Air condensers without jacket, DURAN® tubing

Made of DURAN® tubing. For easily condensable vapours. With NS cone and drain ring.

Air leak rod, DURAN®

With bulb (Diameter: 6mm, Wall thickness: 1.5mm).

Air regulator Type HM-2

For tubes:8mm to 15mm diameter, 6mm to 12.5mm diameterFor air-leak capillary tubes. Acts as a fine regulation valve (needle valve). Plastic body. Brass needle with fine thread.

Allihn condensers for Soxhlet

Manufactured from borosilicate glass 3.3 with glass side arm. The side arms accept tubings with 8/9 mm bore size.

Alu-Rings with hooks

For cones and sockets to be used with springs for the safe connection of conical ground joints. No breakage of glass hooks.

Anchor stirrer for Synthesis reactors EasySyn Advanced and Starter, PTFE

PTFE-coated anchor stirrer for use with reactor systems EasySyn.

Angle valves, PRODURAN®

Angle valves with spindle (PTFE) and integrated fine thread enable very fine adjustment of the valve opening.Media only come into contact with Duran® glass and PTFEUnscrewing protection prevents absolute unscrewing of the valve pin

Assembly set KECK®

For attaching flexible vacuum tubing to filter flasks. Consists of straight PP tubing connection, PP tubulature made of silicone (VMQ) rubber seal. PP components can withstand temperatures up to 140°C for short periods without mechanical load.

Ball members, DURAN® tubing

Made of DURAN® tubing. DIN 12264 and in addition to DIN standard.

Bath vessel for micro-distillation system

Thick-walled, plane-ground bottom (capacity approx. 600 ml).

Bellows, PTFE

Strainless connection of ground joint equipment; for compensating vibrations from vacuum pumps; for length compensation of heated columns; angular misalignment.Made of PTFE, with sharp folds and sealing rings on the outside; maximum deflection: 120°.

Bends

Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals. Suitable for the usage of assembling various reactor systems. Available in two shapes: bend with angle 75° or 90°.

Bends, DURAN® tubing

Made of DURAN® - tubing. Bent 75° or 90°. With two NS cones.

Blades, PTFE

Boiling chips, type Resistent

Developed for preparatory and analytical purposes. Suitable for biochemistry, biotechnology, microbiology, microanalysis. Can even be used in strong acids and alkalis, and in all solvents and oxidants. Suitable for vacuum and high-vacuum distillation. Reduces distillation times in rotary evaporators. No abrasion, absorption of substances or solvents. Softening (evaporation) occurs at 2500°C. Can be sterilised by dry heating. Effective in even the smallest volumes of liquid, even after multiple interruptions. Prevents any bumping. Highly resistant.

Boiling stones behrotest®

behrotest® boiling stones are made from a ceramic material. Compared to conventional boiling stones made of glass, they provide optimum protection against defervescence due to their porosity and their shape, even with badly blended samples.behrotest® boiling stones are chemically pure and guarantee unadulterated results when determining the COD, the Kjeldahl nitrogen etc.

Boiling stones, PTFE

Prevents bubbling and bumping when boiling a medium.Long lifeUniversal chemical resistanceOperating temperature -200 °C to 250 °C

Boiling stones, Type A

Developed for use in preparatory work. For distillation and reflux in aqueous, neutral and alkaline solvents, even under a vacuum. Effective in even the smallest volumes of liquid and after multiple interruptions. Prevents any bumping. Natural product.

Boiling stones, Type B

Specifically for analytical work. Can be used for distillation in a clean, neutral and basic environment. Not suitable for vacuum distillation. Effective in the smallest amounts of liquid, also after multiple distillations. Prevents " bumping". Ceramic product with relatively high level of purity and abrasion resistance.

Bubble counter

DURAN®.

Bubble counter, DURAN®

DURAN® borosilicate glass. Modified, with NS 14.5/23 cone for direct mounting onto apparatus assemblies, screw neck and cap for filling with oil and tubing connector.

BUDDE - joint grease, silicone-free

For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30 °C and 200 °C, non-solidifying. Compatible with most elastomers. Tube of 80 g.

Clamp ring for Synthesis reactors EasySyn Advanced and Starter

For fastening the reactor lid to the reactor vessel.

Clamps with stand rod

For fixing lids onto reaction vessels and mounting on a stand,Material: polyester-glass compound (clamp), steel (rod)