pH / conductivity meter SevenDirect™ SD23
The device SD23 is a robust benchtop meter for measuring pH / mV, conductivity, TDS, salinity, resistivity, and temperature.Large 7" touch screen with intuitive user interfaceElectrode arm EasyPlace™ with holder for up to 3 sensorsIntelligent Sensor Management (ISM®) ensures the correct use of the connected sensorAutomatic data transfer to PC or printerAdditional splash protection thanks to removable coverGLP compliantScope of supply: pH / conductivity meter, electrode arm EasyPlace™, protective cover, power supply, get-started-guidepH range:-2.000 ... 20.000Accuracy:±0.002Resolution:0.1 / 0.01 / 0.001Calibration points:1 ... 5mV range:-2000.0 ... 2000.0 mVAccuracy:±0.1 (-500.0 ... 500.0 mV), ±0.2 (-2000.0 ... 2000.0 mV)Resolution:1 / 0.1 mVConductivity:0 µS/cm ... 2000 mS/cmAccuracy:0.5 % of measured valueCalibration points:1 or 2TDS:0.00 mg/l ... 1000 g/lAccuracy:0.5 % of measured valueSalinity:0.00 ... 80.00 psuAccuracy:0.5 % of measured valueResistivity:0.00 ... 100.0 MΩ x cmAccuracy:0.5 % of measured valueTemperature range:-30 ... 130 °CAccuracy:±0.1 (0 ... 100 °C)Resolution:0.1 °CIP code:IP54
pH / conductivity meter SevenDirect™ SD23 Pure H2O-Kit
Meter kits are suitable for measuring the pH value and conductivity of samples and can be used in a wide range of laboratory areas.pH / conductivity meter SD23 with large 7" touch screen and electrode arm EasyPlace™ for mounting and positioning up to 3 sensorspH electrode InLab® Pure Pro-ISM with ARGENTHAL™ reference system and NTC 30 kΩ temperature sensor. The electrode is particularly suitable for samples with a low ion concentrationConductivity sensor InLab® 741-ISM with stainless steel shaft and NTC 30 kΩ temperature sensor. The 2-pole measuring cell made of stainless steel is particularly suitable for measuring samples with low conductivityScope of supply: pH / conductivity meter SevenDirect™ SD23, electrode arm EasyPlace™, pH electrode InLab® Pure Pro-ISM, conductivity sensor InLab® 741-ISM, 3 x 2 calibration buffer sachets pH 4.01, 7.00 and 9.21 or 10.01, 2 conductivity standard sachets 84 µS/cm, protective cover, power supply, get-started-guide
pH / conductivity meter SevenDirect™ SD23-Kit
Meter kits are suitable for measuring the pH value and conductivity of samples and can be used in a wide range of laboratory areas.pH / conductivity meter SD23 with large 7" touch screen and electrode arm EasyPlace™ for mounting and positioning up to 3 sensorspH electrode InLab® Expert Pro-ISM with robust PEEK shaft, integrated NTC 30 kΩ temperature sensor and ARGENTAL™ reference system. The electrode is always ready for use as the solid XEROLYT® reference electrolyte does not need to be refilledConductivity sensor InLab® 731-ISM with epoxy shaft and NTC 30 kΩ temperature sensor. The 4-pole measuring cell made of graphite eliminates polarisation effects and ensures high linearity over a wide conductivity rangeScope of supply: pH / conductivity meter SevenDirect™ SD23, electrode arm EasyPlace™, pH electrode InLab® Expert Pro-ISM, conductivity sensor InLab® 731-ISM, 3 x 2 calibration buffer sachets pH 4.01, 7.00 and 9.21 or 10.01, 2 x 2 conductivity standard sachets 1413 µS/cm and 12.88 mS/cm, protective cover, power supply, get-started-guide
pH / ion meter SevenDirect™ SD50
The device SD50 is a robust benchtop meter for measuring pH / mV, ion concentration, and temperature.Large 7" touch screen with intuitive user interfaceElectrode arm EasyPlace™ places the sensor preciselyIntelligent Sensor Management (ISM®) ensures the correct use of the connected sensorAutomatic data transfer to PC or printerCalibration with up to 5 calibration pointsAdditional splash protection thanks to removable coverGLP compliantScope of supply: pH / ion meter, electrode arm EasyPlace™, protective cover, power supply, get-started-guidepH range:-2.000 ... 20.000Accuracy:±0.002Resolution:0.1 / 0.01 / 0.001Calibration points:1 ... 5mV range:2000.0 ... 2000.0 mVAccuracy:±0.1 (-500.0 ... 500.0 mV), ±0.2 (-2000.0 ... 2000.0 mV)Resolution:1 / 0.1 mVIon concentration:0.00000 ... 999999 % mmol/l, % mol/l, % mg/l, % ppm 0.000 ... 100.000 mmol/l, mol/l, mg/l, ppmCalibration points:1 ... 5Temperature range:-30 ... 130 °CAccuracy:±0.1 (0 ... 100 °C)Resolution:0.1 °CIP code:IP54
pH / ion meter SevenDirect™ SD50 F-Ion-Kit
Meter kits are suitable for measuring the pH value and ion concentration of samples and can be used in a wide range of laboratory areas.pH / ion meter SD50 with large 7" touch screen and 5 point calibrationIon-selective electrode perfectION™ F with epoxy shaft and solid state membrane. Easy and quick cleaning between measurements thanks to Click & Clear™ diaphragmScope of supply: pH / ion meter SevenDirect™ SD50, electrode arm EasyPlace™, Ion-selective electrode perfectION™ F, protective cover, power supply, get-started-guide
pH / ion meter SevenDirect™ SD50 HA-Kit
Meter kits are suitable for measuring the pH value and ion concentration of samples and can be used in a wide range of laboratory areas.pH / ion meter SD50 with large 7" touch screen and 5 point calibrationpH electrode InLab® Routine Pro-ISM with ARGENTHAL™ reference system and NTC 30 kΩ temperature sensor. The particularly robust HA membrane glass is specially designed for use at high pH values and reduces the alkali error that usually occurs to a minimumScope of supply: pH / ion meter SevenDirect™ SD50, electrode arm EasyPlace™, pH electrode InLab® Routine Pro-ISM, 3 x 2 calibration buffer sachets pH 4.01, 7.00 and 9.21 or 10.01, protective cover, power supply, get-started-guide
pH / ion meter SevenDirect™ SD50 Low Vol-Kit
Meter kits are suitable for measuring the pH value and ion concentration of samples and can be used in a wide range of laboratory areas.pH / ion meter SD50 with large 7" touch screen and 5 point calibrationpH electrode InLab® Micro Pro-ISM with ARGENTHAL™ reference system and NTC 30 kΩ temperature sensor. The small shaft diameter (5 mm) enables measurements in small vessels such as vials or cuvettesScope of supply: pH / ion meter SevenDirect™ SD50, electrode arm EasyPlace™, pH electrode InLab® Micro Pro-ISM, 3 x 2 calibration buffer sachets pH 4.01, 7.00 and 9.21 or 10.01, protective cover, power supply, get-started-guide
pH / ion meter SevenDirect™ SD50 Organic-Kit
Meter kits are suitable for measuring the pH value and ion concentration of samples and can be used in a wide range of laboratory areas.pH / ion meter SD50 with large 7" touch screen and 5 point calibrationpH electrode InLab® Science Pro-ISM with ARGENTHAL™ reference system and NTC 30 kΩ temperature sensor. The movable glass sleeve junction can be cleaned easily and thoroughly and facilitates the exchange of the liquid reference electrolyte (3 mol/l KCl)Scope of supply: pH / ion meter SevenDirect™ SD50, electrode arm EasyPlace™, pH electrode InLab® Science Pro-ISM, 3 x 2 calibration buffer sachets pH 4.01, 7.00 and 9.21 or 10.01, protective cover, power supply, get-started-guide
pH / ion meter SevenDirect™ SD50 Pure H2O-Kit
Meter kits are suitable for measuring the pH value and ion concentration of samples and can be used in a wide range of laboratory areas.pH / ion meter SD50 with large 7" touch screen and 5 point calibrationpH electrode InLab® Pure Pro-ISM with ARGENTHAL™ reference system and NTC 30 kΩ temperature sensor. The electrode is particularly suitable for samples with a low ion concentrationScope of supply: pH / ion meter SevenDirect™ SD50, electrode arm EasyPlace™, pH electrode InLab® Pure Pro-ISM, 3 x 2 calibration buffer sachets pH 4.01, 7.00 and 9.21 or 10.01, protective cover, power supply, get-started-guide
pH / ion meter SevenDirect™ SD50-Kit
Meter kits are suitable for measuring the pH value and ion concentration of samples and can be used in a wide range of laboratory areas.pH / ion meter SD50 with large 7" touch screen and 5 point calibrationpH electrode InLab® Expert Pro-ISM with robust PEEK shaft, integrated NTC 30 kΩ temperature sensor and ARGENTAL™ reference system. The electrode is always ready for use as the solid XEROLYT® reference electrolyte does not need to be refilledScope of supply: pH / ion meter SevenDirect™ SD50, electrode arm EasyPlace™, pH electrode InLab® Expert Pro-ISM, 3 x 2 calibration buffer sachets pH 4.01, 7.00 and 9.21 or 10.01, protective cover, power supply, get-started-guide
pH / mV / °C Meter Eutech™ pH6+ / pH5+ series
The pH6+ and pH5+ offer you the greatest value-for-money for your basic pH measurement needs. Both meters measure pH and temperature, the pH6+ aditionally measures mV / ORP. Rugged and user-friendly, these meters come with rubber boots for protection against harsh field elements.3-point-calibration with auto-buffer recognitionAutomatic temperature compensation (ATC)Scope of delivery: Meter with Rubber Armour/Stand, plastic carrying case (except pH601+ and pH501+)SpecificationspH range:0.00 ... 14.00 pHResolution:0.01 pHAccuracy:±0.01 pHpH calibration points:1 ... 3 pointsmV range (pH6+ only):±1000 mVAccuracy:±0.2 mVTemperature range:0.0 ... 100.0 °CResolution:0.1 °CAccuracy:±0.5 °CDimensions (W x L x H): Weight:85 x 157 x 42 mm 255 gPower supply:4 x 1.5 V AAA alkaline batteries, 200 hIP code:IP 54Warranty:3 years on the meter
pH and redox electrodes HA405
Low-maintenance combination electrodes for continuous pH and redox measurements, with pre-pressurised gel electrolyte. Suitable for applications in the chemical industry as well as for water and waste water treatment.With silver ion barrierAlso suitable for rough process conditions up to 2.5 bar gauge pressureReference system: Argenthal®
pH and redox meter ProfiLine pH 3110
The WTW ProfiLine, hand-held, pH/mV meters are robust and waterproof, according to IP67. Make testing of pH and redox potential simple. Easy operation virtually eliminates errors. All function keys of the 3110 can be operated even when wearing gloves; automatic calibration and AutoRead functions ensure stable and reproducible results. The multifunctional display for pH, mV and temperature is always easy to read. The proven DIN socket for connecting pH electrodes permits pH measurement even in wet environments. The instruments can be operated by standard alkaline or rechargeable batteries.Scope of supply: pH/mV meter, case, buffer solution STP 4 and STP 7, 3 mol/l KCl, quick start guide, CD-ROM, batteries
pH and redox meter ProfiLine pH 3110 Set 2
The WTW ProfiLine, hand-held, pH/mV meters are robust and waterproof, according to IP67. Make testing of pH and redox potential simple. Easy operation virtually eliminates errors. All function keys of the 3110 can be operated even when wearing gloves; automatic calibration and AutoRead functions ensure stable and reproducible results. The multifunctional display for pH, mV and temperature is always easy to read. The proven DIN socket for connecting pH electrodes permits pH measurement even in wet environments. The instruments can be operated by standard alkaline or rechargeable batteries.Scope of supply: pH/mV meter, case, pH electrode SenTix® 41, buffer solution STP 4 and STP 7, 3 mol/l KCl, stand, beaker, quick start guide, CD-ROM, batteries
pH buffer solutions
Clear, Colourless pH Buffer Solutions. Tested and ISO17025 Certified at 20 °C, supplied with a detailed Certificate of Analysis which outlines traceability to N.I.S.T. Temperature dependence data is printed on the label as are lot numbers and expiry dates. Containers made of HDPE.* Phthalate free
pH Buffer Solutions
Clear, Colourless pH Buffer Solutions. Tested at 25 °C and certified by Reagecon's ISO 17025 AccreditedTest Method. NIST traceable and presented in various pack sizes.
pH buffer solutions
Technical, NIST/DIN and certified buffer solutions for calibrating pH electrodes.Tolerance: ± 0.02 pH
pH buffer solutions
Disposable bags for effective calibration. Traceability according to NIST.
pH buffer solutions
Ready-to-use. pH 4, 7 and 9. pH values at 25 °C. Tolerance ± 0.02 pH.
pH buffer solutions
For accurate and reproducible calibration of pH meters and pH electrodes.Colour-codedNIST™-traceable standard reference materialsBottles of 475 ml
pH buffer solutions at 20 °C, certified reference material (CRM)
Certified reference material according to ISO 17034. The pH buffer solutions are colour-coded and the uncertainty of measurement of ±0.01 pH was tested at 20 °C. Supplied with detailed certification report which includes traceability to NIST. Lot numbers and expiry dates are printed on the label.
pH buffer solutions at 25 °C, certified reference material (CRM)
Certified reference material according to ISO 17034. The pH buffer solutions are colour-coded and the uncertainty of measurement of ±0.01 pH was tested at 25 °C. Supplied with detailed certification report which includes traceability to NIST. Lot numbers and expiry dates are printed on the label.
pH buffer solutions CYP20
pH buffers for the daily and high-precision calibration and adjustment of pH electrodes.Accuracy (±0.02) and reproducibility help to optimise the pH value and thus increase product quality and yieldTraceable to NIST and PTB standard reference material