Digital force gauge FL-M
For tensile and compressive force measurement with external measuring cell.Graphics display with backlightPeak Hold ModeMetal housingCan be mounted on all SAUTER test standsCapacity display: A bar lights up to show how much of the measuring range is still availableMeasuring with tolerance range (limit-setting function)Internal memory for up to 500 measurementsContinuous analogue outputData interface RS-232, USBRechargeable battery operationScope of supply:Force gauge, carrying case, tension loops, mains adapter
Digital force gauge FL-S
Universal digital force gauges with integrated measuring cell.Turnable display with backlightCan be mounted on all SAUTER test standsMetal housingSelectable measuring units: N, kN, kg, oz, lbReal time or Peak Hold Mode to observe transcients or capture peaksCapacity display: A bar lights up to show how much of the measuring range is still availableMeasuring with tolerance range (limit-setting function):Upper and lower limiting can be programmed, in pull and push direction. The process is supported by an acoustic and visual signalInternal memory for up to 500 measurementsContinuous analogue output: Linear voltage signal in relation to the load (-2 up to +2 V)Scope of supply: Digital force gauge, hard carrying case, 3 standard attachments (FL 2K: with external measuring cell, tension loops and pressure plates, without standard attachments)
Digital force gauge FS
Force gauge with integrated measuring cell for tensile and compressive force measurement. If an external measuring channel is used, the internal load cell is deactivated as long as an external load cell is connected. Suitable for 4-wire and 6-wire sensors with strain gauges.3,5" touchscreenSimultaneous measurement on up to four channelsTwo-point adjustment with weights or numerical adjustment possibleExternal sensor data is stored directly in the connectorUSB interface for programming, data transfer and power supplyIntegrated SD card memoryTolerance functionTRACK function for continuous display of the measurementPeak value measurementRechargeable battery operationCan be mounted on all SAUTER test standsScope of supply:Force gauge, system case (systainer® T-LOC), plug-in power supply, USB cable type C
Digital hand held thermometer TTX 200
For measuring the core temperature with fixed probe with cable and handle.Very large display with large figuresEasy handling, easy to readReplaceable batteryFactory calibration certificate
Digital hand held thermometer with cable probe Type 13010
Cable probe with penetration tip°C/°F selectionAutomatic deactivation after 60 minScope of supply: Thermometer with cable probe, clip, magnet
Digital insertion thermometer
Waterproof thermometer with penetration probe for quick and accurate temperature control. Versatile use, also well suited for professional use in industry, trade, commerce, and laboratories.Penetration probe 105 mmOn/off switchHold, max/min function with dynamic updateT90 measuring time approx. 8 sec.Automatic switch-off with long-term measuring functionWith plastic case and clipHACCP and EN 13485 compliantWaterproof thermometer with penetration probe for quick and accurate temperature control. Versatile use, also well suited for professional use in industry, trade, commerce, and laboratories.Penetration probe 105 mmOn/off switchHold, max/min function with dynamic updateT90 measuring time approx. 8 sec.Automatic switch-off with long-term measuring functionWith plastic case and clipHACCP and EN 13485 compliant
Digital Insertion thermometer P200
For temperature control of liquid, paste-like and semi-solid materials.Large displayMAX-MIN-HOLD function°C/°F switchableAutomatic switch-off after approx. 15 min.Sensor length: 110 mmProtected against water jetsHACCP-compliantScope of supply: Insertion thermometer, batteries, operating manual
Digital insertion thermometer Type 12200
Waterproof. With hold function and Max./Min. function. Penetration probe made of stainless steel, with 1 m cable and handle. With battery.
Digital insertion thermometer, with ISO calibration certificate
Waterproof thermometer with penetration probe for quick and accurate temperature control. Versatile use, also well suited for professional use in industry, trade, commerce, and laboratories.Penetration probe 105 mmOn/off switchHold, max/min function with dynamic updateT90 measuring time approx. 8 sec.Automatic switch-off with long-term measuring functionWith plastic case and clipHACCP and EN 13485 compliantWaterproof thermometer with penetration probe for quick and accurate temperature control. Versatile use, also well suited for professional use in industry, trade, commerce, and laboratories.Penetration probe 105 mmOn/off switchHold, max/min function with dynamic updateT90 measuring time approx. 8 sec.Automatic switch-off with long-term measuring functionWith plastic case and clipHACCP and EN 13485 compliant
Digital Maxima-Minima-Thermometer
Digital thermometer, wall hanging, for indoor or outdoor use. With blue, splash-proof casing, selectable °C/°F ranges and battery.
Digital Maxima-Minima-Thermometer, calibrated, with certificate
Digital thermometer, wall hanging, for indoor or outdoor use. With blue, splash-proof casing, selectable °C/°F ranges and battery.
Digital Maxima-Minima-Thermometers Type 13000 without bottle
Digital thermometers to monitor freezers, refrigerators and incubators.Min./Max. memory and Hi/Low alarmWith folding stand
Digital Maxima-Minima-Thermometers Type 13050
Digital thermometer for simultaneous monitoring of freezers and refrigerators. With 2 temperature sensors, built-in 5 ml plastic bottle, filled with ethylene glycol/water for measuring delay/alarm lag when door is opened.With date/time memory°C/°F selection, min/max memoryTime display: 24 hours, date display: day/month/yearCertified at 0 °C, accuracy: ±1 °CScope of supply: Thermometer with 2 temperature sensors, folding stand, 2 magnets
Digital min./max. indoor/outdoor thermometer with sensor
Digital thermometer with temperature alarm and waterproof outdoor sensor.Two-tier LCD, max./min. temperature, switchable to °FAccuracy: ±1 °C (0 to 50 °C), otherwise ±2 °CIncl. battery: 1 x 1.5 V AAA
Digital Min./max. thermometer with outdoor sensor MOXX
For monitoring indoor and outdoor temperature.Max. and min. values with manual resetWaterproof outdoor sensorFor hanging and standingAccuracy: ±1 °C (0 to 50 °C), otherwise ±2 °CScope of supply: Min./max. thermometer, battery, operating manual
Digital Min/Max Thermometer with sensor
Digital thermometer with extra large LCD.measurement of a second temperature (e.g. outside temperature) via cablehigh and low values with manual resetto hang or place (with fold-out stand)cable length approx. 300 cm
Digital mini thermometers
Rapid response with good accuracy. Small and convenient for field use. Can be used as dipping / insertion thermometer with protective cover for probe or as a surface thermometer with 1.6 mm diameter measuring tip. With battery.
Digital pocket themometer LabTherm
Watertight, ergonomic shaped pocket thermometer with robust insertion tip. The long sensor tube is particularly suitable to measure in liquids, food etc.Wide measuring rangeHigh accuracyWatertight IP671-second measuring intervalMAX-/MIN-/HOLD-functionDisable Auto-OFF-function°C/°F-switchable0 °C adjustment functionHACCP conformity, acc. to EN 13485Scope of supply: Thermometer incl. protective cover, pocket clips
Digital pocket themometer ThermoJack
Foldable pocket themometer, watertight. Ideal for measuring foods (acc. to EN13485), liquids etc.
Digital pocket themometer ThermoJack PRO
Foldable pocket themometer, watertight. Ideal for measuring foods (acc. to EN13485), liquids etc. ThermoJack PRO with calibration certificate.
Digital pocket thermometer TDC 200
Large illuminated displayAdjustable limit values; visual and acoustic alarmHold- and auto-off functionExchangeable probeFixed probe, pointedExchangeable batteries
Digital pocket thermometer TLC 700
The practical folding thermometer TLC 700 is suitable for measuring the core temperature during transport, storage and receiving of goods. Thanks to the foldable penetration probe the waterproof thermometer (IP 65) can be stored safely. The device is primarly characterized by its small size and the large display and comes with a calibration certificate.
Digital probes for climate measuring instrument testo 440
Digital probes with intelligent calibration concept. Integrated, extendable telescope enables convenient measurement.
Digital Pt100 immersion/penetration probe for testo measuring instruments
Digital immersion/penetration probe with long-term stable Pt100 temperature sensor for measurements in liquid and pasty media. Ideal for use in the laboratory, in industry, and food control.Measured values can be stored by pressing the button on the meterIntelligent calibration concept with zero-error display