Distributor for capillaries, PTFE
Distributor with 3 x PFA fittings for connecting capillaries (O.D. 3.2 mm).
Distributor for capillaries, PTFE
Distributor with 3 x PFA fittings for connecting capillaries (O.D. 3.2 mm).
Eluent SafetyCap Starter Kit I
Starter kits for HPLC with up to 4 storage bottles. The kits also contain air valves, fittings for connecting capillaries, and blind fittings for closing connections that are not required.Scope of supply: 4 x Eluent SafetyCaps with 1 PP fitting, 4 x air valves
Eluent SafetyCap Starter Kit II
Starter kits for HPLC with up to 4 storage bottles. The kits also contain air valves, fittings for connecting capillaries, and blind fittings for closing connections that are not required.Scope of supply: 3 x Eluent SafetyCaps with 1 PP fitting, 1 x Eluent SafetyCap with 2 PP fittings, 4 x air valves, 1 x blind fitting
Eluent SafetyCap Starter Kit III
Starter kits for HPLC with up to 4 storage bottles. The kits also contain air valves, fittings for connecting capillaries, and blind fittings for closing connections that are not required.Scope of supply: 4 x Eluent SafetyCaps with 2 PP fittings, 4 x air valves, 4 x blind fittings
Eluent SafetyCaps
Suitable for solvent extraction. The integrated air valve blocks hazardous solvent vapours and filters the incoming air via a PTFE membrane. All unused capillary positions must be closed with a blind fitting.With timestrip stickerClosures and fittings made of PPBody made of PTFE
Exhaust filter for barrels, PE
The exhaust filters, filled with activated carbon, prevent harmful solvent vapours from leakage.Lid with aeration openingsLabelling field to monitor service lifeXL for 60 - 100 l barrelsXXL for barrels from 100 l
Exhaust Filter, PP
Lid with integrated ventilation openings and service life indicator. The filling of activated carbon is protected by two porous membranes made of PE. This allows an unobstructed flow of exhaust air, solvents are adsorbed by the activated carbon and only filtered air streams out.
Exhaust filters for Waste SafetyCaps
The exhaust filter cleans the exhaust air of HPLC waste. The activated carbon in the exhaust filter is optimised for the absorption of organic solvent vapours. With timestrip sticker for timely replacement of the exhaust filter.
Exhaust filters V3.0, with change indicator
The exhaust air filters are equipped with three different activated carbon layers, which bind acids and alkalis and adsorb organic solvent vapours. Depending on the required capacity, filter with different service lifes are available.Filter media with a very high performance spectrum for acids and alkalisOptimised for binding buffer solutions and solvent vapoursWith splash guard1500 m²/g adsorption surface area
Exhaust filters V3.0, with change label
The exhaust air filters are equipped with three different activated carbon layers, which bind acids and alkalis and adsorb organic solvent vapours. Depending on the required capacity, filter with different service lifes are available.Filter media with a very high performance spectrum for acids and alkalisOptimised for binding buffer solutions and solvent vapoursWith splash guard1500 m²/g adsorption surface area
Fittings for Eluent SafetyCaps / Waste SafetyCaps
For filling the capillary positions of SafetyCaps.
Fittings for SafetyCaps / SafetyWasteCaps
Fittings with integrated ferrule for SafetyCaps and SafetyWasteCaps.Use the blind plugs to tighten connectors which are temporarily inactive or not in use.
Fittings preparative, PTFE, for Caps
For fixing tubes in the tubing connectors (thread NPT 1/8“) of b.safe Caps.
Fittings, PE, PFAS Analytic
For fixing tubes in the capillary connections of b.safe Caps.
Fittings, PFA, for Caps and Waste Caps
For fixing tubes in capillary connections (thread UNF 1/4" 28G) of b.safe Caps and b.safe Waste Caps.
Fittings, PP, for PFAS analysis
For fixing tubing in the capillary connections. For PFAS analysis of polyfluorinated chemicals according to DIN 38407-42/ DIN 38414-14.
Flanged Tubing, PTFE, PA
Flanged PTFE tubing with black tube end fittings UNF ¼" 28 G made of PP and washers made of PA. The tubing is ready for use. Temperature resistant from 0 to +100 °C, pressure resistant up to 30 bar, universal chemical resistance.
Flexible connecting system for DURAN® GL 45 flasks
For safe transfer of liquid media within a closed and sterile system (evaporation is reduced).Screw closure GL 45 with two, three or four ports GL 14 threadAutoclavableTemperature restistant up to max. 140 °CFlexible modular systemSterile pressure equalisation is possible through use of a membrane filterUnused ports can be provided with a blind cap
Funnels for Safety Waste Caps V3.0, HDPE, electrostatic conductive
Lid with sealing ringWith grounding cable
Holders for capillaries and tubing, ABS
For fixation of capillaries and tubing (up to 8 x O.D. 1,6 mm / 3 x O.D. 3,2 mm or 1 x O.D. 5 mm). With self-adhesive bottom side.
Hose connectors for Waste Caps
For the connection of tubing on b.safe Waste Caps.
Hose connectors for Waste Caps with luerlock connection
For the connection of tubing on b.safe Waste Caps.