Laboratory thermometer set TFX 420, with temperature probe TPX 400-150
Robust and impact resistant temperature measurement device for Pt 1000 penetration probe (connection Lemo size 0). TFX 420 with MIN, MAX, and Hold function. For control measurements in laboratories, food sector, storage, and incoming goods. For temperature determination of air, liquids, plastic substances, and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate.Robust and impact resistant temperature measurement device for Pt 1000 penetration probe (connection Lemo size 0). TFX 420 with MIN, MAX, and Hold function. For control measurements in laboratories, food sector, storage, and incoming goods. For temperature determination of air, liquids, plastic substances, and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate.
Laboratory thermometer set TFX 420, with temperature probe TPX 440
Robust and impact resistant temperature measurement device for Pt 1000 penetration probe (connection Lemo size 0). TFX 420 with MIN, MAX, and Hold function. For control measurements in laboratories, food sector, storage, and incoming goods. For temperature determination of air, liquids, plastic substances, and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate.Robust and impact resistant temperature measurement device for Pt 1000 penetration probe (connection Lemo size 0). TFX 420 with MIN, MAX, and Hold function. For control measurements in laboratories, food sector, storage, and incoming goods. For temperature determination of air, liquids, plastic substances, and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate.
Laboratory thermometer TFX 410
Laboratory thermometer with assigned Pt 1000 probe. For control measurements in laboratories, food sector, storage, and incoming goods. For temperature determination of air, liquids, plastic substances, and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate.
Laboratory thermometer TFX 410-1, without temperature probe
Robust and impact resistant temperature measurement device for Pt 1000 penetration probe (connection Lemo size 0). For control measurements in laboratories, food sector, storage, and incoming goods. For temperature determination of air, liquids, plastic substances, and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate.Robust and impact resistant temperature measurement device for Pt 1000 penetration probe (connection Lemo size 0). For control measurements in laboratories, food sector, storage, and incoming goods. For temperature determination of air, liquids, plastic substances, and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate.
Laboratory thermometer TFX 420, without temperature probe
Robust and impact resistant temperature measurement device for Pt 1000 penetration probe (connection Lemo size 0). TFX 420 with MIN, MAX, and Hold function. For control measurements in laboratories, food sector, storage, and incoming goods. For temperature determination of air, liquids, plastic substances, and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate.Robust and impact resistant temperature measurement device for Pt 1000 penetration probe (connection Lemo size 0). TFX 420 with MIN, MAX, and Hold function. For control measurements in laboratories, food sector, storage, and incoming goods. For temperature determination of air, liquids, plastic substances, and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate.
Laboratory Thermometer TFX 422C
PTB approvedRobust and impact resistantHigh accuracyWaterproof IP 67Approx. 5 years battery lifeAccording to EN 13485With fixed Pt 1000 probe
Laboratory thermometers
Suitable for official calibration. Enclosed scale type. Richter seal with button. Red spirit filled with uncoated capillary. Total immersion.
Laboratory thermometers, enclosed form
Laboratory thermometers with gallium filling.Capillary prismatic colourlessRichter-top finish with buttonSuitable for government verificationImmersion depth: total
Leeb hardness tester, mobile
The Leeb hardness tester measures metallic samples and offers mobility and flexibility compared to stationary tabletop devices and testing devices with internal sensor.External impact sensorAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to 600 data groupsMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (Type A, B, C), Vickers (HV), Shore (HS), Leeb (HL), Brinell (HB)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsMeasuring with tolerance range (limit-setting function):Upper and lower limiting can be programmedAcoustic and visual signalMatrix display: Backlit multi-function displayRobust metal housingScope of supply:HK-D: Mobile Leeb hardness tester, hard carrying caseHK-DB: Mobile Leeb hardness tester, hard carrying case, standard block for calibration, hardness approx. 800 HLD
Leeb hardness testers, mobile, HMM, with printer
Advanced features for demanding applications.Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness values.External impact sensor (Type D) includedAutomatic recognition of the impact (rebound) sensor connected to the HMMMobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibilityAll measurement directions possible (360°) thanks to an automatic compensation functionStandard block for calibration included (approx. 790 ± 40 HL)Internal memory for up to 9 data groups, with up to 9 values per group forming the average value of the groupMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsDelivered in a hard carrying caseWireless IR printer included for on-site printing of measurement protocols (battery operated)
Leeb hardness testers, portable, HMM
Advanced features for demanding applications.Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness valuesAutomatic recognition of the impact (rebound) sensor connected to the HMMMobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibilityAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to 9 data groups, with up to 9 values per group forming the average value of the groupMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsAUTO-OFF function, battery level indicatorScope of supply:Leeb hardness tester, external impact sensor, standard block for calibration (approx. 790 ± 40 HL), carrying case
Leeb hardness testers, portable, HMO
Portable Leeb hardness tester for professional applications.Innovative touchscreenAutomatic recognition of the impact (rebound) sensor connected to the HMOAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to measurementsMini statistics function: Displays the measure value, the average value, the difference between the maximum and minimum values, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsRechargeable battery operationUSB interface for connection to the printer and charging the batteriesScope of supply:Leeb hardness tester, carrying case, standard block, mains adapter
Leeb hardness testers, portable, HN-D
Pen type hardness testing device in accordance with Leeb testing for mobile hardness testing of metals.LCD displayAll measurement directions possible (360°) thanks to an automatic compensation functionInternal impact sensor (Type D)Internal memory for up to measurements with date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL)Rechargeable battery operationData interface USBScope of supply:Leeb hardness tester, carrying case, USB interface cable, mains adapter
Light measuring instrument SO
Light measuring instrument for precise light measurement up to 200,000 LuxMeasures illumination in the workplaceHelps to determine whether a workstation has insufficient light or whether there is too much lightPhoto sensor: silicon diodeCosine correction for angular incident lightSturdy protective cover for the photo sensorIncreased service life: Impact protection through a protective casingTrack function for continuous recording of variable environmental conditionsPeak Hold Mode to capture peaksSelectable measuring units: fc (foot-candle), lxAUTO-OFF functionDelivery in a robust box
Light measuring instrument SP
For measuring illumination of office and production workstations.Photo sensor: Silicon diode, filteredCosine correction for angular incident lightData-hold function, to freeze the current measurementRotating sensor unit (+ 90 and -180°) for optimum alignment to the light sourceTRACK function for continuous recording of variable environmental conditionsPeak Hold Mode to capture peaksSelectable measuring units: fc (foot-candle), lxBattery operationScope of supply:Light measuring instrument, soft box with light protection, 9 V block
Light measuring instrument testo 540
Quick and easy-to-use instrument for measuring lighting conditions in the workplace. The sensor is adapted to spectral sensitivity of the eye.Display illuminationHold-functionMax./min. valuesScope of supply: Meter incl. protection cap, batteries, calibration protocol
Litmus paper
Litmus paper, available in blue, red and neutral. Supplied in booklets of 100 strips, 10 x 70mm W x L.Also available as reel. Refill packs available separately.
LLG-Conductivity Solutions
Values stated at 25°C: Accuracy ±1%Directly traceable to NISTCertificate including actual value, expiration date and uncertainty of measurementThe safety data sheets of these products are available under www.llg-labware.com.
LLG-Digital pocket themometer Type 12080
Waterproof. With hold function and Max/Min function. Probe made of stainless steel, with protective plastic sleeve, with battery 1 x 1.5 V (LR44). Overall dimensions (L x W): 195 x 50 mm.
LLG-Digital pocket themometer Type 12090
Waterproof. With hold function. Probe made of stainless steel, with protective plastic sleeve, with battery 1 x 1.5 V (LR44). Overall dimensions (L x W): 185 x 30 mm.
LLG-Dual-Timer, 2-channel
The LLG-Dual-Timer offers two separate timers in one instrument. One fixed time can be stored per channel.Big 6-digit LCD displayDigital stopwatch (counting up)Short timer (counting down)With memory functionStopwatch with tenths of a secondStopwatch and countdown up to 99 h 59 min. 59 secOptical (red LED) and acoustic alarm (2 volume levels), when timer expiresIncl. magnet for mounting, hanging bracket and stand (fold-out)2 x 1.5 V AAA batteries not included
LLG-Electrode stand for 3 electrodes
With cable duct. For three electrodes, 3 openings with diam. 16 mm. Additional opening for temperature sensor. Three joints for high flexibility and adjustment options.
LLG-Electrolyte solutions, KCl
Potassium chloride electrolyte for pH electrodes - Filling solution for reference electrolyte.The safety data sheets of these products are available under www.llg-labware.com.
LLG-Exact-Temp Standard thermometers, red spirit-filled
For monitoring critical temperature conditions in deep freezes, refrigerators, cold rooms, blood bank refrigerators, incubators and warming chambers.thermometer certifiable to National Standardssupplied with works test certificatethermometer stem safely encapsulated in PTFEeach thermometer is mounted in a square-shaped shatter-proof plastic bottle filled with a liquid to ensure accurate readings despite the opening and closing of instrument doors.each thermometer has an individual serial number.* >100 °C: ± 3.0 °C