Glass door for Universal ovens
Full-sight glass door (4-layer insulating glass) temperature-range up to max. 250°C, for UN, UNplus, UF, UFplus series.Full-sight glass door (4-layer insulating glass borsilicat) temperature-range up to max. 300°C upon request
Glass fibre-insulated heating cables series KM-HC-G
LabHEAT®-Heating cables. No protection against ingress of water; glass fibre insulation without protective braiding; outer diameters from 3.5 to 4.5 mm; min. bending radius > 5 mm; max. heating element temperature 450 °C; preterminated with 2 x 1.5 m cold end.
Glass fibre-insulated heating tapes series KM-HT-BS30
LabHEAT®-Heating tapes. Very flexible. No protection against ingress of water. With inner metal protective braiding and glass fibre insulation. With power cable (1.0 m) for fixed connection.
Glass Oven B-585 Drying
For gentle drying of small and medium sized samples and removal of residual solvents in the temperature range up to 300 °C. The process can be accelerated by optionally applying vacuum. An adjustable angle of up to 90° allows larger sample volumes.High yield by gentle sample treatmentEasy operation with multiple pre-settingsFull control due to optimal visibility of the samplesCompact designSpecificationsDrying volume:100 ... 250 mlWarm-up time:approx. 10 min. (from 20 to 300 °C)Temperature range:40 ... 300 °CTemperature precision:± 5 °CDimensions (W x D x H):410 x 300 x 300 mmWeight:9.5 kgPower consumption:450 WPower supply:100 ... 230 V, 50/60 Hz
Grid shelves for incubators BD-S and drying and heating chambers ED-S / FD-S
Grid shelf incl. shelf support.
Heating bath HB 1500
The heating bath HB 1500 is developed for varied tasks. The bath can be filled with water, oil or sand. Modern microprocessors control the temperature. With measuring circuit monitoring for over- and under-temperature, sensor and line short-circuit, as well as sensor and line breakage.Microprocessor controller with 4-digits 7-segment display, 10 mm high, greenFreely configurableSelf-optimising temperature controlMeasuring and control range up to 260 °CSetting of heating power from 1 to 99 %Overtemperature switch-off >10 K + setpointWear-free internal temperature sensor at the bottom of the potOn-Off switch 2-pole, green, illuminatedSwitchable to external sensorMaterial bath/housing stainless steel, front and rear anodised aluminium
Heating bath HB 1500-S
The heating bath HB 1500-S is developed for varied tasks. The bath can be filled with water, oil or sand. The appliance is equipped with 2 temperature controllers with microprocessor. The upper temperature controller serves as a safety temperature limiter. If the safety temperature is exceeded, the heating is switched off at all poles. The temperature is measured via an internal temperature sensor at the bottom of the pot.Microprocessor controller with 4-digit 7-segment display, 10 mm high, greenFreely configurableSelf-optimising temperature controlMeasuring and control range up to 260 °CSetting of heating power from 2 to 99 %Switchable to external sensorMaterial bath/housing stainless steel, front and rear anodised aluminium
Heating Bath HB Digital
Compact and ergonomic heating safety bath for all tempering media.Ergonomic handlesKey button to lock heating bath temperatureClear, black-and-white displayPermanent set-point/actual temperature display3 different safety operating modesUSB interface
Heating Bath HB eco
Compact and ergonomic heating safety bath.Ergonomic handlesClear, black-and-white displayAlternating set-point/actual temperature displayUSB interface
Heating bath HBR 4 control
The heating bath is noted for:Cylindrical bath shapeHeating elements integrated into the bath baseHeat transfer media can be low-viscous oil (50 mPas) or waterTwo carry handlesInfinitely variable safety temperature limiter according to DIN 12877Double-jacketed mantle protection against burnsDigital display for target, actual and safety temperatures as well as speedIntegrated magnetic stirrer drive to circulate the tempering fluid, allowing for better heat distribution in the bathRS 232 interface
Heating bath liquid, BUDDE
Use:BUDDE heating bath liquid can be used continuously as a heating medium up to approx. 170 °C. Higher temperatures (below flash point) are possible, but will result in rapid darkening. The low pour point allows the bath liquid also to be used as a cooling medium. Mixtures with 10 % to 30 % water achieve best results.The crucial advantages of BUDDE heating bath liquid compared tothe oils or other organic liquid mainly used are:accidental spillage of water into the bath does not lead to dangerous spitting at temperatures over 100 °C, as the water dissolves in the heating bath liquid and subsequently evaporates safelyBUDDE heating bath liquid can easily be rinsed away with water which eases cleaning of laboratory equipment, e.g. distillation flasks, and also bench or floor if the bath liquid is accidentally spilled.BUDDE heating bath liquid does not foam when mixed with water.Viscosity on addition of water:BUDDE heating bath liquid is quite viscous at ambient or low temperatures, and therefore sometimes difficult to dispense. The addition of 10-20 % water reduces the viscosity and enables easier handling. If the mixture is then heated to 100 °C, the water evaporates without boiling. Further heating is only shortly delayed by this. Before next heating, water can be added again.Water solubility: BUDDE heating bath liquid can be mixed with water in any ratio. The hardness of the water has no effect on the bath liquid.
Heating block set for digital dry bath LLG-uniBLOCKTHERM
Heating block with aluminium beads as an alternative to exchangeable blocks with borings.The aluminium beads ensure high thermal conductivity. Various types of vessels, such as tubes, bottles, and microtitre plates can be individually assembled and simultaneously tempered in the dry bath. Easy to remove from the LLG-uniBLOCKTHERM thanks to two handles. The heating block holds a max. capacity of 700 ml.Scope of supply: Heating block, aluminium beads (1 kg)
Heating mantles Electrothermal® MHM-200
Heating mantle has a "V"-shaped design for large, pear-shaped and round-bottom flasks. The bottom opening allows 60° funnels of various diameters to be accommodated. Coiled heating element provides optimal heat transfer. Control heat throughout the mantle using three separate electrical circuits (top, middle, and bottom), each controlled with its own dial switch.Cool-to-the-touch design with powder-coated aluminium casingIndicator lamps for "power on" and "heat on" operationScope of supply: Heating mantle, three sets of integrated support rod clamps, power cords with UK and EU plugs
Heating module for Incubator 1000, Suitable for Heidolph Shakers
Modular system for shaking, mixing and heating with visual reaction control.Compatible shakers are Duomax 1030, Polymax 1040, Titramax 1000, Unimax 1010 and Promax 1020.Heating module with a heating capacity of 300 W allows for quick and gentle temperature adjustments up to 65°CDigital temperature setting of target temperature of 65 °C and separate display for actual temperature (accuracy of ±2°C up to 50°C and ±4°C over 50°C)Low noise blower allows for quick and even temperature distribution throughout the entire enclosureOne incubation system can be used for several shakers, fast conversion possibleTo protect samples from thermal damages this unit features a safety circuit to prevent overheatingUnlimited visual reaction control due to transparent and non-fogging PETG hoods3 hoods options available: A flat hood for small vessels and mictrotiter plates, a high hood for all common medium sized vessels and a high hood XL for larger Erlenmeyer flasks up to 2000 mlThe incubator hoods open instantly and interlock in any positionPlease order hoods separately.
Heating plate RC 2, individually controllable heating plates
Heating plate with two individually controllable positions and intuitive control panel for a variety of general temperature control tasks in the laboratory. The aluminium alloy heating plates ensure high temperature homogeneity and optimum heat transfer over the entire surface. Two illuminated indicators signal when the heating is on. The symbol stays on when the temperature of the plate is above 50 °C, even when the device is switched off. Other safety functions, such as overtemperature protection and safety circuits, protect during daily operation.
Heating plate REC 10 Digital
Heating plate with large ceramic plate for demanding temperature control tasks in the laboratory. An external temperature probe can be connected for precise thermoregulation of the sample. The temperature can be easily set and monitored via the bright and user-friendly digital display. The ceramic plate is resistant to chemicals and scratches, and is easy to clean. A warning symbol indicates when the plate temperature is above 50 °C, even when the device is switched off. Advanced safety functions protect during daily operation.
Heating plate REC 7 Digital
The REC 7 Digital is equipped with a ceramic plate and ensures maximum homogeneity, thermal efficiency and temperature stability. The ceramic plate is resistant to chemicals and scratches, and is easy to clean. An external temperature sensor or the VTF temperature controller can be connected for precise thermoregulation of the sample. The temperature can be set easily using the digital display and the rotary knob. The hot indicator signals when the plate temperature is above 50 °C, even if the heating function is not active.
Heating tapes series KM-HT-201
Silicone insulated heating tape up to 200 °C.WaterproofVery flexibleEasy to cleanSuitable for food productionWithout protective conductor
Heating Tapes Series KM-HT-202
Silicone insulated heating tape up to 200 °C.WaterproofVery flexibleWith metal overbraiding (copper) for good heat transferMetal overbraiding is mechanically and electrically protective (grounded)
Heating tapes, fibre glass, KM-HT-G series
Not moisture-resistant. With fibre glass protective braiding. Max. surface temperature 450 °C. With nickel-plated copper external braiding as protective earth conductor, 1.0 metre long mains connection cable for permanent connection to a fused outlet. Power loading approximately 200 W/m.
HeatingThermoMixer MHR 13
Extremely short heating rate.Highest accuracy: max. 0.1°C deviation.Specifications:Temperature operation range:Amb. +3°C to +130°CTemperature adjustable range:0°C to +137°CAccuracy/ resolution:±0.1°C / 0.1°CMax. heating time:11.5°C / minShaking frequency MHR 11: Shaking frequency MHR 13:80rpm to 1500rpm 200rpm to 1500rpmOrbit:3mm orbitalDimensions (W x D x H):220 x 330 x 109mmCapacity:1 exchangeable block (not included)Weight:6.5kgElectrical heating power:200WSupply requirements:230V, 50HzEasy Control MHR 11:Timer 19h 59min, slider for shaking frequencySmart Control MHR 13:30 program steps, short mix, interval shakingFurther power connectors on request.