HPLC Waste set 20
Scope of supply:1 x Safety Waste Cap, S60/613 x PFA fitting 2.3 mm OD3 x PFA fitting 2.3 mm OD3 x PFA fitting 3.2 mm OD3 x PP tube connector 5.0 - 11.5mm ID1 x GL14 connection for exhaust filter1 x canister, S60/61, 5 l, HDPE, UN-X1 x exhaust filter M, with splash guard and change indicator
Installation wrench, POM, hexagonal
For tightening and loosening PFA fittings, with lateral slot to lead through tubing.
Level controls, PTFE, electrically conductive
Extension for SafetyWasteCaps 3.0.
LLG-Test tubes, soda-lime glass
Test tubes with round bottom.Hydrolytic resistance: Class HGB 3 acc. to ISO 719, Type III acc. to C - USP.
Locking nuts, PP, for thread adapters with ground joint
To loosen stuck ground joints.
Mounting key for fittings, POM
For tightening and loosening fittings (1.6/2.2/3.2 mm OD), with lateral slot to lead through tubing.
Multiple bottle distributors GL 45, HDPE
Up to 4 Safety Caps or Safety Waste Caps can be installed with the multiple bottle distributor.GL 45 (w) thread4 x GL 45 (m) connectionsElectrically conductiveIncl. 1 x blind cap
Multiple bottle distributors GLS 80, HDPE
The S.C.A.T. system for solvent safety remains permanently closed, the "safety chain" is not interrupted during the rinsing process of the HPLC system. After the analysis has been completed, the system is cleanly returned to its original state.Up to 4 SafetyCaps can be installed on the rinsing bottleSimple and safe handling due to firmly seated capillariesGLS 80 (w) thread4 x GL 45 (m) connectionsElectrically conductive
Multiple bottle distributors, PP/PPS
Screw cap with free movable insert made of PP, with 4 lateral connectors GL45 and 3 centric capillary connectors (UNF 1/4"), incl. 3 blind fittings.
Multiport, PTFE
Multiport for capillary and tubing connectors on b.safe caps with thread NPT 1/8". With PFA fittings for capillaries (O.D. 1.6/2.2/3.2 mm) and hose olives for tubing with I.D. 5.5 to 8.0 mm. Fittings (UNF 1/4"), hose olives (NPT 1/8").
NUCLEOGEL® SUGAR 810 Ca
Sulphonated polystyrene/divinylbenzene resins in diffent ionic forms and RP chromatographySeparation mechanism includes ion exclusion, ion exchange, size exclusion, ligand exchange as well as NP and RP chromatographyValco type columns for separation of mono-, di- and oliogosaccharides - USP L19 eluent in column water.
NUCLEOGEL® SUGAR 810 H
Sulphonated polystyrene/divinylbenzene resins in diffent ionic forms and RP chromatographySeparation mechanism includes ion exclusion, ion exchange, size exclusion, ligand exchange as well as NP and RP chromatographyValco type columns for separation of sugars, sugar alcohols and organic acids - USP L17 eluent in column 0.01 N H2SO4
Power supply unit for electronic level control
EU 220/230 V / 24 V. Cable length 1900 mm.
Preparative HPLC columns Nucleosil®100-5 C18
Grain size 5 µm, pore dia. 100 Å. Octadecyl phase, endcapped, 15 % C.
Quick couplings 2.0, for Safety Caps / Safety Waste Caps, PP
For safe connection of capillaries with outer diameter 1.6 / 2.3 / 3.2 mm.Drip protection due to integrated locking valveClosed system for drip-free separationEPDM sealIncl. PFA fittings (1.6 / 2.3 / 3.2 mm ID)Quick couplings for screwing into the standard connectors of Safety Caps (UNF 1/4" 28G), incl. 3 PTFE sealing balls (1.6 / 2.3 / 3.2 mm ID)
Quick couplings, PP
Two-part tubing coupling with PFA Fitting to connect capillaries with O. D. 3,2 mm. When the couplings are separated, the valves are automatically closed in order to avoid solvent escape.
Safety Caps V2.0, GL 45
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Scope of suppy:Safety Cap, air valve, change indicator, PFA fittings, PFA blind plug, labelling field
Safety Caps, 38-430
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Scope of supply:Safety Cap, air valve, change indicator, PFA fittings, PFA blind plug
Safety Caps, B 53
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Scope of supply:Safety Cap, air valve, change indicator, PFA fittings, PFA blind plug