Carriers for swing-out rotors A-4-81 and S-4x500
For use with IsoRack and cell culture flask adapters as well as MTP and DWP.
Cell culture package 1000 ml-bucket for floor centrifuges FC5917RF/FC5917RF Short
Scope of supply: Swing-out rotor 4 x 1000 ml, 4 x bucket 1000 ml, 4 x lid for bucket, 4 x rack (5 x 50 ml, Ø 29 mm, conical)
Cell culture package 500 ml-bucket for floor centrifuges FC5917RF/FC5917RF Short
Scope of supply: Swing-out rotor 4 x 1000 ml, 4 x bucket 500 ml or 7 x MTP, 4 x rack (10 x 50 ml, Ø 29 mm, conical), 4 x rack (24 x 15 ml, Ø 17 mm, conical)
Centrifugal filter JetSpin® with 15 ml centrifuge tube
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 5 mlCentrifuge tube: 15 mlWhite capPack of 4 x 24
Centrifugal filter JetSpin® with 2 ml centrifuge tube
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 0.5 mlCentrifuge tube: 2 mlPack of 12 x 25
Centrifugal filter JetSpin® with 50 ml centrifuge tube, 24 per box
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 15 mlCentrifuge tube: 50 mlWhite capPack of 4 x 24
Centrifugal filter JetSpin® with 50 ml centrifuge tube, 8 per box
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 15 mlCentrifuge tube: 50 mlWhite capPack of 12 x 8
Microcentrifuge 5425 (IVD), with foil keypad, with aerosoltight rotor FA-24x2 and QuickLock® Pro lid
The 5425 and 5425 R microcentrifuges are whisper-quiet and offer outstanding features for a wide range of molecular and cell biology applications in Eppendorf and PCR tubes from 0.2 to 5 ml.The refrigerated centrifuge 5425 R with its advanced cooling system offers precise temperature control for processing temperature-sensitive samples.Aerosol-tight Eppendorf QuickLock® lid for easy and safe handlingOutstanding software functions (e.g. adjustable acceleration and deceleration ramps, short function without constant key pressure)Extended rotor programme (e.g. 5.0 ml rotor, swing-out rotor for PCR strips)OptiBowl® design for quiet operation, even without rotor lidSoft-touch one-finger lid lock for ergonomic operationMaximum rotor capacity: 10 × 5.0 mL tubesMax. Speed: 21,300 × g (15,060 rpm)The 5425 and 5425 R microcentrifuges are whisper-quiet and offer outstanding features for a wide range of molecular and cell biology applications in Eppendorf and PCR tubes from 0.2 to 5 ml.The refrigerated centrifuge 5425 R with its advanced cooling system offers precise temperature control for processing temperature-sensitive samples.Aerosol-tight Eppendorf QuickLock® lid for easy and safe handlingOutstanding software functions (e.g. adjustable acceleration and deceleration ramps, short function without constant key pressure)Extended rotor programme (e.g. 5.0 ml rotor, swing-out rotor for PCR strips)OptiBowl® design for quiet operation, even without rotor lidSoft-touch one-finger lid lock for ergonomic operationMaximum rotor capacity: 10 × 5.0 mL tubesMax. Speed: 21,300 × g (15,060 rpm)
Microcentrifuge 5425/5425 R (IVD), with control knobs, with aerosoltight rotor FA-24x2 and QuickLock® Pro lid
The 5425 and 5425 R microcentrifuges are whisper-quiet and offer outstanding features for a wide range of molecular and cell biology applications in Eppendorf and PCR tubes from 0.2 to 5 ml.The refrigerated centrifuge 5425 R with its advanced cooling system offers precise temperature control for processing temperature-sensitive samples.Aerosol-tight Eppendorf QuickLock® lid for easy and safe handlingOutstanding software functions (e.g. adjustable acceleration and deceleration ramps, short function without constant key pressure)Extended rotor programme (e.g. 5.0 ml rotor, swing-out rotor for PCR strips)OptiBowl® design for quiet operation, even without rotor lidSoft-touch one-finger lid lock for ergonomic operationMaximum rotor capacity: 10 × 5.0 mL tubesMax. Speed: 21,300 × g (15,060 rpm)The 5425 and 5425 R microcentrifuges are whisper-quiet and offer outstanding features for a wide range of molecular and cell biology applications in Eppendorf and PCR tubes from 0.2 to 5 ml.The refrigerated centrifuge 5425 R with its advanced cooling system offers precise temperature control for processing temperature-sensitive samples.Aerosol-tight Eppendorf QuickLock® lid for easy and safe handlingOutstanding software functions (e.g. adjustable acceleration and deceleration ramps, short function without constant key pressure)Extended rotor programme (e.g. 5.0 ml rotor, swing-out rotor for PCR strips)OptiBowl® design for quiet operation, even without rotor lidSoft-touch one-finger lid lock for ergonomic operationMaximum rotor capacity: 10 × 5.0 mL tubesMax. Speed: 21,300 × g (15,060 rpm)
Microcentrifuge 5425 (General Lab Product), with foil keypad, with aerosoltight rotor FA-24x2 and QuickLock® Pro lid
The 5425 and 5425 R microcentrifuges are whisper-quiet and offer outstanding features for a wide range of molecular and cell biology applications in Eppendorf and PCR tubes from 0.2 to 5 ml.The refrigerated centrifuge 5425 R with its advanced cooling system offers precise temperature control for processing temperature-sensitive samples.Aerosol-tight Eppendorf QuickLock® lid for easy and safe handlingOutstanding software functions (e.g. adjustable acceleration and deceleration ramps, short function without constant key pressure)Extended rotor programme (e.g. 5.0 ml rotor, swing-out rotor for PCR strips)OptiBowl® design for quiet operation, even without rotor lidSoft-touch one-finger lid lock for ergonomic operationMaximum rotor capacity: 10 × 5.0 mL tubesMax. Speed: 21,300 × g (15,060 rpm)These centrifuges are General Lab Products for research purposes.
Microcentrifuge 5425/5425 R (General Lab Product), with control knobs, with aerosoltight rotor FA-24x2 and QuickLock® Pro lid
The 5425 and 5425 R microcentrifuges are whisper-quiet and offer outstanding features for a wide range of molecular and cell biology applications in Eppendorf and PCR tubes from 0.2 to 5 ml.The refrigerated centrifuge 5425 R with its advanced cooling system offers precise temperature control for processing temperature-sensitive samples.Aerosol-tight Eppendorf QuickLock® lid for easy and safe handlingOutstanding software functions (e.g. adjustable acceleration and deceleration ramps, short function without constant key pressure)Extended rotor programme (e.g. 5.0 ml rotor, swing-out rotor for PCR strips)OptiBowl® design for quiet operation, even without rotor lidSoft-touch one-finger lid lock for ergonomic operationMaximum rotor capacity: 10 × 5.0 mL tubesMax. Speed: 21,300 × g (15,060 rpm)These centrifuges are General Lab Products for research purposes.
Centrifuge bottle Nalgene™, FEP
Transparent centrifuge bottle made of FEP with ETFE screw cap. Ideal for lipid and phenole extraction, digestions and precipitations at low speeds. Autoclavable.
Centrifuge bottles CellSafeTM
ConicalISO 13485 and ISO 9001 certifiedProduced in class 100000 clean roomsMade with USP Class VI standards medical-grade raw materialsGMP compliantMarked with batch numberTriple-bagged packagingSterilised by irradiation, SAL 10-6DNase/RNase-free, pyrogen-free, non-cytotoxic