Membrane filters, Grade NL, made from pure polyamide
Application: Universal filter, especially in the pharmaceutical sectionProperties:Mechanically very strongFor aqueous and organic solutionsHydrophilicCan be used up to 135°CAutoclavable up to 134°C
Membrane filters, Grade NYL, Nylon
White. Hydrophilic membrane filters suitable for sterile and particle filtration of aqueous solutions and organic solvents.Uniform wettingGood mechanical stabilityAutoclavable at 135 °CNon-sterile
Membrane filters, Grade OE, made from cellulose acetate
Very high wet strength and very low ability for protein binding. For filtration of aqueous, alcohol and oil-based solutions at temperatures up to 180°C.
Membrane Filters, Grade RC, Regenerated cellulose
spontaneously wetted, very good wet-strengthhigh chemical resistance, useful for aqueous and organic mediahydrophiliccan be used up to 180 °Csterilisable by all methodssuitable for use as sterile filter to ASTM-D 3862-80Application: For the sterilisation and particle filtration of aqueous and organic solutions
Membrane filters, Grade TE, PTFE with support
Applications:Ideal venting filter for all applicationsFor aggressive media and cryogenic liquidsSeparation of free water from organic solutionsOutstanding as gas/liquid barrierFiltration of air and (hot) gasesProperties:Chemically inert to aqueous and organic solutions as well as concentrated acids and basesHydrophobic - for aqueous filtration the pressure must be higher than the water breakthrough pressureCan be used up to 145°CCan be sterilised by all methods except gamma radiation
Membrane filters, inorganic, Anodisc®
Material: Anopore®. White.The inorganic membrane Anopore® consists of high-purity aluminium oxide and can be used for a wide range of applications. The unique material has a precise, non-deformable honeycomb structure with a narrow pore size distribution range that guarantees very efficient particle retention. In addition, the membrane has a low protein binding capacity, minimal autofluorescence, is non-toxic and supports cellular growth.
Membrane filters, mixed cellulose ester
White. For various applications.HydrophilicAutoclavable
Membrane filters, mixed cellulose ester (MCE)
Sterile, individually wrapped membrane filters for the microbiological analysis of aqueous samples using the membrane filter technique.
Membrane filters, mixed cellulose ester, with grid
Recommended for clarification and sterilisation of aqueous solutions, microbiological analysis and particle countsMembranes with grid lines are ideal for microbiological analysis (bacterial counts) of water, pharmaceuticals, beverages, cosmetics, etc. for the measurement of coliform bacteria and other germsGridded membranes (black grid on white membrane) for counts of colonies as a standard method of quantification, black grid, clearly defined sections (3.1 x 3.1 mm grid)Special ink, non-toxic and totally free from bacterial growth inhibitors, is used for imprintingSterilised membranes (packaged in individual blisters)
Membrane Filters, nylon
Recommended for filtration, sterilisation and clarifications of mobile phase in HPLC processes with aqueous, alkaline and organic samplesMade entirely of polyamide, hydrophilicHigh non-specific adsorption, high mechanical stabilityQualified for many solvents and alkaline solutions, pH range 3-14Maximum temperature 134 °C
Membrane filters, Nylon
Hydrophilic, durable and compatible with a wide range of aqueous solutions, organic solvents and for the filtration of biological preparations and media. Autoclavable at 121 °C.
Membrane filters, Polyamide
Type 250. Polyamide, white. For filtration of alkaline solutions and organic solvents.Other patterns are available on request.
Membrane filters, regenerated cellulose
The very low adsorption membranes are hydrophilic, solvent-resistant (pH 3-12) and therefore suitable for the particle removal from solvents.
Membrane filters, type 114, cellulose nitrate
White membrane with black grid, for detection of bacteria with dyed media, particle count & microscopy, individually, sterile packaged / non sterile.
Membrane filters, type 139, cellulose nitrate
White membrane with green grid, for detection of bacteria with dyed media, particle count and microscopy, individually, sterile packaged / non sterile.
Membranfilter, hydrophob, PTFE
White. For the filtration of air and gases, as well as the filtration of solvents and acids.Good chemical resistanceAutoclavableNon-sterile
Microfiber filter T293, quartz
For emission control.HydrophilicAir / Gas FiltrationNon-sterile
Microfilterplates, 96-wells
Glasfiber (GF) filter characteristics:Recommended forpurificationPrefiltering of dirty solutionsRapid flow rateHigh particle loading capacityPolyethylene (PE) filter characteristics:Suitable for particle-removing coarse filtrationCan be used both as a prefilter or as support filter in combination with other filtersHydrophobicVery good chemical resistance
Mini Filtration cartridges Sartoclean® CA Mini Cartridge, with prefilter
Housing PP. Filters made of cellulose acetate for prefiltration in the biophamacy area.Bayonet adapter with o-ringLow adsorptionAutoclavable at 134 °C for 30 minutes at 2 barManufactured according to ISO 9001 QMS standardPre-filter pore size 3 µm
Mini-cartridge filters, Sartobran-P
Mini-cartridge filters are inserted into a stainless steel housing. The bayonet closure provides a secure seal against back-pressure surges. An inner O-ring seals the lower part of the housing (except for the aeration housing). For the filtration of larger volumes and for long service lives. Individually tested. Their integrity can be checked at any time. Can be autoclaved repeatedly.Heterogeneous double membrane of cellulose acetate, for the sterile filtration of liquids. Pore size pre-filter 0,45 µm.
Mini-cartridge filters, Sartofluor
Mini-cartridge filters are inserted into a stainless steel housing. The bayonet closure provides a secure seal against back-pressure surges. An inner O-ring seals the lower part of the housing (except for the aeration housing). For the filtration of larger volumes and for long service lives. Individually tested. Their integrity can be checked at any time. Can be autoclaved repeatedly.Hydrophobic PTFE membrane filter, for the sterile filtration of air and gases.
Mini-cartridge filters, Sartopure-PP3
Mini-cartridge filters are inserted into a stainless steel housing. The bayonet closure provides a secure seal against back-pressure surges. An inner O-ring seals the lower part of the housing (except for the aeration housing). For the filtration of larger volumes and for long service lives. Individually tested. Their integrity can be checked at any time. Can be autoclaved repeatedly.High performance PP fleece prefilters for particle reduction.
Mini-Spike®
Vented dispensing pin with swabable needle-free access valve for injections and withdrawals of non-toxic fluids . Protection against the risk of chemical contamination.Mini-Spike® ChemoWith integrated 0.2 µm ventilation filterWith integrated 5 µm particle filterWith snap capMini-Spike® Chemo Vpossesses an integrated two way valve which protects against free-flow when the system is turned upside down.Mini-Spike® Chemo with micro tipoffers a thinner spike to perforate smaller vials to prevent small rubber stoppers from being pushed into the vial.Mini-Spike® 2Vented dispensing pin with swabable needle-free access valve for injections and withdrawals of non-toxic fluids from containersProtection against the risk of chemical contaminationIntegrated air vent making over-pressure release techniques unnecessary