DAkkS certificates for milligram calibration weights E1
For all available E1 milligram weights.
DAkkS certificates for milligram calibration weights E2
For all available E2 milligram weights.
DAkkS certificates for milligram calibration weights F1
For all available F1 milligram weights.
DAkkS certificates for weight sets E1, cylindrical
Initial calibration. For all available E1 weight sets in cylindrical shape.Recalibration also available.
DAkkS certificates for weight sets E2, cylindrical
For all available E2 weight sets in cylindrical shape.
Data Logger LOG32T
Data logger with integrated USB interface for temperature recording. Ideal for monitoring storage and transport conditions in accordance with HACCP (EN 12830).Incl. calibration certificateMemory for 60 000 readingsUsable without software (pre-programmed 15-minute reading interval)Freely adjustable memory interval from 30 seconds to 24 hours (via free Log Connect software)Automatic output as PDF file (logger is recognized like USB memory stick)Battery lifetime > 3 years (with recording interval >15 minutes)Status and alarm LEDs with acoustic signal (buzzer)Wall mount includedEN12830 compliantIP65 waterproof
Data logger LOG32THP
Temperature-humidity-pressure logger with integrated USB-interface and automatic PDF-creation.Incl. calibration certificateMemory for 3 x 60000 readingsUseable without software (pre-programmed reading interval of 5 minutes)Automatic output as PDF file (no drivers required)Free adjustable recording interval from 30 seconds up to 24 hours (via Software Log Connect)Battery life > 2 years (with recording interval >15 minutes)Status and alarm LEDsWith wall mount, fixing screws, an battery (1/2 AA, 3.6 V)
Data Logger with external temperature sensor EBI 20-TE1
Applications:TransportStorage monitoringRefrigeration areas and cold roomsFeatures:WaterproofVisual alarmMax/min values on displayStores 40000 readings, can be read off at any timeReplaceable batteryMeasuring mode: immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressedAccuracy: ±0.5 °C (-20 to 40 °C); ±0.8 °C for remaining measuring rangeScope of supply: Temperature Logger with external sensor
Data Logger with external temperature sensor EBI 20-TE1-Set
Applications:TransportStorage monitoringRefrigeration areas and cold roomsFeatures:WaterproofVisual alarmMax/min values on displayStores 40000 readings, can be read off at any timeReplaceable batteryMeasuring mode: immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressedAccuracy: ±0.5 °C (-20 to 40 °C); ±0.8 °C for remaining measuring rangeScope of supply: Temperature Logger with external sensor, evaluation software, Interface
Data Logger with internal temperature sensor EBI 20-T1
Applications:TransportStorage monitoringRefrigeration areas and cold roomsFeatures:WaterproofVisual alarmMax/min values on displayStores 40000 readings, can be read off at any timeReplaceable batteryMeasuring mode: immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressedAccuracy: ±0.5 °C (-20 to 40 °C); ±0.8 °C for remaining measuring rangeScope of supply: Temperature logger
Data Logger with internal temperature sensor EBI 20-T1-Set
Applications:TransportStorage monitoringRefrigeration areas and cold roomsFeatures:WaterproofVisual alarmMax/min values on displayStores 40000 readings, can be read off at any timeReplaceable batteryMeasuring mode: immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressedAccuracy: ±0.5 °C (-20 to 40 °C); ±0.8 °C for remaining measuring rangeScope of supply: Temperature logger, evaluation software, interface
Data transfer software AFH FAST for Digital force gauge
High speed data transfer software for force-time-measurements.Force measurements can be conducted over a very short period, i.e. seconds. A high speed data transfer to a PC is possible (with a transfer of up to 20 data sets per second) when combining the AFH FAST with force gauge. AFH FAST shows the results in a Force-Time-Graph and can export the data to MS Excel. Compatible with Microsoft Windows 7/8.1/10 operating systems. Incl. interface cable
Density bottles, Borosilicate glass 3.3., uncalibrated
All BLAUBRAND® density bottles are supplied with one accompanying individual certificate in the original packaging. On request, they are also available with a DAkkS calibration certificate.DIN ISO 3507,Gay-Lussac typeStopper NS 10/19 with capillaryTop of stopper ground and polishedNominal capacity printed on the bottom
Density determination kit
For the determination of the density of solids and liquids.
Density determination kit for high-capacity micro balances Cubis® II
Density determination kit for solids and liquids.
Density hydrometers without thermometer
Scale 0,300 up to 0,500 g/cm³, paper scale, shot weighted body, hydrometer accuracy ±1 scale division, capilary round, in transparent plastic case. Reading below.
Density hydrometers without thermometer
Scale 0,100 g/cm³, paper scale, shot weighted body, hydrometer accuracy ±1 scale division, in transparent plastic case. Reading below.
Density hydrometers without thermometer
Scale 0,100 g/cm³, paper scale, shot weighted body, hydrometer accuracy ±1 scale division, in transparent plastic case. Reading below.* Complete set with 14 insturments in stuffed case.
Density meter Densito
Robust density meter for mobile use with easy handling and user guidance. Ideal for rapid and accurate routine measurements in quality assurance, incoming and outcoming goods inspection.Automatic sampling pumpAvailable measurement scales: API, °Baumé, Brix, density, Ethanol, H2SO4, proof (US and IP), °Plato, specific gravity, user-defined concentrationAutomatic temperature compensationMemory for up to 1100 resultsBacklit measuring cellAdjustable limits with customisable colours in the displayBright display with good readabilityPower supply: Removable and rechargeable Li-Ion batteries
Density meter DensitoPro
Robust density meter for mobile use with easy handling and user guidance. Ideal for rapid and accurate routine measurements in quality assurance, incoming and outcoming goods inspection.DensitoPro equipped with RFID and barcode reader for rapid and reliable tracing of samples.Automatic sampling pumpAvailable measurement scales: API, °Baumé, Brix, density, Ethanol, H2SO4, proof (US and IP), °Plato, specific gravity, user-defined concentrationAutomatic temperature compensationMemory for up to 1100 resultsBacklit measuring cellAdjustable limits with customisable colours in the displayBright display with good readabilityPower supply: Removable and rechargeable Li-Ion batteries
Density meter DMA 501
Density meter for measuring of chemicals, pharmaceuticals, cosmetics and food. Suitable for samples with difficult properties like paste, inhomogeneous, sedimenting and particulate samples or aerosol sprays.The DMA 501 contains all relevant concentration tables and formulas for calculating product specific parameters and the results are displayed in the appropriate unit. Automatic filling and measuring with the optional available industrial peristaltic pump possible.Camera image of the measuring cell (U-view™) for viewing the correct sample filling, whereby potential filling errors due to inhomogeneous samples, gas bubbles or paticles are automatically detected with the FillingCheck™ functionSplash-proof frontFanless temperature control of the sampleUser-defined layouts of the measurement display with result outputs for individual requirementsDocumentation and traceability of dataElimination of external influences through the implementation of a standardised sample handlingIntegrated temperature and humidity sensorIntegrated pressure sensor for adjustmentAutomatic full-range viscosity correction of resultsMinimal sample volume: approx. 1 ml3 years warranty
Density meters DMA 35
Portable, digital measuring device for the determination of density, relative density and concentration. DMA 35 EX and DMA 35 EX Petrol are certified according to ATEX for applications in hazardous environments.On-site measurements for fast reactionsOscillator principle (borosilicate glass oscillator)Sample filling via manual filling pump or syringeComplete data control through traceabilityViscosity correction for measurements also on highly viscous samplesGesture control for one-handed measurementRecognition of results outside the tolerance limitMeasuring of density, relative density, alcohol concentration, sugar/extraction concentration, API functions, H2SO4 concentration, ten programmable custom-specific measuring unitsRobust case with exchangeable cell3 years warrantyScope of supply: Density meter, filling tube, adapter for syringe filling, syringes, transportation case, rubber protection for measuring cell, 3 x batteries, allen key, instructions.