Pure and Ultrapure water purification system Barnstead™ Smart2Pure™ Pro UV/UF, ASTM I and II
The compact system converts tap water into ultrapure water (ASTM Type I) and pure water (ASTM Type II) via the filtration cartridge and UV/UF units. The integrated recirculation pump and the sterile ventilation filter protect against contamination and ensure tank water quality.Mounting on the laboratory bench or on the wallLeak detectorWarning message when consumable change is necessaryEasy cleaning due to bottom outlet and large openingTiltable display with simplified user interfaceCode-protected system parametersKit contains a 0.1 µm end filterHand dispenser with 3 m cord optionally available.Ultrapure water specifications ASTM Type 1Flow rate: Conductivity:1.0 l/min 0.055 µS/cmResistance at 25 °C: TOC value:18.2 MΩ x cm 1 ... 5 ppbEndotioxins: RNase:0.001 EU/ml 0.003 ng/mlDNase: Bacterial content:0.4 pg/µl 0.01 CFU/mlParticles 0.2 µm/ml:1Pure water specifications ASTM Typpe IIPermeate flow rate: Conductivity:16 l/h 0.067 ... 0.1 µS/cmResistance at 25 °C: Retention rate bacteria, particles:1 ... 10 MΩ x cm 99 %SpecificationsOperating pressure: Interface:1 ... 6 bar RS232Feedwater connector: Dimensions (W x D X H):3/4" NPT and 1/2" NPT 305 x 300 x 545 mmPower consumption: Power supply:0.12 kW 100 ... 240 VAC, 50 / 60 Hz
Pure and Ultrapure water purification system Barnstead™ Smart2Pure™, ASTM I and II
The Thermo Scientific Barnstead Smart2Pure system is a compact system which converts tap water into ASTM type I and II water. The Smart2Pure models 3 and 6 are featured with an built-in 6 l tank to store the type II water. The Smart2Pure 12 offers the choice between a 30 l or 60 l tank depending on storage requirements. A variety of innovative expansion options, such as UV-lamp with wavelenghts 185/254 nm and a backwashable ultrafilter with a flow rate up to 0.6 l/min, ensure optimal supply for all analytical and life science applications. A swiveling display and the easy filter change make the Smart2Pure the perfect laboratory water unit for the small demand.Product features:Easy and economical change of consumables due to separately exchangeable high-tech reprocessing cartrigesGuaranteed pure water quality: Recirculation pump and sterile ventilation filter protect from contamination and ensure a tank water quality from 10 up to 15 MW x cmAdditional pressure outlet on the ultrapure water tank for supplying downstream devices (e.g. autoclaves, analyser) or connection of a flexible dispenserThe scope of supply includes all necessary materials for the first-time operation (for Smart2Pure12 a storage tank must be supplemented)Optional hand dispenser with 3 m flexible circulation line for remote dispensing of the water. The kit contains a 0.2 µm end filterUltrapure water specifications ASTM Type IFlow rate: Flow rate UF-models:1.0 l/min 0.6 l/minConductivity:0.055 µS/cmResistance at 25°C:18.2 MΩxcmTOC value: TOC values UV-models:10 ppb 1 to 5ppbEndotoxins UF-models: Bacterial content: Particles 0.2µM/ml:0.005 EU/ml 1cfu/ml 1Pure water specifications ASTM Type IIPermeate flow rate at 15°C: Smart2Pure 3: Smart2Pure 6: Smart2Pure 12: 3 l/h 6 l/h 12 l/hPermeate conductivity:0.067 to 0.1µS/cmPermeate resistance at 25°C:15 to 10 MΩxcmSpecificationsPower supply:90-240 V, 50/60 HzDimensions (W x D x H):305 x 400 x 545 mmFeedwater connector:¾ inchDrain connection:¼ inchWith UF = ultrafiltration, UV = UV photo-oxidation 185/254nm, UF / UV = Ultra Filtration and UV photo-oxidation 185/254 nm
Pure and ultrapure water system Aquanex™, with external 30 l tank
The Thermo Scientific™ Aquanex™ is a system that produces ultrapure water (ASTM Type I) and pure water (ASTM Type II) from tap water for analytical and life science applications. Consumables can be replaced quickly and easily by removing the magnetic front panel, new cartridges are automatically recognized by the device. The device has 3 operating modes (water saving mode, pack saving mode, dynamic mode) that reduce water consumption or maximize the life of consumables.Ergonomic dispenser with touchscreen displayQuick connect fixtures facilitate installationVolumetric and manual dispensing possibleTwo-point calibration for improved accuracy in volumetric dispensingAdjustment of water flow at low dispensing volumes reduces splashingSecure log-in functionSeamless event logging, monitoring, and reportingExport of event logs via USB interface in CSV or PDF formatAutomatic leak detection and system shutoffScope of supply: Pure and ultrapure water system, external 30 l tank, Aquanex™ Touch Smart dispenser with stand, DI cartridge set, UV/UF module, final filter (0.1 µm)Ultrapure water ASTM Type I:Flow rate:≥1.5 l/minResistance at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria:0.001 CFU/mlPure water ASTM Type II:Permeate flow rate:16 ± 20 % l/hrResistance at 25 °C:1 ... 10 MΩ x cmConductivity at 25 °C:0.1 ... 1.0 µS/cm
Pure and ultrapure water system Aquanex™, with external 30 l tank and pretreatment system Barnstead™
The Thermo Scientific™ Aquanex™ is a system that produces ultrapure water (ASTM Type I) and pure water (ASTM Type II) from tap water for analytical and life science applications. Consumables can be replaced quickly and easily by removing the magnetic front panel, new cartridges are automatically recognized by the device. The device has 3 operating modes (water saving mode, pack saving mode, dynamic mode) that reduce water consumption or maximize the life of consumables.Ergonomic dispenser with touchscreen displayQuick connect fixtures facilitate installationVolumetric and manual dispensing possibleTwo-point calibration for improved accuracy in volumetric dispensingAdjustment of water flow at low dispensing volumes reduces splashingSecure log-in functionSeamless event logging, monitoring, and reportingExport of event logs via USB interface in CSV or PDF formatAutomatic leak detection and system shutoffScope of supply: Pure and ultrapure water system, external 30 l tank, Aquanex™ Touch Smart dispenser with stand, DI cartridge set, UV/UF module, final filter (0.1 µm), pretreatment system Barnstead™Ultrapure water ASTM Type I:Flow rate:≥1.5 l/minResistance at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria:0.001 CFU/mlPure water ASTM Type II:Permeate flow rate:16 ± 20 % l/hrResistance at 25 °C:1 ... 10 MΩ x cmConductivity at 25 °C:0.1 ... 1.0 µS/cm
Pure and ultrapure water system Aquanex™, with integrated 10 l tank
The Thermo Scientific™ Aquanex™ is a system that produces ultrapure water (ASTM Type I) and pure water (ASTM Type II) from tap water for analytical and life science applications. Consumables can be replaced quickly and easily by removing the magnetic front panel, new cartridges are automatically recognized by the device. The device has 3 operating modes (water saving mode, pack saving mode, dynamic mode) that reduce water consumption or maximize the life of consumables.Ergonomic dispenser with touchscreen displayQuick connect fixtures facilitate installationVolumetric and manual dispensing possibleTwo-point calibration for improved accuracy in volumetric dispensingAdjustment of water flow at low dispensing volumes reduces splashingSecure log-in functionSeamless event logging, monitoring, and reportingExport of event logs via USB interface in CSV or PDF formatAutomatic leak detection and system shutoffScope of supply: Pure and ultrapure water system, integrated 10 l tank, Aquanex™ Touch Smart dispenser with stand, DI cartridge set, UV/UF module, final filter (0.1 µm)Ultrapure water ASTM Type I:Flow rate:≥2.0 l/minResistance at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria:0.001 CFU/mlPure water ASTM Type II:Permeate flow rate:16 ± 20 % l/hrResistance at 25 °C:1 ... 10 MΩ x cmConductivity at 25 °C:0.1 ... 1.0 µS/cm
Pure and ultrapure water system Aquanex™, with integrated 10 l tank and pretreatment system Barnstead™
The Thermo Scientific™ Aquanex™ is a system that produces ultrapure water (ASTM Type I) and pure water (ASTM Type II) from tap water for analytical and life science applications. Consumables can be replaced quickly and easily by removing the magnetic front panel, new cartridges are automatically recognized by the device. The device has 3 operating modes (water saving mode, pack saving mode, dynamic mode) that reduce water consumption or maximize the life of consumables.Ergonomic dispenser with touchscreen displayQuick connect fixtures facilitate installationVolumetric and manual dispensing possibleTwo-point calibration for improved accuracy in volumetric dispensingAdjustment of water flow at low dispensing volumes reduces splashingSecure log-in functionSeamless event logging, monitoring, and reportingExport of event logs via USB interface in CSV or PDF formatAutomatic leak detection and system shutoffScope of supply: Pure and ultrapure water system, integrated 10 l tank, Aquanex™ Touch Smart dispenser with stand, DI cartridge set, UV/UF module, final filter (0.1 µm), pretreatment system Barnstead™Ultrapure water ASTM Type I:Flow rate:≥2.0 l/minResistance at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria:0.001 CFU/mlPure water ASTM Type II:Permeate flow rate:16 ± 20 % l/hrResistance at 25 °C:1 ... 10 MΩ x cmConductivity at 25 °C:0.1 ... 1.0 µS/cm
Pure and ultrapure water system Barnstead™ LabTower™ EDI, ASTM I and II
The direct route from tap water to pure water (> 1 MOhm) and ultrapure water (18.2 MOhm).Laboratory water supply for a requirement of up to 200 litres/day. The Thermo Scientific Barnstead LabTower EDI is a modular ultrapure water system specially developed for the functional and economical production of pure and ultrapure water. By combining various treatment technologies such as pre-treatment, reverse osmosis, electrodeionisation, ultrapure water module and UV lamp, the LabTower EDI produces ultrapure water that exceeds even the highest quality standards such as ASTM I, CAP, ISO 3696, CLSI and aqua purificata. A state-of-the-art microprocessor control system, the 100 litre pure water tank with residual emptying, a pressure pump and tank recirculation are already included as standard. Mounted on castors, the compact and stylish LabTower EDI is the ideal pure and ultrapure water supply for any laboratory. All LabTower EDI systems are supplied for immediate use with: Ultrapure water cartridge, RO membrane, RO pre-treatment filter (5 µm filter and water hardness stabiliser), EDI module, UV lamp, 0.2 µm final filter and pressure reducer.High-performance reverse osmosis module combined with an EDI module and an ultrapure water cartridgeType 1 ultrapure water withdrawal via the dispenser with final filter directly on the systemType 2 pure water can be drawn from the integrated 100-litre tank and is ideal for laboratory equipment such as autoclaves or dishwashersThe tank is equipped with a tank volume display in per cent, a conical bottom drain for 100% residual emptying and a quality recirculation via UV lamp to ensure the tank water quality. Optional expansion options such as a sterile overflow, sterile aeration + CO2 adsorber, UV immersion tube system with 254 nm protect against decontamination and bacterial growthIndividual adjustment of the volume stored in the tank via the control unitLaboratory-grade monitoring and documentation is made possible not only by our high-precision, temperature-compensated conductivity monitoring in accordance with USP 30 (645) with exact temperature display, but also by a potential-free contact and an RS-232 interface with connection option for an external data printer - validation and qualification documents are optionally availableChoice of two systems with a capacity of 15 or 30 litres per hourOptional manual dispenser with 3 m flexible circulation line for remote dispensing of water. Kit includes a 0.2 µm final filter
Pure water purification system Barnstead™ Pacific™ RO
The Thermo Scientific Barnstead Pacific RO water purification systems are modularly designed laboratory reverse osmosis system for the production of 20L to 200L pure water from tap water. Applications include routine laboratory work: lab glassware rinsing, supplying autoclaves, water baths and incubators, preparing an diluting buffers and reagents. A 30L, 60L, or 100L polyethylene reservoir is required to store and dispense the permeate water.Product features:Space-saving design allows system to sit on the laboratory bench or be mounted on the wall. Simple system upgrade accommodates future pure water capacity requirements.Reliable operation: Microprocessor control offers automatic operation with continual monitoring of all important parameters. Required filling level of the reservoir can be customized. Automatic return to operating mode ensures recirculation during periods of standstill.Easy-to-operate clear display: Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing. Status of current operating mode clearly indicates "production", "stand-by", "cleaning" modes. Reservoir fill-level shown as %.Integrated feed water monitoring: Good quality feed water is a prerequisite for high purity water and extends cartridge service life.GLP-compliant documentation: Real-time clock records system errors and faults. Ongoing data storage collects four weeks information displayed in clear text. Operating system is code-protected to prevent unauthorized changes to system settings. RS-232 interface with adjustable sender interval allows for customized timing of data transmission of measured values and faults to a PC or data printer. Cell constant of 0.16cm-1 ensures precise conductivity measurements.Pacific RO pretreatment: Two 10in. (25.4cm) cartridge filter housings with a 5µm prefilter and activated carbon to prevent entry of particles >5µm and high concentrations of free chlorine includes hardness stabilizer cartridge which binds calcium and prevents its precipitation.Worry-free pure water storage: Reservoir are constructed of pigment-free polyethylene. Conical bottom allows for easy cleaning, disinfecting and complete emptying.Optional hand dispenser with flexible circulating line for dispensing water in a distance of up to 3 m. The kit contains a 0,2 µm end filter.Pure water specificationsOperating pressure:2 to 6barRemoval bacteria and particles:99%Removal anorganic components:98%SpecificationsPower supply:90-240 V/50 Hz, rubber connector 1.8mDimensions (W x D x H):372 x 330 x 603mmFeedwater connector:Tubing 1.5m with 8mm o.d. and R¾'' inner threadWastewater connector:¼'' or 8mm o.d., tubing 2m, pressureless drainPower consumption:0.1kW
Pure water purification systems Barnstead™ Pacific™ TII
The Thermo Scientific Pacific Barnstead TII system provides ultrapure water (1 - 10 MOhm) ASTM type II for typical demand up to 200 l/day. By combining different treatment technologies such as pretreatment, reverse osmosis, ion exchangers, adsorption and optional UV lamp, the Pacific TII produces pure water (ASTM type II) that meets the highest quality standards such as ASTM II, CAP, ISO 3696, CLSI and Bi distillate. Pacific TII is suitable for table or wall mounting. Three tank sizes 30 l, 60 l, or 100 l are available to match the range of permeate capacities of 7, 12 and 20 l/h. Upgrading the system and thus increasing the capacity for a growing pure water demand is possible at any time. Ideal for supplying ultrapure water systems, clinical analysers, reagent/dilution preparation and general chemical analysis.Product features:Feed water (e.g. tap water) is pre-cleaned by reverse osmosis membrane. Via the pure water cartridge and optional UV unit the type II water ist temporarily stored in the storage tank. The optional recirculation of the water via the integrated pump ensures constant optimal water qualityFlexible and compact laboratory system for optional mounting on the laboratory bench or with the integrated mounting bracket on the wallSimple and economical change of consumables due to separately exchangeable high-tech cartridgesIn the 4-line display numerous operating parameters, such as limit values, flushing cycles tank volume display in % can be easily set and queriedThe code-protected operating system as well as a high-precision conductivity monitoring in acc. with USP enable documentation acc. with GLP requirementsAdditional pressure booster system on the ultrapure water tank for supplying downstream devices (e.g. autoclaves, dishwasher, analyser)The scope of supply includes all necessary materials for immediate use: Integrated wall bracket, RO membrane, pure water cartridge, pressure reducer and UV lamp (for Pacific TII UV)Optional hand dispenser with flexible circulating line for dispensing water in a distance of up to 3 m. The kit contains a 0.2 µm end filter.Pure water specificationsOperating pressure:2 to 6barTemperature:+2°C to +35°CPermeate conductivity:0.067 to 0.1µS/cm (at 30ppm CO2 in feeding water)Permeate resistance at 25°C:15 to 10MΩ.cmRemoval bacteria, Pyrogens:99%TOC value:30ppbInterface:RS 232SpecificationsPower supply:90-240V/50-60HzDimensions (W x D x H):372 x 330 x 613mmFeedwater connector:Tubing 1.5m with 8mm o.d. and R¾'' inner threadWastewater connector:¼'' or 8mm o.d., tubing 2m, pressureless drainPower Consumption:0.08kW
Pure water system Barnstead™ LabTower™ RO, ASTM II
Laboratory water supply for a requirement of up to approx. 200 litres/day. The Thermo Scientific Barnstead LabTower RO floor-standing unit prepares reverse osmosis water for medium-sized requirements, e.g. for an entire laboratory floor, and stores it in the integrated opaque 100 litre polyethylene tank. A state-of-the-art microprocessor control unit, the 100 litre clean water tank with residual drainage and a pressure pump are part of the LabTower RO's basic equipment. Mounted on castors, the compact and stylish LabTower RO is the ideal pure water supply for any laboratory. All LabTower RO systems are supplied for immediate use with: RO pre-treatment filter (5 µm filter and hardness stabilisation), RO membrane, 0.2 µm final filter, integrated 100 litre tank and pressure reducer.Type II pure water withdrawal directly from the system via the dispensing valve, e.g. for calibration solutions, reagent preparations, filling containers, general rinsing purposes, etc.Water withdrawal from the tank, e.g. for autoclaves, dishwashers, water baths and sterilised also for incubatorsThe tank is equipped with a tank volume display in per cent, a conical bottom drain for 100 % residual emptying. Optional expansion options such as a sterile overflow, sterile ventilation, UV disinfection unit with 254 nm protect against decontamination and bacterial growthIndividual adjustment of the volume stored in the tank via the control unitLaboratory-grade monitoring and documentation is made possible not only by our high-precision, temperature-compensated conductivity monitoring in accordance with USP 30 (645) with exact temperature display, but also by a potential-free contact and an RS-232 interface with connection option for an external data printer. Validation and qualification documents are optionally availableIntegrated feed water monitoring and the option of programming a limit value for the permeate quality additionally ensures the purity of the product waterAutomatic rinsing process of the membrane ensures a longer service lifeOptional manual dispenser with 3 m flexible circulation line for remote dispensing of the water. Kit contains a 0.2 µm final filter
Pure water system Barnstead™ LabTower™ TII
The direct path from tap water to pure water (1-10 MOhm) according to ASTM Type II. Laboratory water supply for a demand of up to 200 litres/day. The Thermo Scientific Barnstead LabTower TII is a modular pure water system. By combining various treatment technologies such as pre-treatment, reverse osmosis, ion exchanger and optional UV lamp, the LabTower TII produces pure water that exceeds even the highest quality standards such as ASTM II, CAP, ISO 3696, CLSI. A state-of-the-art microprocessor control, the 100 litre pure water tank with residual emptying, a pressure pump and tank recirculation are already standard features of the device. Mounted on castors, the compact and stylish LabTower TII is the ideal pure water supply for any laboratory. All LabTower TII systems are supplied for immediate use with: RO pre-treatment filter (5 µm filter and hardness stabilisation), RO membrane, ion exchanger, UV lamp (TII UV), 0.2 µm final filter, integrated 100 litre tank and pressure reducer.Pure water withdrawal directly from the system via the dispensing valve, e.g. for calibration solutions, reagent preparations, filling containers, general rinsing purposes, etc.Water withdrawal from the tank, e.g. for autoclaves, dishwashers, ultrapure water systems, water baths and sterilised also for incubatorsThe tank is equipped with a tank volume display in percent, a conical bottom drain for 100% residual emptying. Optional expansion options such as a sterile overflow, sterile aeration, UV disinfection unit with 254 nm protect against decontamination and bacterial growthIndividual adjustment of the volume stored in the tank via the control unit Laboratory-grade monitoring and documentation is made possible not only by our high-precision, temperature-compensated conductivity monitoring in accordance with USP 30 (645) with exact temperature display, but also by a potential-free contact and an RS-232 interface with connection option for an external data printer. Validation and qualification documents are optionally availableOptional manual dispenser with 3 m flexible circulation line for remote dispensing of water. Kit includes a 0.2 µm final filter
Purification pack Q-Gard®
For the removal of ionic and organic contaminants down to trace levels.
Purification pack SmartPak® DQ3
The purification pack, for use with the Direct-Q® 3 system, contains two cartridges for producing ultra-pure water from tap water.Cartridge 1: Pre-treatment (activated carbon and depth filter) and reverse osmosis membrane (RO)Cartridge 2: Ultrapure grade mixed bed ion exchange resin
Reservoirs for pure water purification system Barnstead™ Pacific™ TII and RO
For safely and convenient storage of high purity waterLarge opening for easy and effective cleaningVent filter with CO2 absorber to prevent conductivity increases from drawn-in CO2Sterile overflow to prevent microorganisms from entering and contaminating reservoir waterConstructed with inert materials opaque to lightRecirculation pump protects high purity water from bacterial growth during standstill while maintaining a low conductivity valueSimple and space-efficient wall mountingConical bottom outlet for complete emptyingAllows complete draining and efficient cleaning and disinfection*with pressure pump
Reverse Osmosis System arium® advance L
The arium® advance L laboratory water systems are designed for a reverse osmosis water requirement of up to 200 L/h.Combined with the integrated 100 or 200 liter storage tank the system provides the ideal volume of pre-treated feed water for your laboratory. The system can simultaneous feed several laboratory instruments at once, thanks to the powerful distributor pump. Its compact, square shape reduces space requirements to a minimum.Scope of supply: Arium® Advance L reverse osmosis system, RO-(reverse osmosis) module, connection kit for system and pre-filter housing, 5 μm pre-filter, activated carbon filter and dual filter housing.
Reverse osmosis system, LaboStar™ 10 RO DI
The LaboStar™ RO DI series produce high quality water with very low energy consumption. The use of "low energy" membranes enable a very efficient and economical operation. All LaboStar™ RO DI systems are equipped with a built-in 7 l storage tank. Pure water is collected in the tank and is recirculated by an integrated pump. LaboStar™ RO DI is equipped with a final DI cartridge. This cartridge polishes the RO water to Type II quality < 0.1 µS/cm. The unit offers two extraction ports: water can be extracted under pressure from the Point-of-use dispenser or from the outlet on the back of the unit. Optionally, a charged 0.2 µm sterile filter at the dispenser can be used to remove bacteria and endotoxins. An uncharged 0.2 µm sterile filter is also available. The 7 l storage tank capacity can be increased by an additional 30 or 60l tank. Pure water is collected in the tank and is recirculated by an integrated pump. LaboStar™ RO DI systems are delivered with the first set of all modules and filters required for immediate operation.Pure water circulation right into the dispenser headEasy to dispense water using the practical dispenser0.2 µm sterile filter with or without endotoxinretention as availableoptionWhisper operation modeRapid and simple disinfectionConductivity monitoring of RO and DI waterEasy module exchange via quick-release connectionsSmall and compactSpecificationsPermeate production rate at 15°C:10 l/hPermeat conductivity: 0.1Bacteria:1 KbE/ml (with a 0.2 µm sterile filter)Particle 0.2: 1 per mlFeed water conductivity: 2000 µS/cmSilt densitiy index SDI: 3Dimensions (W x D x H):290 x 400 x 535 mmPower supply:100-240 V, 50/60 Hz
Reverse osmosis system, Ultra Clear™ RO
Several models with outputs from 20 to 100 l/hr that provide pure water supplies from 100 to 2400 litres per day. The application of low- energy- membranes ensures an efficient and economical operation.Features:pure water treatment for simple analysis, laboratory rinsing machines, autoclaves, up to ultrapure water systemsgerm / pyrogen retention rate >99%modern, maintenance-friendly designmodular flushing for long service lifecomplete, connection-ready system; fittings allow supply tanks to be expanded if required (e.g. Ultra Clear™ RO supply tanks with 30, 60 and 80 litre capacities, larger tanks are available on request)menu-driven controller, RS232 interfaceUltra Clear™ RO DI: includes post-treatment module for residual desalination of permeate Entrance- and Product water quality will be shown on the display.SpecificationsSalt retention rate:96-98 %Residual conductivity, Ultra Clear™ RO DI: Germs reduction: 0.1µS/cm 99%Power requirement: Input conductivity: Blocking index SDI:200/300W 2000µS/cm 3Dimensions (W x D x H):340 x 420 x 520mmSupply water pressure:2 to 6bar
Reverse osmosis systems, Ultra Clear™ RO EDI
The well-proven Ultra Clear™ RO range has been enhanced to peak water quality level in the plus series by adding electronic deionisation cells: accessory deionisers for removing inorganic materials from the output are therefore no longer required.Technical parameters:Resistance up to 17 megohm (0.07µS/cm)TOC < 5 to 20ppb at RO cell outputTypical pure water quality < 0.07µS/cmIn all Ultra Clear™ RO systems the quality of the feed and output water will be shown on the display.Features:pure water treatment for simple analysis, laboratory rinsing machines, autoclaves, up to ultrapure water systemsgerm / pyrogen retention rate >99%complete, connection-ready system; fittings allow supply tanks to be expanded if required (e.g. Ultra Clear™ RO supply tanks with 30, 60 and 80 litre capacities, larger tanks are available on request)menu-driven controller, RS232 interfaceEntrance- and Product water quality will be shown on the display.SpecificationsRating:200 / 300WDimensions (W x D x H):340 x 420 x 520mmColloidal index (SDI): 3Supply water pressure:2 to 6 bar (0.1 to 5 bar Ultra Clear™ RO EDI 10)Input conductivity: 1400 µS/cm
Spare cartridge for ion exchanger LAB IoN® L2
With high-performance resinWith foam insertSecure grip due to flutingSuitable for conductivity meters with 4 and 8 LEDs