Oxygen meter inoLab® Oxi 7310 Set 4
Reliable Documentation for dissolved oxygen measurement: This is the inoLab® Oxi 7310 or inoLab® Oxi 7310P. A modern backlit graphic display with menu controlled user interface allows easy and intuitive operation. The mini USB-B interface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing and the keypad are easy-to-clean. The inoLab® Oxi 7310 supports the long proven WTW galvanic sensors, CellOx® 325 and StirrOx® G. A calibration history of the 10 last calibrations allows conclusions on the state of the sensor. Calibrations versus external standards e.g. Winkler titration, are possible, too. The meter includes automatic barometric pressure and temperature compensation.Scope of supply: Device, oxygen sensor StirrOx® G, electrolyte, abrasive foil, replacement membrane caps, universal power supply, stand, operating instructions, CD-ROM with software, USB cable
Oxygen meter inoLab® Oxi 7310P
Reliable Documentation for dissolved oxygen measurement: This is the inoLab® Oxi 7310 or inoLab® Oxi 7310P. A modern backlit graphic display with menu controlled user interface allows easy and intuitive operation. The mini USB-B interface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing and the keypad are easy-to-clean. The inoLab® Oxi 7310 supports the long proven WTW galvanic sensors, CellOx® 325 and StirrOx® G. A calibration history of the 10 last calibrations allows conclusions on the state of the sensor. Calibrations versus external standards e.g. Winkler titration, are possible, too. The meter includes automatic barometric pressure and temperature compensation.The built-in thermal transfer printer with long-lasting printouts ensures immediate documentation of the measured data.Scope of supply: Device with printer, universal power supply, stand, operating instructions, CD-ROM with software, USB cable
Oxygen meter Orion™ Pro Star DO213
Meter for accurate and reliable analysis of dissolved oxygen, barometric pressure and temperature. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections and electrode stand assembly. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesSelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 2-point calibration (oxygen saturation, temperature)1-point calibration (oxygen concentration, barometric pressure)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: Oxygen meter, electrode stand, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
Oxygen meter Orion™ Pro Star DO213, BOD kit
Meter for accurate and reliable analysis of dissolved oxygen, barometric pressure and temperature. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections and electrode stand assembly. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesSelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 2-point calibration (oxygen saturation, temperature)1-point calibration (oxygen concentration, barometric pressure)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: Oxygen meter, electrode stand, AUTO-STIR polarographic BOD DO/ATC electrode with calibration sleeve (086030MD), polarographic DO electrode maintenance kit, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
Oxygen meter Orion™ Pro Star DO213, optical DO kit
Meter for accurate and reliable analysis of dissolved oxygen, barometric pressure and temperature. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections and electrode stand assembly. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesSelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 2-point calibration (oxygen saturation, temperature)1-point calibration (oxygen concentration, barometric pressure)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: Oxygen meter, electrode stand, optical DO/ATC electrode with calibration sleeve, guard and optical cap (087010MD), USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
Oxygen meter Orion™ Pro Star DO213, standard DO kit
Meter for accurate and reliable analysis of dissolved oxygen, barometric pressure and temperature. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections and electrode stand assembly. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesSelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 2-point calibration (oxygen saturation, temperature)1-point calibration (oxygen concentration, barometric pressure)Up to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: Oxygen meter, electrode stand, polarographic DO/ATC electrode with calibration sleeve (083005MD), polarographic DO electrode maintenance kit, BOD adapter, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
Oxygen meter SD 315 Oxi
The portable hand-held measuring instrument SD 315 Oxi meets the daily requirements for a robust and reliable instrument for the determination of dissolved oxygen in aqueous media. The Clark oxygen sensor with integrated temperature probe enables immediate measurements without time-consuming run-in time (polarisation time).Simple calibration against air or according to DIN EN ISO 5814Alarm function with adjustable limitsAutomatic pressure and temperature compensationAuto Hold FunctionAutomatic switch-off individually selectable from 1 to 120 minBacklit LCD displaySensor status display in % after each calibrationSalinity correctionParameter: dissolved oxygen (O2), O2 concentration in mg / l, O2 saturation in %, temperature in °C / °FBattery status indicatorFlexible stand at the rear allows the unit to be set up or fastened to a belt.Data transfer and evaluation via software possibleScope of supply: Instrument, protective covering, electrode holder, carrying case, galvanic oxygen sensor, KOH refill electrolyte, spare membrane, calibration bottle with sponge, batteries, manualSpecificationsO2 concentration:0.0 ... 70.0 mg/lO2 saturation:0.0 ... 600.0 %Temperature:0.0 ... 50.0 °CMemory:10000 data sets automatically 1000 data sets manuallyDimensions (W x D x H):164 x 100 x 37 mmWeight:302 gPower supply:2 x AAAIP code:IP 67
Oxygen meter SD 400 Oxi L
Oxygen meter for use in sewage and water works, research and teaching as well as in aquaristics. High measuring accuracy and low maintenance, thanks to luminescence technology no electrolyte solution is required. The SD 400 Oxi L is ideally suited for the determination of "dilution BOD" due to the optimized probe for standard BOD bottles.Especially high measuring accuracy by luminescence technologyShort response time of the oxygen probeLow maintenance due to long-lasting oxygen probe and membrane headInflow to the oxygen probe is not necessary, the use of stirrers or manual stirring is no longer requiredIncludes software for extended and simplified data management with data logger functionBacklit LC display for dark environmentsScope of supply:SD 400 Oxi L (Set 1): Meter with 4 (AA) batteries, optical oxygen probe with 1.5 m cable, storage/calibration bottle, micro SD card with calibration data, software and manual (on Micro SD card), short manual, lanyard in caseSD 400 Oxi L (Set 2): as Set 1 but with optical oxygen probe with 3 m cableSD 400 Oxi L (Set 3): as Set 2 but with optical oxygen probe with 10 m cableSpecificationsO2 concentration: Resolution:0 ... 50 mg/l 0.01 mg/lO2 saturation: Resolution:0 ... 500 % 0.1 %O2 accuracy: 0 ... 200 % or 0 ... 20 mg/l: 200 % or 20 mg/l: ± 1,0 % or ± 0,1 mg/l, larger value applies ± 10 %O2 partial pressure: Resolution: Accuracy:51 ... 112 kPa 0.1 kPa ± 0.2 %Probe temperature: Resolution: Accuracy :-5 ... 50 °C 0.1 °C ± 0.2 °CMemory:Micro SD card, 1 GB, saving of over 10000 datasetsPower supply:Micro USB or 4 x AA batteriesDimensions (L x W x D):162 x 98 x 54 mmWeight:Approx. 314 gIP code:IP 67
Oxygen sensor DurOx® 325
For use with Oxi 3xxi, ProfiLine Oxi 1970i, ProfiLine 3205, 3210, 3310.Membrane-covered oxygen sensor with low flow requirement and removable cage guard, for field applications (fish farm revival pools) and for educational purposes.Ready to measure - no polarisation timeIMT compensation via two integral temperature sensorsService life with one electrolyte filling approx. 6 monthsMinimal flow requirementNo zero currentSensor is watertight (IP 68 - 2)Standard with 3m cable and watertight plugStandard with calibration/storage vessel OxiCal® -DStandard with cage guard SK-D
Oxygen sensor InLab® 605 / InLab® 605-ISM
Sensor for polarographic oxygen measurement with high accuracy and repeatability. For use in laboratory, field and industry. Robust construction. Diaphragm mechanically protected by steel mesh, shaft made of glass-fibre reinforced PPS. With integrated temperature sensor.InLab® oxygen sensors are designed for use with the SevenExcellence™ multi-channel tabletop meter and the portable SevenGo™ 6 metersInLab®-ISM oxygen sensors are equipped with Intelligent Sensor Management, which enables simple calibration in the air and permanent monitoring of the sensor statusDesigned for use with the SevenExcellence™ multi-channel tabletop meter and the portable SevenGo™ 68 dual-channel instruments.
Oxygen sensor StirrOx® G
For inoLab® Oxi 730, ProfiLine 197i/1970i, inoLab® 740 Oxi, inolab Oxi 7310. Self-stirring oxygen sensor.Single-handed useHigh reproducibilityReady for immediate use, no polarisation period necessaryExtremely low internal consumption of oxygen by the electrodeNo zero point calibration necessary6 months operation with one electrolyte fillingIMT function compensationMembrane leakage monitoring, damaged membranes are indicatedScope of supply: Oxygen sensor, OxiCal®-ST calibration and storage vessel, 3 exchange membrane heads, electrolyte, abrasive foilPlease order cleaning solution separately.
Paddle probe, thermocouple, SMP connection
Stainless steel paddle probe with silicone cable and SMP connection for measuring the temperature of plastic masses, fluids, air, and surfaces. Paddle dimensions: 40 x 7 x 0.35 mm.
Pallet scale UFC, IoT-Line
Thanks to rechargeable battery operation (optional), compact, lightweight construction, it is suitable for the use in several locations. Data and control commands can be exchanged through the KERN Universal Port KUP) using one interface, which can be connected to the housing, or through three parallel interfaces using the KUP Extension box. A visual and audible signal assists the rapid checking of items on palettes.Large backlit LCD displayWith Real Time ClockLoad support: steel, powder coated4 load cells, alloy steel, silicone-coated, protection against dust and water splashes IP67With 2 wheels for easy transportationDimensions of display device (WxDxH): 220×145×65 mmScope of supply: Pallet scale, protective working cover
Pallet scale UIB
Thanks to battery operation, compact, lightweight construction, it is suitable for the use in several locations.Large LCD displayLoad support: steel, powder coated4 silicone-coated aluminium load cells, protection against dust and water splashes IP67With rollers and a handleDimensions of display device (WxDxH): 235×114×51 mmScope of supply: Pallet scale, protective working cover
Pallet scale UID
The KERN Communication Protocol (KCP) permits searching and remote control of the balance using external control devices or computers. Thanks to interfaces such as RS-232 or USB, WiFi, Bluetooth, Ethernet (optional), the scale can easily be connected to existing networks.Large LCD displayHigh mobility thanks to rechargeable battery operation (optional)Load support: steel, powder coated4 load cells, alloy steel, silicone-coated, protection against dust and water splashes IP67With rollers and a handleDisplay device: Protection against dust and water splashes IP65Dimensions of display device (W×D×H): 268×115×80 mmScope of supply: Pallet scale, protective working cover
PC-Software SCD-4.0
Flexible recording or transfer of measurements, particularly to Microsoft® Excel or AccessFor operating systems Windows XP, Vista, 7, 8, 8.1, 10Supports balances measuring devices with RS 232, RS 485, Bluetooth, LAN or WLAN network (TCP/UDP/IP)Highly flexible formattingThe interface protocols for KERN balances are already predefined (standard configuration)Compatible interface cable included when ordering a KERN balance at the same timeGLP-compliant lab software
PDF data logger LOG40
PDF data logger with display for recording, alarming as well as visualization of temperature and with external sensors also of relative humidity and pressure. Ideal for monitoring and documenting measured values during transport and storage. The data logger is pre-programmed and can be used without software. Changes or creation of configuration parameters (e.g. measuring interval, alarm limit values, and start parameters) can be made with the free software LogConnect.Incl. calibration certificateAutomatic output as PDF and Excel fileUSB interface for connection to a PCMemory for 40000 data recordsRecording interval adjustable (1 s to 24 h)Temperature accuracy ±0.5 °C at -10 to 60 °CMax-Min values are shown in the display (resettable)Movement sensor documents shocksStatus and alarm LEDs with signal tone (buzzer)HACCP-compliant acc. to DIN EN12830Scope of supply: PDF data logger, 2 x AAA batteries, USB protection cap, mounting kitOptionally, external sensors for measuring relative humidity and pressure can be connected to the data logger via the USB port. Please order separately.
Penetration electrode AT 206 for pH meter PHT 810
Penetration electrode AT 206 for measurements in semi-solid food stuff and other materials.
Penetration probe with ribbon cable, thermocouple type K
Temperature probe with penetration tip for measurements in pastes and semi-solid media, as well as in liquids and air. The thin ribbon cable can be placed through narrow openings such as door slots or refrigerator seals.
Penetration probe, thermocouple, Lemo connection
Penetration probe with silicone cable and Lemo connection for measuring the temperature of viscoplastic masses.
Penetration probe, thermocouple, SMP connection
Penetration probe with silicone cable and SMP connection for measuring the temperature of viscoplastic masses.
Penetration/infrared thermometer testo 104-IR BT
Penetration thermometer with integrated infrared sensor for quick and easy determination of surface and core temperature in the food sector. Suitable for checks as part of HACCP processes. The infrared measuring device is equipped with a 2-point laser with 10:1 optics. The penetration probe is securely stowed on the device and activates automatically when it is folded out. Operation is simple and intuitive. Measurement results can be easily read on the large display. With freely adjustable emissivity. Seamless, digital documentation is possible via the testo Smart App connection. All measurement values are automatically transferred to the testo Smart App via Bluetooth®. For regulatory requirements and internal quality assurance, data can be exported or professional reports can be created in PDF format (incl. signature & comment function). The penetration/infrared thermometer is watertight (IP65), EN 13485 certified, and HACCP-compliant.Scope of supply: Penetration/infrared thermometer, batteries, instruction manual, calibration protocol