Hose connectors for Waste Caps
For the connection of tubing on b.safe Waste Caps.
Hose connectors for Waste Caps with luerlock connection
For the connection of tubing on b.safe Waste Caps.
Hose connectors for Waste SafetyCaps
For connecting hoses to the capillary positions of the Waste SafetyCaps.
HPLC bottle distributors
Made of glass-fibre reinforced polypropylene (PP). Up to four tubes (preferably PTFE) can be connected to bottles at once. Distributors can be screwed on to any container with a GL45 neck via the screw cap. Supplied with all accessories (screw caps, silicone rings or O-rings, sealing caps) for immediate use. Choice of model; with, or without stopcock.
HPLC bottles, DURAN® complete system 4-port screw cap
For sterile transfer of media or for feeding solvent to HPLC instruments. The bottle is pressure/vacuum resistant from -1 to +1.5 bar (tested by TÜV in accordance with EN 1596, GS marked). Complete with a 4-port screw cap (autoclavable, reusable) made from PP, 4 connection screw caps (black, M8 thread) and silicone seal. Suitable for tube diameters of 1.6mm and 3.2mm. Spare parts are available individually. Further connection system components for the GL45 thread are available upon request (Tubing not included). Neutral / Type I glass acc. to USP/EP. With Retrace Code (Batch Identification), with certificate available via the internet. Autoclavable.
HPLC reservoir bottles DURAN®, borosilicate 3.3 glass, with conical base
The DURAN® reservoir bottles have been designed for use in high-performance liquid chromatography (HPLC) and allows longer, uninterrupted analyses. A central cavity in the bottom of the bottle allows mobile phases and solvents to be dispensed without tilting the bottle. Side vent hole in the base for ultrasonic bath degassing, or water drainage after cleaning. Screw caps HPLC (PTFE, GL 45, 3 ports) available as accessories.GL 45 ThreadISO 3585Type I neutral glass, by USP / EPWith Retrace Code and certificate for manufacturing lot traceabilityAvailable in four sizes: 1, 2, 5, or 10 Litres5 and 10 litre bottles can accommodate magnetic stirring barsDurable white enamel volume graduationsAutoclavable at 121 °C or 134 °C
HPLC Safety Set Generation 2.0
HPLC Safety Set HPLC Safety Set Generation 2.0 suitable for all HPLC SystemsComplete system for safe extraction and disposal of solvents.One single set for Solvent supply and Waste:4x SafetyCap III HPLC Safety Set (Generation 2.0) GL45 4x Air valve HPLC Safety Set (Generation 2.0) comes with SafetyCap III4x Solvent bottle 1 L, GL45, glass 10x Blind plug for capillary connections 5x Fittings ID 2.3 mm violet 5x Fittings ID 3.2 mm blue 5x Fitting ID 1,6 mm green5x Fittings ID 3.2 mm yellow1x Tube fitting, curved, 6.4-9.0 mm (comes with SafetyWasteCap GL45)1x SafetyWasteCap HPLC Safety Set (Generation 2.0) GL451x Exhaust filter HPLC Safety Set (Generation 2.0) size M1x Container 5 L, GL45, HDPE2x Tube fitting, straight, 6-8 mm1x Tube fitting, angled, 9.5-10 mm
HPLC starter kit I, GL45, for PFAS analysis
For the safe withdrawal of solvents. Screw caps, with freely movable insert, with PP fittings for capillaries and an air valve, with change indicator. For PFAS analysis of polyfluorinated chemicals according to DIN 38407-42/ DIN 38414-14.Complete set for up to 4 storage bottlesSuitable for all current HPLC systemsScope of supply:3 x Safety Cap I, GL 45, PFAS-Analytic1 x Safety Cap II, GL 45, PFAS-Analytic4 x air valve, PFAS-Analytic4 x change indicator5 x PP fitting 1.6 mm OD5 x PP fitting 2.3 mm OD5 x PP fitting 3.2 mm OD1 x PP blind plug4 x labelling field
HPLC starter kit II, GL45, for PFAS analysis
For the safe withdrawal of solvents. Screw caps, with freely movable insert, with PP fittings for capillaries and an air valve, with change indicator. For PFAS analysis of polyfluorinated chemicals according to DIN 38407-42/ DIN 38414-14.Complete set for up to 4 storage bottlesSuitable for all current HPLC systemsScope of supply:4 x Safety Cap II, GL 45, PFAS-Analytic4 x air valve, PFAS-Analytic4 x change indicator8 x PP fitting 1.6 mm OD8 x PP fitting 2.3 mm OD8 x PP fitting 3.2 mm OD4 x PP blind plug4 x labelling field
HPLC starter kit III, GL45, for PFAS analysis
For the safe withdrawal of solvents. Screw caps, with freely movable insert, with PP fittings for capillaries and an air valve, with change indicator. For PFAS analysis of polyfluorinated chemicals according to DIN 38407-42/ DIN 38414-14.Complete set for up to 4 storage bottlesSuitable for all current HPLC systemsScope of supply:4 x Safety Cap III, GL 45, PFAS-Analytic4 x air valve, PFAS-Analytic4 x change indicator12 x PP fitting 1.6 mm OD12 x PP fitting 2.3 mm OD12 x PP fitting 3.2 mm OD8 x PP blind plug4 x labelling field
HPLC starter kit IV, GL45, for PFAS analysis
For the safe withdrawal of solvents. Screw caps, with freely movable insert, with PP fittings for capillaries and an air valve, with change indicator. For PFAS analysis of polyfluorinated chemicals according to DIN 38407-42/ DIN 38414-14.Complete set for up to 4 storage bottlesSuitable for all current HPLC systemsScope of supply:4 x Safety Cap IV, GL 45, PFAS-Analytic4 x air valve, PFAS-Analytic4 x change indicator16 x PP fitting 1.6 mm OD16 x PP fitting 2.3 mm OD16 x PP fitting 3.2 mm OD12 x PP blind plug4 x labelling field
HPLC starter kits 1, Generation 2.0, GL 45
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Complete set for one HPLC system with up to 4 solvent reservoirsPrice advantage compared to ordering piece by pieceSuitable for all current HPLC systemsUse the supplied blind plugs to tighten connectors which are temporarily inactive or not in useScope of supply: 3 x SafetyCaps I, 1 x SafetyCap II, 4 x air valve, 4 x change indicator, 5 x 1,6/ 5 x 2,3/ 5 x 3,2 mm PFA fittings, 1 x PFA blind plug, 4 x labelling field
HPLC starter kits 2, Generation 2.0, GL 45
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Complete set for one HPLC system with up to 4 solvent reservoirsPrice advantage compared to ordering piece by pieceSuitable for all current HPLC systemsUse the supplied blind plugs to tighten connectors which are temporarily inactive or not in useScope of supply: 4 x SafetyCaps II, 4 x air valve, 4 x change indicator, 8 x 1,6/ 8 x 2,3/ 8 x 3,2 mm PFA fittings, 4 x PFA blind plugs, 4 x labelling field
HPLC starter kits 3, Generation 2.0, GL 45
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Complete set for one HPLC system with up to 4 solvent reservoirsPrice advantage compared to ordering piece by pieceSuitable for all current HPLC systemsUse the supplied blind plugs to tighten connectors which are temporarily inactive or not in useScope of supply: 4 x SafetyCaps III, 4 x air valve, 4 x change indicator, 12 x 1,6/ 12 x 2,3/ 12 x 3,2 mm PFA fittings, 8 x PFA blind plugs, 4 x labelling field
HPLC starter kits 4, Generation 2.0, GL 45
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Complete set for one HPLC system with up to 4 solvent reservoirsPrice advantage compared to ordering piece by pieceSuitable for all current HPLC systemsUse the supplied blind plugs to tighten connectors which are temporarily inactive or not in useScope of supply: 4 x SafetyCaps IV, 4 x air valve, 4 x change indicator, 16 x 1,6/ 16 x 2,3/ 16 x 3,2 mm PFA fittings, 12 x PFA blind plugs, 4 x labelling field
HPLC starter kits 6, Generation 2.0, GL 45
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Complete set for one HPLC system with up to 4 solvent reservoirsPrice advantage compared to ordering piece by pieceSuitable for all current HPLC systemsUse the supplied blind plugs to tighten connectors which are temporarily inactive or not in useScope of supply: 4 x SafetyCaps VI, 4 x air valve, 4 x change indicator, 24 x 1,6/ 24 x 2,3/ 24 x 3,2 mm PFA fittings, 20 x PFA blind plugs, 4 x labelling field
HPLC Supply and waste set
Scope of supply:4 x Safety Cap III, GL458 x air valve1 x Safety Waste Cap, GL451 x Exhaust filter L, V3.0, with splash guard and change indicator, service life 12 months1 x 5 l canister, HDPE4 x Laboratory bottle DURAN, GL45, 1000 ml, clear glass, with cap and pouring ring5 x PFA-fitting, 2.3 mm OD, violet5 x PFA fitting, 1.6 mm OD, green10 x PFA fitting, 3.2 mm OD, blue10 x PFA blind plug2 x hose connectors, straight, 6 - 8 mm ID1 x hose connectors, curved, 5.0 - 11.5mm ID1 x hose connectors, angled, 9.5 - 10 mm ID
HPLC Supply and waste set, electrostatic conductive
Scope of supply:4 x Safety cap III, GL458 x air valve1 x Safety waste cap, S60/61, electrostatic conductive1 x Exhaust filter L, V3.0, with splash guard and change indicator, service life 12 month1 x 5 l canister, HDPE-EL1 x Grounding cable, 2 x clamp, L = 1,5 m4 x Laboratory bottle DURAN, GL45, 1000 ml, clear glass, with cap and pouring ring5 x PFA-fitting, 2.3 mm OD, violet5 x PFA fitting, 1.6 mm OD, green10 x PFA fitting, 3.2 mm OD, blue10 x PFA blind plug2 x hose connector, straight, 6 - 8 mm ID1 x hose connector, curved, 5.0 - 11.5mm ID1 x hose connector, angled, 9.5 - 10 mm ID
HPLC Supply-Set II, type 4
This set with storage bottle and safety cap ensures a safe supply of solvent. The air valve blocks the escape of solvent vapours and ensures pressure equalisation during withdrawal.Scope of supply:Safety Cap II (GL28), air valve, change indicator, 1 x 100 ml laboratory bottle (brown glass), 2 x 1,5 m capillary 3,2 mm OD, 2 x PTFE suction filter, 2 x PFA fitting 1,6 mm OD, 2 x PFA fitting 2,3 mm OD, 2 x PFA fitting 3,2 mm OD, 1 x PFA blind plug, labelling field
HPLC Waste disposal set 1, V2.0
Waste disposal set consisting of:Safety Waste Cap GL 452 x PFA fitting 2.3/3.2 mm OD1 x PP tube connector 5,0 - 11,5 mm ID5 l canister, HDPEExhaust filter M, with splash guard and change indicator
HPLC Waste disposal set 2, V2.0
Waste disposal set consisting of:Safety Waste Cap GL 452 x PFA fitting 2,3/3.2 mm OD1 x PP tube conector 5,0 - 11,5 mm ID10 l canister, HDPEExhaust filter M, with splash guard and change indicator
HPLC Waste disposal set 3, V2.0
Waste disposal set consisting of:Safety Waste Cap S 502 x PFA fitting 2,3/3.2 mm OD1 x PP tube conector 5,0 - 11,5 mm ID5 l space saving canister, PPExhaust filter S, with splash guard and change indicator
HPLC Waste disposal set 4, V2.0, S 60/61
Waste disposal set consisting of:1 x SafetyWasteCap S 60/612 x PFA fitting 2,3/3.2 mm OD1 x PP tube conector 5,0 - 11,5 mm ID12 l canister, HDPEExhaust filter M, with splash guard and change indicator