Microlitre syringes, 700 series, with cemented needle (N)
With cemented needle (N, NR). NR stands for syringes with Rheodyne specified needles. Plungers are individually fitted, therefore cannot be interchanged and are not available as replacement parts. Needle length 51 mm.
Microlitre syringes, 7000 series
The end of the plunger has a tungsten wire extension that fits the entire length of the needle all the way to the tip, resulting in a zero dead volume syringe.
Microlitre syringes, 800 series, with cemented (N) or removable needles (RN)
With metal handle. Plungers are individually fitted, therefore cannot be interchanged and are not available as replacement parts. Cemented needles (N) or removable needle (RN).
Microlitre syringes, 800 series, without needles
With metal handle. Plungers are individually fitted, therefore cannot be interchanged and are not available as replacement parts.
Mounting key for fittings, POM
For tightening and loosening fittings (1.6/2.2/3.2 mm OD), with lateral slot to lead through tubing.
Multiple bottle distributors GL 45, HDPE
Up to 4 Safety Caps or Safety Waste Caps can be installed with the multiple bottle distributor.GL 45 (w) thread4 x GL 45 (m) connectionsElectrically conductiveIncl. 1 x blind cap
Multiple bottle distributors GLS 80, HDPE
The S.C.A.T. system for solvent safety remains permanently closed, the "safety chain" is not interrupted during the rinsing process of the HPLC system. After the analysis has been completed, the system is cleanly returned to its original state.Up to 4 SafetyCaps can be installed on the rinsing bottleSimple and safe handling due to firmly seated capillariesGLS 80 (w) thread4 x GL 45 (m) connectionsElectrically conductive
Multiple bottle distributors, PP/PPS
Screw cap with free movable insert made of PP, with 4 lateral connectors GL45 and 3 centric capillary connectors (UNF 1/4"), incl. 3 blind fittings.
Multiport, PTFE
Multiport for capillary and tubing connectors on b.safe caps with thread NPT 1/8". With PFA fittings for capillaries (O.D. 1.6/2.2/3.2 mm) and hose olives for tubing with I.D. 5.5 to 8.0 mm. Fittings (UNF 1/4"), hose olives (NPT 1/8").
Nano separating chambers, with knob/ stainless lid
The nano separating chamber was developed for the preferred plate format of 100 mm highs and have all the advantages of standard separating chambers.
Nano-Adamant unmodified nano silica layers for HPTLC
Support materials for TLC ready-to-use layersGlass plates: glass, ~ 1.3 mm thick, high requirements for weight, packaging and storage, ideal torsional strength, high temperature stability, susceptible to breakage, can not be cut with scissors, high resistance against solvents, mineral acids and conc. ammonia, suitability for aqueous detection reagents depends on the phasePOLYGRAM®: polyester, ~ 0.2 mm thick, low requirements for weight, packaging and storage, low torsional strength, max. 185 °C temperature stability, not susceptible to breakage, can be cut with scissors, high resistance against solvents, mineral acids and conc. ammonia, very suitable for aqueous detection reagentsALUGRAM®: aluminium, ~ 0.15 mm thick, low requirements for weight, packaging and storage, relatively high torsional strength, high temperature stability, not susceptible to breakage, can be cut with scissors, high resistance against solvents, low resistance against mineral acids and conc. ammonia, limited suitability for aqueous detection reagentsGlass platesnano silica 60, specific surface (BET) ~ 500m2/g, mean pore size 60Å, specific pore volume 0.75ml/g,particle size 2 to 10 µmoutstanding hardness and abrasion resistance due to an optimized binder system increased separation efficiency due to an optimized particle size distribution high suitability for trace analyses resulting from a UV indicator with increased brilliance and a low-noise background of the layer narrow fractionation of the silica particles allows theoretical plate heights, which are one order of magnitude smaller than on standard silica layers with the advantage of sharper separations, shorter developing times, shorter migration distances, lower amount of samples, and increased detection sensitivity with equal selectivity.Available as glass plates with or without fluorescent indicator (UV 254).
Needles for LT / TLL / TLLX syringes
Removable. With Luer tip made of Kel-F. All hypodermic needles available according to specification in 10 mm to max. 1000 mm lengths. Further point styles and diameters available on request. Needle length: 51 mm
Needles for TLL syringes, metal
Removable, with Luer tip. Needle length: 51 mm.