other incubation tasks.APT.line™ preheating chamber technologySafe and reproducible results even with high batch throughputs in long-term operationDisinfection routine at 100 °CAdjustable exhaust air flapController with timer functionsInner door made of tempered safety glass2 chrome-plated racksClass 3.1 independent temperature safety device (DIN 12880) with visual temperature alarmComputer interface RS 422Incubators with forced convectionAdjustable fan speedTemperature stability ±0.1 K (at 37 °C)
Incubator INC 125 F digital
The incubator is designed for precise temperature control during microbiological applications up to 100 °C. INC 125 F digital is a forced air incubator with powerful pre-heat air inlet to ensure fast, stable and uniform tempering performance.Excellent temperature stability and temperature uniformity of +/-0.3 °CAvailability of counter, timer and timer auto modesElectronically adjustable ventilation flap and fan speed from 0% to 100%Decontamination mode availableEasy to clean chamber made of corrosion-resistant AISI 304 materialExcellent chamber insulationUp to 2 units (incubator shaker or incubator) stackable (accessories required)Additional inner glass door that prevents dissipation of heat when the outer door is opened to observe the samplesLockable door (optional accessory)Door hinge changeable upon request
Incubator INC-200, analogue
The incubator is suitable for a wide range of applications, such as plant propagation, humidity testing, simulation of climatic conditions, and corrosion testing. Forced air circulation and electronic temperature control ensure accurate temperature conditions.Clear acrylic construction offers full view of the samplesHinged front door panel facilitates sample access2 feed-throughs (Ø 10 mm) on the side wallsTemperature safety cut-out is set at 72 ºCWith BioCote, silver-based, antimicrobial protection on the metal surfaces.With analogue temperature control
Incubator INC-200D, digital
The incubator is suitable for a wide range of applications, such as plant propagation, humidity testing, simulation of climatic conditions, and corrosion testing. Forced air circulation and electronic temperature control ensure accurate temperature conditions.Clear acrylic construction offers full view of the samplesHinged front door panel facilitates sample access2 feed-throughs (Ø 10 mm) on the side wallsTemperature safety cut-out is set at 72 ºCWith BioCote, silver-based, antimicrobial protection on the metal surfaces.With digital temperature controlLCD display
Incubator Lovibond® DI 10
For fast and reliable incubation of dipslides in the laboratory or in the field directly during sampling.Low voltage, in-car operation possibleHolds up to 12 dipslides or 10 quanti-discsExcellent temperature stabilityProgrammable incubation period settingLCD Temperature display with up/down push button controlRapid heating times for fast testingExternal status LEDsScope of supply: Incubator incl. external 12 V universal power supply, set of leads (UK, EU, US), 12 V in-car power adapter
Incubator shaker INC 125 FS digital
INC 125 FS digital is the first incubator shaker with a patented removable shaker platform that supports both static and shaking incubation. When the shaker platform is taken out, the device can be used as normal incubator.Shaking platform with universal design to directly attach fixing clips or adhesive matAutomatic recognition of shaker platformStops shaking automatically when door is openedShaking and tempering function can run independentlyAvailability of counter, timer and timer auto modesAccommodates up to 6 wire grid trays (without shaker platform)Decontamination mode availableChamber made of corrosion-resistant AISI 304 materialExcellent chamber insulationEasy to clean due to removable shaking platform and drip tray underneathDoor with triple layer glass window to observe samplesUp to 2 units (incubator shaker or incubator) stackable (accessories required)Door hinge changeable upon requestInstallation and operation qualification (IQ/OQ) available upon request
Incubator Shaker KS4000i control
Innovative incubator shaker design allowing unattended operation in a temperature-controlled environment.large LED display for speed and time settingscontrols with antimicrobial coating for reduction of bacteriaintegrated PID temperature control (two Pt1000 temperature sensors can be used)socket in the work area for connection of an additional temperature sensor e.g. PT1000.60 (included in delivery)electronic temperature and speed controlelectronic timer switch: 0 to 999h (set by the minute or by the hour)KS 4000 ic with built-in cooler for connection to an external cooling unit e.g. RC 2 basicunit switches off automatically if disturbedunit stops automatically when hood is liftedcollecting tray for spillages with draining tube at rear of unitall functions can be controlled and documented using labworldsoft® softwareattachments not included - Please order accessories as required
Incubator, mechanical control, B 28 series
Robust, small, space-saving unit with mechanical controller and adjustable ventilation for accurate and reliable incubation.Temperature range: 30 °C to 70 °CInner glass door
Incubators BD Avantgarde.Line
Incubators with homogeneous temperature distribution ensure the best results for a wide range of incubation tasks.High temperature accuracy thanks to APT.line™ technology100 °C disinfection routineHigh process reliabilityController with LCD displayElectromechanical control of the exhaust air flapInner door made of tempered safety glass2 chrome-plated racksChambers up to 115 l are stackableClass 3.1 integrated independent temperature safety device (DIN 12880) with visual alarmErgonomic handle designUSB connection for data recordingIncubators with natural convection
Incubators BD Classic.Line
Incubators for long-term stable continuous operation. Ideal for gentle incubation of organisms and other incubation tasks.APT.line™ preheating chamber technologySafe and reproducible results even with high batch throughputs in long-term operationDisinfection routine at 100 °CAdjustable exhaust air flapController with timer functionsInner door made of tempered safety glass2 chrome-plated racksClass 3.1 independent temperature safety device (DIN 12880) with visual temperature alarmComputer interface RS 422Incubators with natural convection