Centrifuge bottles Fiberlite™, PC
Bottles with a Fiberlite™ cap closure. Ideal for isolating cells, bacteria, and yeasts. The smooth inner walls of the bottles reduce shear forces during the separation of mammalian cell cultures. Non-cytotoxic. Autoclavable.
Centrifuge bottles Fiberlite™, PPCO
Bottles with a Fiberlite™ cap closure. Ideal for isolating cells, bacteria, and yeasts. The smooth inner walls of the bottles reduce shear forces during the separation of mammalian cell cultures. Non-cytotoxic. Autoclavable.
Centrifuge bottles Nalgene ™, PC, with conical bottom
For cell culture applications and protein biochemistry. PP sealing cap with silicone seal for added leak protection. The adapter is required for use.Crystal clearGraduated in 25 ml stepsAutoclavable
Centrifuge Bottles Nalgene™ with Sealing Cap , SuperSpeed
Designed to boost productivity and pellet recovery in super speed, large volume gross separation applications. Process one full Litre in each window-clear bottle at speeds up to 15810 x g. Graduated, wide-mouth bottle simplifies decanting, re-suspensions and pellet removal. Smooth inner walls are less likely to shear delicate cells. Ideal for bacterial, yeast and tissue isolations. Improve viral harvesting in vaccine production. Reduce shearing in mammalian culture separations. PC offers excellent clarity. Ergonomic design facilitates loading, recovery and storage of samples. Recommended operating temperature range is from 4 °C to 22 °C; storage to - 70 °C. Before autoclaving, just set closure on top of bottles without engaging the threads. For proper performance these bottles must be filled to at least 80 % of the total capacity.
Centrifuge bottles Nalgene™, BioBottle
Centrifuge bottle with 2L capacity.Separating large volumes up to 12LCentrifugation up to 7333xg, at temperatures from 4°C to 22°CBottle meets the requirements of USP VINon-cytotoxic, not hemolyticPPCO bottle, PP seal screw cap with silicone sealGraduated, total volume of 2380mlExcellent chemical resistanceBefore autoclaving, unscrew the cap and place it on the bottle neckBottles must always be at least 80% filledThe closure design features a two-piece plug and sealing cap to support aseptic handling techniques. Use of the two-piece closure system protects the bottle contents from contamination when the support bridge is applied and removed from the bottle. The plug includes a retaining ring to ensure and maintain the placement of the gasket during use. Dimensions (W x D x H): 111.3 x 175.3 x 209.3 mm.
Centrifuge bottles Nalgene™, PC
PC with PP screw cap. Crystal clear. Good mechanical strength. Autoclavable. Leak-proof even at low speeds. In order to ensure that the system is leak-proof even at high speeds and when centrifuging dangerous substances, the 250ml and 1000ml sizes must be used in conjunction with sealing screw cap sets.
Centrifuge bottles Nalgene™, PC, with seal closure
For harvesting, pelleting and protein purification of large cell volumes. Polypropylene sealing cap with silicone seal for added leak protection.Good mechanical strengthAutoclavableCrystal clear
Centrifuge bottles Nalgene™, PP-copolymer
PP-copolymer with PP screw cap. Autoclavable.
Centrifuge bottles, PP
Conical centrifuge bottles for large-capacity liquid centrifugation, for large-scale cell harvesting, as well as plasmid and protein purification.GraduatedWith screw capWorking temperature range: -80 °C to 121 °CSterilised by irradiation, SAL 10-6DNase/RNase-free, pyrogen-free
Centrifuge bottles, PPCO
Oval bottle for separating high-volume cell harvests (mammalian, yeast, and bacterial cells).
Centrifuge CVP-2
The CVP-2 enables the simultaneous sample preparation of multiple samples at one time. Versatile through being able to hold non-, semi- and fully-skirted PCR plates with no additional accessories required.Centrifuge and vortex mixer combined for significant time savingIndependent vortex and centrifuge timers with up to 999 cyclesAdjustable rpm or 4 programmable presetsConsistent preparation of up to 192 samples continuously
Centrifuge Frontier™ Multi FC5707, with angle rotor R05
Compact multifunctional centrifuge for general laboratory applications, with splash-proof control panel and touch-wheel control. The pre-installed angle rotor is suitable for round-bottom and conical tubes, as well as for conventional blood tubes.Backlit, two-lined LCD displayQuiet brushless motor10 acceleration and deceleration ratesFast spin for small measurement runsTimer 10 s to 99 h 59 min 59 sMemory for up to 99 programmesLid locking systemImbalance sensorAngle rotor for 8 x 15 ml tubesOptional accessories allow expansion to 7 ml, 5 ml and 1.5/2 mlScope of supply: Centrifuge, 8 x 15 ml angle rotor
Centrifuge Frontier™ Multi FC5707, with angle rotor R09
Compact multifunctional centrifuge for general laboratory applications, with splash-proof control panel and touch-wheel control. The pre-installed angle rotor is suitable for round-bottom and conical tubes, as well as for conventional blood tubes.Backlit, two-lined LCD displayQuiet brushless motor10 acceleration and deceleration ratesFast spin for small measurement runsTimer 10 s to 99 h 59 min 59 sMemory for up to 99 programmesLid locking systemImbalance sensorAngle rotor for 4 x 50 ml or 4 x 15 ml tubesScope of supply: Centrifuge, 4 x 50/15 ml angle rotor
Centrifuge kit, Mini-Centrifuge Sprout® plus
Centrifuge kit for mobile use. All items in kit are housed in a DuraPorter® transport box made of ABS, with insert to seat the centrifuge, all its accessories and incorporates a 16-place microtube rack.Scope of supply:Sprout® Plus Mini-Centrifuge, DuraPorter® transport box, portable 12 V Sprout® Plus centrifuge car adapter
Centrifuge Multi-spin PCV-6000
Combined centrifuge/vortex mixer for microtubes and 0.2ml strips. For independent centrifuge and vortex mixing operations, or a programmable sequence of spin and mix phases of multiple tubes.Vortex mixing intensity: three stage adjustment (soft, medium and hard)Interchangeable rotors for 2.0ml, 1.5ml, 0.5ml, 0.2ml microtube combinations and 0.2ml stripsTimed vortex mixing: 1sec to 20secSupplied with 2 rotors: 12 x 1.5/2.0ml and 12 x 0.5ml plus 12 x 0.2ml
Centrifuge Tube according to Goetz, pear-shaped, borosilicate glass 3.3
Tube used for the determination of small quantities of solids in large volumes of liquids. Recommended for the determination of free water and sediment in diesel and other distillate fuels, as a pass-fail indication of product quality (ASTM D2709). Graduation and scale in durable black ceramic enamel. Glass conforming to USP Type I and ASTM E438, Type I, Class A requirements. Stopper is included.Do not centrifuge with stopper in tube.Graduations:0.01 - 0.2 ml25, 50, 100 ml
Centrifuge tube, conical base, plain, Pyrex®
Manufactured from chemically inert Pyrex® glass for contamination-free performanceConical shape with rimCan be centrifuged up to 3000 RCF values
Centrifuge tube, conical, ASTM, Pyrex®
Complies with ASTM D96, D91, D-893 and D-1796In accordance with standard methods of testing for water and sediment in petroleum productsManufactured from chemically resistant Pyrex® borosilicate glass
Centrifuge tube, pear shape, ASTM, Pyrex®
Complies with ASTM D96 and D-1966For the determination of water and sediment in petroleum productsGraduated in white enamel:Lower stem graduated 0 to 1.5ml in 0.1ml divisionsUpper body graduated 1.5 to 5ml in 0.5ml divisions and from 5 to 10ml in 1ml
Centrifuge tubes CellSafeTM
ISO 13485 and ISO 9001 certifiedProduced in class 100000 clean roomsMade with USP Class VI standards medical-grade raw materialsGMP compliantMarked with batch numberTriple-bagged packagingSterilised by irradiation, SAL 10-6DNase/RNase-free, pyrogen-free, non-cytotoxic
Centrifuge Tubes Falcon®, PP, sterile, with screw cap
Large volume centrifuge tubes suitable for most standard centrifuges.Sterilised by gamma irradiationMolded graduationsSuitable for decantingAutoclavable
Centrifuge Tubes KIMAX®, graduated, borosilicate glass 3.3
Standard taper tube with a screw thread finish, graduated and calibrated to contain. An autoclavable phenolic cap with PTFE-faced rubber liner is packaged separately. Scale, legend, and marking spot are printed in durable white ceramic enamel. Manufactured to the specifications found in ASTM 2158, glass conforming to USP Type I and ASTM E438, Type I, Class A requirements.Division (15 ml): 0.05 / 0.1 / 0.15 / 0.2 mlDivision (100 ml): 0.05 / 0.1 / 0.2 / 0.5 / 1 ml
Centrifuge Tubes KIMAX®, heavy-duty, borosilicate glass 3.3
Centrifuge tubes with round bottom and screw caps. Heavy-duty tubes have thicker walls to withstand higher speeds in centrifuging. Marking spot is sandblasted. With autoclavable black phenolic caps cemented-in rubber liners are supplied unattached. Glass conforming to USP Type I and ASTM E438, Type I, Class A requirements.