pH meter Portavo 902 pH Set
Robust, intuitive analyser for daily routine measurements in the laboratory and process. The device is operated with 4 AA batteries.Ergonomically optimised for use on site and in the laboratoryHigh-contrast LCD displayMemosens sensors and analogue pH sensors can be usedDetachable sensor quiver protects against drying out and damageDisplay of sensor condition with SensofaceCalibration with automatic buffer recognition "Calimatic"Automatic detection of the temperature sensorWith real-time clockIncl. Memosens pH sensor SE 102-MS: pH eletrode with refillable liquid electrolyte, ceramic diaphragm, and integrated NTC temperature probeScope of supply: pH meter, 4 x AA batteries, Memosens pH sensor SE 102-MS, Memosens cable CA/MS-001XFA-L, carrying strap, case, buffer set CaliMat (1 x pH 4.00/7.00/9.00 each), specific test report, operating instructionsMeasuring range pH (analogue):-2 ... 16Measuring range mV (analogue):-1300 ... 1300 mVMeasuring range pH (Memosens):-2.000 ... 16.000Measuring range mV (Memosens):-2000 ... 2000 mVTemperature range (Memosens):-50 ... 250 °CDimensions (W x D x H):132 x 156 x 30 mmWeight:500 gIP code:IP 66
pH meter Portavo 904 pH
Portable and robust analyser for pH and ORP measurement. With the integrated data logger, up to 5000 measured values can be recorded, conveniently transferred to the PC via the USB interface and evaluated there.High-contrast LCD displayMemosens sensors and analogue pH sensors can be usedDetachable sensor quiver protects against drying out and damageDisplay of sensor condition with SensofaceCalibration with automatic buffer recognition "Calimatic"Automatic detection of the temperature sensorWith real-time clockCustomised pH calibration Cal SOP via PC softwareUser management for access controlThe device can be operated with either 4 AA batteries, 4 NiMH rechargeable batteries, or 1 Li-ion rechargeable battery (rechargeable via USB interface).Scope of supply: pH meter, 4 x AA batteries, carrying strap, USB cable, specific test report, operating instructionsMeasuring range pH (analogue):-2 ... 16Measuring range mV (analogue):-1300 ... 1300 mVMeasuring range pH (Memosens):-2.000 ... 16.000Measuring range mV (Memosens):-2000 ... 2000 mVTemperature range (Memosens):-50 ... 250 °CDimensions (W x D x H):132 x 156 x 30 mmWeight:500 gIP code:IP 66
pH meter Portavo 904 pH Set
Portable and robust analyser for pH and ORP measurement. With the integrated data logger, up to 5000 measured values can be recorded, conveniently transferred to the PC via the USB interface and evaluated there.High-contrast LCD displayMemosens sensors and analogue pH sensors can be usedDetachable sensor quiver protects against drying out and damageDisplay of sensor condition with SensofaceCalibration with automatic buffer recognition "Calimatic"Automatic detection of the temperature sensorWith real-time clockCustomised pH calibration Cal SOP via PC softwareUser management for access controlThe device can be operated with either 4 AA batteries, 4 NiMH rechargeable batteries, or 1 Li-ion rechargeable battery (rechargeable via USB interface).Incl. Memosens pH sensor SE 102-MS: pH eletrode with refillable liquid electrolyte, ceramic diaphragm, and integrated NTC temperature probeScope of supply: pH meter, 4 x AA batteries, Memosens pH sensor SE 102-MS, Memosens cable CA/MS-001XFA-L, carrying strap, case, USB cable, buffer set CaliMat (1 x pH 4.00/7.00/9.00 each), specific test report, operating instructionsMeasuring range pH (analogue):-2 ... 16Measuring range mV (analogue):-1300 ... 1300 mVMeasuring range pH (Memosens):-2.000 ... 16.000Measuring range mV (Memosens):-2000 ... 2000 mVTemperature range (Memosens):-50 ... 250 °CDimensions (W x D x H):132 x 156 x 30 mmWeight:500 gIP code:IP 66
pH meter Portavo 904 X pH
Portable and robust analyser for pH and ORP measurement. With the integrated data logger, up to 5000 measured values can be recorded, conveniently transferred to the PC via the USB interface and evaluated there.High-contrast LCD displayMemosens sensors and analogue pH sensors can be usedDetachable sensor quiver protects against drying out and damageDisplay of sensor condition with SensofaceCalibration with automatic buffer recognition "Calimatic"Automatic detection of the temperature sensorWith real-time clockCustomised pH calibration Cal SOP via PC softwareUser management for access controlpH value measurement with ATEX approval for measurements up to zone 0/1.The device is operated with 4 AA batteries.Scope of supply: pH meter, 4 x AA batteries, carrying strap, USB cable, specific test report, operating instructionsMeasuring range pH (analogue):-2 ... 16Measuring range mV (analogue):-1300 ... 1300 mVMeasuring range pH (Memosens):-2.000 ... 16.000Measuring range mV (Memosens):-2000 ... 2000 mVTemperature range (Memosens):-50 ... 250 °CDimensions (W x D x H):132 x 156 x 30 mmWeight:500 gIP code:IP 66
pH meter Portavo 904 X pH Set
Portable and robust analyser for pH and ORP measurement. With the integrated data logger, up to 5000 measured values can be recorded, conveniently transferred to the PC via the USB interface and evaluated there.High-contrast LCD displayMemosens sensors and analogue pH sensors can be usedDetachable sensor quiver protects against drying out and damageDisplay of sensor condition with SensofaceCalibration with automatic buffer recognition "Calimatic"Automatic detection of the temperature sensorWith real-time clockCustomised pH calibration Cal SOP via PC softwareUser management for access controlpH value measurement with ATEX approval for measurements up to zone 0/1.The device is operated with 4 AA batteries.Incl. Memosens pH sensor SE 554X/1-NMSN: pH eletrode with polymer electrolyte, open junctions, and integrated NTC temperature probeScope of supply: pH meter, 4 x AA batteries, Memosens pH sensor SE 554X/1-NMSN, Memosens cable CA/MS-001XFA-L, carrying strap, case, USB cable, buffer set CaliMat (1 x pH 4.00/7.00/9.00 each), specific test report, operating instructionsMeasuring range pH (analogue):-2 ... 16Measuring range mV (analogue):-1300 ... 1300 mVMeasuring range pH (Memosens):-2.000 ... 16.000Measuring range mV (Memosens):-2000 ... 2000 mVTemperature range (Memosens):-50 ... 250 °CDimensions (W x D x H):132 x 156 x 30 mmWeight:500 gIP code:IP 66
pH meter ProfiLine pH 3310
Convenient and versatile pH/mV meter with backlit graphics display and menu controlled operation for comfortable and safe operation. Waterproof and robust. With 5 point calibration for WTW technical or DIN/NIST buffers. The CMC function (Continuous Measurement Control) helps maintain the optimum measuring range and warns when limits are exceeded. The pH/mV handheld meter with integral, time controlled, data logger and memory for 5000 GLP compliant records is ideal for extended data collection. 100 % waterproof, USB interface for fast data transfer. Includes driver software and cable.Scope of supply: pH/mV meter, case, buffers STP 4 and STP 7, 3 mol/l KCl, operating instructions, CD-ROM, batteries, driver software for USB, cable
pH meter ProfiLine pH 3310 Set 2
Convenient and versatile pH/mV meter with backlit graphics display and menu controlled operation for comfortable and safe operation. Waterproof and robust. With 5 point calibration for WTW technical or DIN/NIST buffers. The CMC function (Continuous Measurement Control) helps maintain the optimum measuring range and warns when limits are exceeded. The pH/mV handheld meter with integral, time controlled, data logger and memory for 5000 GLP compliant records is ideal for extended data collection. 100 % waterproof, USB interface for fast data transfer. Includes driver software and cable.Scope of supply: pH/mV meter, case, pH electrode SenTix® 41, buffers STP 4 and STP 7, 3 mol/l KCl, stand, beaker, operating instructions, CD-ROM, batteries, driver software for USB, cable
pH meter SensoDirect pH 110
The SensoDirect pH 110 is a portable, battery operated pH meter. The instrument is equipped as standard with protective casing and built-in electrode holder. It is equipped with a LC display showing two decimal places. The gel electrode of the SensoDirect pH 110 is temperature resistant over the range -5 to 80 °C. It is fitted with a BNC connector as standard.Scope of supply: pH meter AL10pH, battery, pH-buffer (4.0 / 7.0), pH plastic electrode Type 226, in case.SpecificationsMeasuring range:0 to 14 pHResolution:0.01 pHAmb. temperature:0 to 50 °CRel. humidity:0 to 80 % (non condensing)IP code: Battery:IP 30 9 V-BlockDimensions (L x W x H):208 x 110 x 34 mmWeight:approx. 380 g
pH meter set ST 1000
Portable pH meter with external electrode.BNC connectionWith automatic pH calibrationHandy and robustCurrent value memorySimple calibration with keypadElectrodes for different applicationsMin/Max and hold functionScope of supply: pH meter PHT 810, penetration electrode AT 206, punching pin, buffer solutions pH 4 and pH 7, KCI solution, carrying case, 2-point calibration certificate
pH Meter testo 206-pH1
The testo 206 series is ideally suited for applications in liquid and semi-solid media, especially in the food sector. The instruments stand out due to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free, robust and insensitive to dirt. The protective cover TopSafe provides the instruments with the protection class IP 68.Built-in temperature sensorMaintenance-free gel electrolyteRobust, waterproof and dishwasher-safe protective coverAutomatic final value recognition (Auto-hold)Two-line LCD displaySpecially suited for fast pH checks in liquids.Scope of supply: testo 206-pH1: pH Meter, pH1 probe head, storage cap, protective cover TopSafe, belt and wall holderStarter-Set testo 206-pH1: pH Meter, pH1 probe head, storage cap, protective cover TopSafe, 2 x 250 ml calibration bottles (pH 4 and 7) belt and wall holder, aluminium caseSpecificationspH range: Resolution: Accuracy:0 ... 14 0.01 0.02 ±1 digitpH calibration points:1 ... 3 pointsOperating temperature:0 ... 60 °CDimensions (W x D x H):33 x 20 x 197 mm (with sensor and TopSafe)Power supply:Incl. 1 x CR2032IP code:IP 68 (with TopSafe)SpecificationsTemperature range:0 ... 60 °C (short-term to 80 °C max. 5 min)Resolution:0.1 °CAccuracy:± 0.4 °C ± 1 digitWeight:69 g
pH Meter testo 206-pH2
The testo 206 series is ideally suited for applications in liquid and semi-solid media, especially in the food sector. The instruments stand out due to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free, robust and insensitive to dirt. The protective cover TopSafe provides the instruments with the protection class IP 68.Built-in temperature sensorMaintenance-free gel electrolyteRobust, waterproof and dishwasher-safe protective coverAutomatic final value recognition (Auto-hold)Two-line LCD displayIdeally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruits etc.Scope of supply: testo 206-pH2: pH Meter, pH2 probe head, storage cap, protective cover TopSafe, belt and wall holderStarter-Set testo 206-pH2: pH Meter, pH2 probe head, storage cap, protective cover TopSafe, 2 x 250 ml calibration bottles (pH 4 and 7), belt and wall holder, aluminium caseSpecificationspH range: Resolution: Accuracy:0 ... 14 0.01 0.02 ±1 digitpH calibration points:1 ... 3 pointsOperating temperature:0 ... 60 °CDimensions (W x D x H):33 x 20 x 197 mm (with sensor and TopSafe)Power supply:Incl. 1 x CR2032IP code:IP 68 (with TopSafe)SpecificationsTemperature range:0 ... 60 °C (short-term to 80 °C, max. 5 min)Resolution:0.1 °CAccuracy:± 0.4 °C ± 1 digitWeight:62 g
pH Meter testo 206-pH3
The testo 206 series is ideally suited for applications in liquid and semi-solid media, especially in the food sector. The instruments stand out due to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free, robust and insensitive to dirt. The protective cover TopSafe provides the instruments with the protection class IP 68.Built-in temperature sensorMaintenance-free gel electrolyteRobust, waterproof and dishwasher-safe protective coverAutomatic final value recognition (Auto-hold)Two-line LCD displayUniversally applicable due to BNC socket, which enables the connection of different pH electrodes to the instrument.Scope of supply: pH Meter with BNC interface, protective cover TopSafe, belt/wall holderPlease order electrodes separately.SpecificationspH range: Resolution: Accuracy:0 ... 14 0.01 0.02 ±1 digitpH calibration points:1 ... 3 pointsOperating temperature:0 ... 60 °CDimensions (W x D x H):33 x 20 x 197 mm (with sensor and TopSafe)Power supply:Incl. 1 x CR2032IP code:IP 68 (with TopSafe)SpecificationsTemperature range:0 ... 80 °C (dependend on used pH electrode)Resolution:0.1 °CAccuracy:±0.4 °C ±1 digitWeight:69 g
pH meters Orion Star Series, A211, A214, A215
The benchtop meters Thermo Scientific™ Orion™ Star Series are the ideal choice for dedicated pH testing in water, process, research and QA/QC samples. Get the information you need quickly and easily from the large, backlit graphic LCD display. Informative display shows pH/mV/RmV and temperature along with electrode status, time, date, sample ID, user ID and calibration points. For advanced users, features such as stability and averaging choices provide additional options.Features and BenefitsAnyone can use this meter with its plain language screen prompts, soft keys that update for easy selection and a multilanguage interface that supports English, Spanish, French, Italian, German and ChineseDon't miss a reading: AUTO-READ™ locks in the stable reading on your screen, ready indicator alerts when readings are stable and timed reading gathers data in specific time intervalsUp to 5 point pH calibration with automatic recognition for USA/NIST and DIN buffersFix calibration errors without a complete recalibration with calibration editingNon-volatile memory holds up to 2000 data points with time and date stampStores up to 10 methods allow for customized procedures to differentiate between tests and/or usersEasily transfer data and keep meter software up-to-date with the USB and RS232 ports and complimentary data analysis softwareMix samples without a stir plate with direct control of the Orion Star stirrer probe (please oreder separately)Included electrode arm and newly-designed probe holder make it easier to maintain and place probes into samplesWorks with almost every AC power source with the included universal power adapter, or use four AA batteries (Batteries not included in delivery) to run the meter on DC powerIP54-rated housing handles splashes and is wall-mountable if table space is a problem3 year meter replacement warrantyTÜV, FCC certifiedA211 Supplied with:pH meter with electrode arm, 8302BNUMD Orion ROSS Triode 3-in-1 pH/ATC refillable glass electrode, 810199 ROSS pH buffer kit (475 ml each pH 4, 7 and 10 buffer solution, storage and cleaning solution, pH electrode storage bottle), universal power adapterA214 Supplied with:Orion-Star A214 pH/ISE Benchtop Meter Kit with Electrode Stand with ross ph buffer kitA215 Supplied with:Orion-Star A215 pH/conductivity benchtop meter + electrode holder, 8157BNUMD ROSS Epoxy refillable pH/ATC triode, 013005MD DuraProbe Epoxy 4-Cell, conductivity cell, 810199 ROSS pH buffer kit, 011007 conductivity standardSpecificationsMeasuring range pH:-2.000 ... 20.000Resolution: Relative accuracy: Calibration points: Calibration editing:0.1; 0.01; 0.001 ± 0.002 Up to 5 YesMeasuring range mV/Rel MV/ORP:± 2000.0 mVResolution: Relative accuracy:0.1 ± 0.2 mV or ± 0.05% of the measured value, larger value appliesEHORP Mode:YesMeasuring range Temperature:-5 °C ... 105 °CResolution: Relative accuracy: Offset calibration:0.1 ± 0.1 1 pointDatalogging:Number of Datalogs:2000 points with date and timeDatalog funcions:Manual, ready (incl. AUTO-READ™), timedInputs:pH Electrode: ATC Probe: Output:BNC, reference pin 8-pin mini-DIN S232; USBPower supply:AC adapter (included) 100 ... 240 VACBattery: Battery life:4 x AA batteries (optional) Approx. 800 hours
pH meters PH CHECK
With fix mounted electrodes, optimised for various applications. For measuring pH value and temperature.One-button calibration function1-3-point calibration availableHold functionClearly readable, split displayAutomatic temperature compensation (ATC)Hold function for current valueHigh degree of protection IP 65Battery life >100 hours in continuous modeBattery status indicatorAutomatic switch-offPH CHECK S: With insertion probe. E.g. suitable for measurements in meat, cheese, ham, semi-solid and solid media.PH CHECK F: With flat electrode. For testing on surfaces and with small sample quantities, e.g. food, leather, paper, skin, agar plates.PH CHECK G: With glass electrode. For general measuring tasks in liquids, especially suitable for aggressive media.Scope of supply: pH measuring instrument, 2 button cells CR2032, container with storage solutionSpecificationspH range:0 ... 14pH resolution:0.1pH accuracy:±0.1Calibration points:1 ... 3Temperature range:0 ... 60 °CTemperature resolution:0.5 °CTemperature accuracy:±1 °CPermissible ambient temperature:0 ... 50 °CDimensions (W x D x H):35 x 20 x 225 mmWeight:69 gPower supply:2 x CR2032IP code:IP 65
pH Pocket Tester Elite pH / Elite pH Spear
Simultaneously measure pH and temperature with a pocket sized tester designed to provide accurate measurements on the go for a variety of applications. The Pocket Tester Elite pH has a leakproof, transparent wide-base cap for upright standing with fill line indicator. The Elite pH Spear pocket tester features a spear tip open pore sensor. This rugged and user-friendly tester is ideal for direct measurement of solid or semi-solid samples.1-push calibrationLarge 4-digit double line displayBacklit graphic displayAuto-hold readingsEasy-to-operate, intuitive keypadAuto-offScope of supply:Elite pH and Elite pH Spear: Tester incl. batteries, lanyardElite pH Kit and Elite pH Spear Kit: Tester incl. batteries, laynard, soft carry case, buffer sachets set (pH 4.01, 7.00, 10.01, deionized water, 5 x 20 ml each)SpecificationsElite pH // pH SpearpH range: Resolution: Accuracy:-1.00 ... 15.00 0.01 pH ±0.01 pH ±1 LSDpH calibration points:1 ... 3 pointsTemperature range:0 ... 60 °CResolution:0.1 °CAccuracy:0 ... 50 °C (±0.5 °C + 1 LSD) 50 ... 60 °C (±1.0 °C + 1 LSD)Operating temperature: Relative humidity:5 ... 45 °C 5 ... 85 %, non-condensingTemperature compensation:ATC // MTCDimensions (W x L x H): Weight:200 x 45 x 36 mm // 280 x 45 x 36 mm 160 g // 150 gPower supply:4 x AAA 1.5 V batteriesIP code:IP 67
pH Tester LLG-pH Pen
Cost efficient pH tester, ideal for testing small amounts of liquid and in narrow vessels. The supplied storage container prevents the electrode from drying out.ATC from 0 to 50 °CLarge, easy-to-read LCD display3-point calibrationDimensions electrode (Ø x L): 12 x 110 mmScope of supply: pH meterPlease order batteries separately.
pH tester PHX 800
Housing made of ABSAutomatic switch-off after 15 minutesHold-functionAuto-lock-functionAutomatic deactivationBattery level indicatorExchangeable batteryRobustWaterproofAdjustable
pH tester Pocket Tester SD10 pH
Pocket Tester with waterproof housing for measuring pH, mV, and temperature. Ideal for regular checks in industrial plants or swimming pools. With lanyard and clip on the device head.Three-colour LED lighting system (blue, green, red) and display symbols for easy handling3 multifunction buttons with symbolsUp to 3 calibration pointsWith stability indicator, alarm for limits, auto-hold, and auto-off functionTransparent lid for measurement, calibration, and storage of the electrodeOptimised lid design for an upright and stable position of the testerBattery operation (4 x AAA batteries)Easy battery and electrode replacementpH measuring range:0.00 ... 14.00Resolution:0.01Accuracy:±0.01 (±1 digit)mV measuring range:-1000 ... 1000 mVResolution:1 mVAccuracy:±0.2 % FS
pH Tester testo 205
The testo 205 is a robust food penetration measuring instrument for temperature and pH values, with automatic temperature compensation. The robust penetration measurement tip is exchangeable and insenstitive to dirt thanks to the hole diaphragm.pH tip embedded in breakage-proof plasticCombined penetration tip with temperature probeMaintenance-free gel electrolyteAutomatic final value recognition (auto-hold)2-line, illuminated displayScope of supply: Set testo 205: Instrument, penetration probe, storage cap, belt and wall holderStarter-Set testo 205: Instrument, penetration probe, 2 x 250 ml calibration bottles (pH 4 and 7), belt and wall holder, aluminium caseSpecificationspH range: Resolution: Accuracy:0 ... 14 0.01 0.02 ±1 digitpH calibration points:1 ... 3 pointsTemperature range:0 ... 60 °C (short-term to 80 °C max. 5 min)Resolution:0.1 °CAccuracy:± 0.4 °COperating temperature:0 ... 50 °CDimensions (W x D x H):38 x 145 x 167 mmWeight:135 gPower supply:Incl. 4 x batteries LR44IP code:IP 65
pH-meter Seven2Go™ S2
Portable routine model for pH measurementsNew, intuitive menu structure with fast and easy T-Pad navigation in 12 languagesRobust design with IP67 protection for use in harsh and demanding environmentsIntelligent Sensor Management (ISM®) functionality reduces the risk of errorsUp to 5 point calibration with automatic buffer recognition and temperature compensation4 predefined buffer groups and 1 user defined buffer groupAutomatic, manual and time dependant endpoint recordingData memory storage for 200 data pointsPower requirements: 4 x 1.5V AA or 1.3V NiMH accumulatorsItems supplied:S2-Meter: Instrument, electrode clip, operating instructions, quick guide, test certificate, declaration of conformity and batteriesS2-Standard kit: As S2-Meter, but also with InLab Expert Pro-ISM-IP67, buffer sachets for pH 4.01, 7.00, 9.21, 10.00S2-Field kit: As S2-Standard kit, but also with bottles for calibration, uGo™ carrying caseS2-Food kit: As S2-Field kit, but with InLab Solids Pro-IP67 instead of InLab Expert Pro-ISM-IP67S2-Light kit: As S2-Standard kit, but with InLab Versatile Pro instead of InLab Expert Pro-ISM-IP67SpecificationspHMeasuring range: Resolution: Accuracy:-2 ... 20 pH 0.01 / 0.1 ±0.01mVMeasuring range: Resolution: Accuracy: Relative mV-measurement:-1999 ... 1999mV 1 ±1 yesTemperatureMeasuring range: Resolution: Accuracy:-5.0 ... 105.0 °C 0.1 °C ±0.5 °CDimensions (W x D x H):222 x 70 x 35 mm
pH/Ion-Meter Seven2Go™ pro S8
Portable professional model for pH measurement.New, intuitive menu structure with fast and easy T-Pad navigationRobust design with IP67 protection for use in harsh and demanding environmentsIntelligent Sensor Management (ISM®) functionality reduces the risk of errorsNew sunlight-proof screen guarantees screen readability even in direct sunlightNew StatusLight gives a fast, visual confirmation showing if the meter is ready to measure or notOperating support for 12 languages with information shown in complete words and sentencesUp to 5 point calibration with automatic buffer recognition and temperature compensation8 predefined buffer groups and 1 user defined buffer group (1 user defined ion-standard)Automatic, manual and time dependant endpoint recordingData memory storage for 2000 GLP data points with weatherproof Micro-USB connection for data exportPower requirements: 4 x 1.5 V AA or 1.3 V NiMH accumulatorsScope of supply: Instrument, LabX direct pH, USB cable, electrode clip, base accessory, operating instructions, quick guide, test certificate, declaration of conformity, batteries
pH/Ion-Meter Seven2Go™ pro S8 Biotech kit
Portable professional model for pH measurement.New, intuitive menu structure with fast and easy T-Pad navigationRobust design with IP67 protection for use in harsh and demanding environmentsIntelligent Sensor Management (ISM®) functionality reduces the risk of errorsNew sunlight-proof screen guarantees screen readability even in direct sunlightNew StatusLight gives a fast, visual confirmation showing if the meter is ready to measure or notOperating support for 12 languages with information shown in complete words and sentencesUp to 5 point calibration with automatic buffer recognition and temperature compensation8 predefined buffer groups and 1 user defined buffer group (1 user defined ion-standard)Automatic, manual and time dependant endpoint recordingData memory storage for 2000 GLP data points with weatherproof Micro-USB connection for data exportPower requirements: 4 x 1.5 V AA or 1.3 V NiMH accumulatorsScope of supply: Instrument, InLab Routine Pro ISM (incl. cable), buffer sachets for pH 4.01, 7.00, 9.21 and 10.00, bottles for calibration, uGo™ carrying case, LabX direct pH, USB cable, electrode clip, base accessory, operating instructions, quick guide, test certificate, declaration of conformity, batteries
pH/Ion-Meter Seven2Go™ pro S8 Field kit
Portable professional model for pH measurement.New, intuitive menu structure with fast and easy T-Pad navigationRobust design with IP67 protection for use in harsh and demanding environmentsIntelligent Sensor Management (ISM®) functionality reduces the risk of errorsNew sunlight-proof screen guarantees screen readability even in direct sunlightNew StatusLight gives a fast, visual confirmation showing if the meter is ready to measure or notOperating support for 12 languages with information shown in complete words and sentencesUp to 5 point calibration with automatic buffer recognition and temperature compensation8 predefined buffer groups and 1 user defined buffer group (1 user defined ion-standard)Automatic, manual and time dependant endpoint recordingData memory storage for 2000 GLP data points with weatherproof Micro-USB connection for data exportPower requirements: 4 x 1.5 V AA or 1.3 V NiMH accumulatorsScope of supply: Instrument, InLab Expert Pro-ISM-IP67, buffer sachets for pH 4.01, 7.00, 9.21 and 10.00, bottles for calibration, uGo™ carrying case, LabX direct pH, USB cable, electrode clip, base accessory, operating instructions, quick guide, test certificate, declaration of conformity, batteries
pH/Ion-Meter Seven2Go™ pro S8 Fluoride kit
Portable professional model for pH measurement.New, intuitive menu structure with fast and easy T-Pad navigationRobust design with IP67 protection for use in harsh and demanding environmentsIntelligent Sensor Management (ISM®) functionality reduces the risk of errorsNew sunlight-proof screen guarantees screen readability even in direct sunlightNew StatusLight gives a fast, visual confirmation showing if the meter is ready to measure or notOperating support for 12 languages with information shown in complete words and sentencesUp to 5 point calibration with automatic buffer recognition and temperature compensation8 predefined buffer groups and 1 user defined buffer group (1 user defined ion-standard)Automatic, manual and time dependant endpoint recordingData memory storage for 2000 GLP data points with weatherproof Micro-USB connection for data exportPower requirements: 4 x 1.5 V AA or 1.3 V NiMH accumulatorsScope of supply: Instrument, perfectION Fluoride, LabX direct pH, USB cable, electrode clip, base accessory, operating instructions, quick guide, test certificate, declaration of conformity, batteries