Rotary Vane Vacuum Pump RC 6
The Rotary Vane Vacuum Pump RC 6 has been designed to minimise the adverse effects of condensable and corrosive vapours. Its main components are a two-stage rotary-vane pump and a two-stage chemistry diaphragm for optimised corrosion resistance. The diaphragm pump continuously evacuates the oil reservoir of the rotary-vane pump in order to keep the partial pressures of solvent vapours, oxygen and corrosive gases at a low level and/or below their condensation point. The RC 6 is a low-maintenance pump for freeze-drying and other applications requiring an ultimate vacuum in the 10-3 mbar range.Scope of supply: Pump, overload circuit breaker and mains cable (2 m), centering and clamping ring for inlet, particulate filter, operating instructions, oil (bottle of 500 ml)Country-specific power cord versions available on request.
Sample transport box DURAPorter™, PC
Ideal for transporting biological and clinical samples, as well as instruments and products that you want to keep clean and dry under testing environmental conditions. Are light weight and easy to carry; they are ideal for moving samples that must be protected from humidity, dust and other environmental influence. The clarity of the DURAPorter™ enables the user to visibly check sample integrity, so that it can be opened using the right precautions.Polycarbonate construction are available in three colours for use/owner identificationSilicone water-tight seal and three lid clasps provide secure closureCarry handle folds neatly into body space allowing the units to be stackedLid opens a full 180°, allowing total access to contents and making it easier to cleanWill accommodate 13 and 16 mm tubes in a 72-place one rack®, or similar sized/brand of rackUse the separators provided to create your own compartment sizes, or use empty to transport larger products and equipmentAutoclavableMatching rack (e.g. Cat. No. 9.193 997, 9.193 998) please order separately. Further colours available on request.
Screw pumps VACUU·PURE® 10
Powerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.For ultra-clean processes and pure products100% oil-free due to cantilevered spindlesAbrasion-free due to contact-free operating principleNo wear partsQuick drying after high condensate loadSuitable for continuous operationWith air coolingRotatable inletWith Modbus RTU interfacePowerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.For ultra-clean processes and pure products100% oil-free due to cantilevered spindlesAbrasion-free due to contact-free operating principleNo wear partsQuick drying after high condensate loadSuitable for continuous operationWith air coolingRotatable inletWith Modbus RTU interface
Screw pumps VACUU·PURE® 10C
Powerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.For ultra-clean processes and pure products100% oil-free due to cantilevered spindlesAbrasion-free due to contact-free operating principleNo wear partsQuick drying after high condensate loadSuitable for continuous operationWith air coolingRotatable inletWith Modbus RTU interfaceThe chemical-resistant version VACUU·PURE® 10C is protected against corrosion due to chemically resistant polymers on all wetted parts. A thick-walled PEEK encapsulation protects the spindles and stator inside the pumping chamber, providing high chemical resistance. An integrated sealing gas supply prevents the bearings from chemical attack. Due to the design-related high condensate compatibility, no gas ballast is required, even with high vapor loads.
Scroll pump SCSpro 15
This oil-free scroll pump with self-cleaning air flush is the alternative solution to oil-sealed rotary vane pumps. The vacuum is generated by the continuous inclusion of gas pockets, which pass from the inlet to the outlet opening via a two-sided spiral mechanism.Self-cleaning function during operation without affecting the vacuumContinuous operation between ultimate vacuum pressure and atmosphereRobust dual voltage/frequency motorMade of high-quality materialsIntegrated hour meter for accurate servicingBuilt-in handle for easy transportModular design allows fast, easy maintenance
Scroll vacuum pump SCROLLVAC 3S plus
The oil-free, dry-compressing vacuum pump works on the principle of a scroll compressor and combines a high pumping speed with a good ultimate vacuum. Ideal for small laboratories as well as applications in research and development. The integrated exhaust valve provides effective protection against a rapid pressure rise in the event of a power failure. Additional system protection is provided by the solenoid inlet valve with delay relay, which isolates the pump from the system and preserve the vacuum inside the system.Powerful, dry-operating alternative to diaphragm pumpsCan be operated horizontally or verticallyCompact design with low weightMax. pump speed of 3 m3/hCarrying handle facilitates transport of the pumpBuild-in manual gas ballastLong maintenance intervals due to oil-free operation, low maintenanceLow vibration and quiet operation
Scroll vacuum pump SCROLLVAC C plus
The oil-free, dry-compressing vacuum pump works on the principle of a scroll compressor and is characterised by high pumping speed, with low ultimate pressure, low power consumption and low noise level. Ideal for general laboratory, light industrial, research, and chemical applications. The gas ballast enables the pumping of condensable vapours, including water, solvents, dilute acids, and bases. Absolute separation of the bearings from the pump mechanism prevents contamination. The integrated smart drive with auto sensing voltage input ensures optimised pump performance worldwide.Compact design with low weightControl panel for convenient control of the pump with remote control interfaceRunning time hours-counter included as standardUniversal voltage drive (100 to 127 V/200 to 240 V, 50/60 Hz)High water vapour capacityLow noise level for a quiet working and laboratory environmentLow-maintenance, simple seal replacement (maintenance kits can be ordered separately)ATEX-certified (Ex II 3 G c IIB T4)Specially developed for aggressive applications. By using purge gas, the SCROLLVAC C plus can be configured to process corrosive solvents and chemicals without any problems.Chemical resistant exhaust check valve and gas ballast valveStainless steel inlet and exhaust flanges
Scroll vacuum pump SCROLLVAC plus
The oil-free, dry-compressing vacuum pump works on the principle of a scroll compressor and is characterised by high pumping speed, with low ultimate pressure, low power consumption and low noise level. Ideal for general laboratory, light industrial, research, and chemical applications. The gas ballast enables the pumping of condensable vapours, including water, solvents, dilute acids, and bases. Absolute separation of the bearings from the pump mechanism prevents contamination. The integrated smart drive with auto sensing voltage input ensures optimised pump performance worldwide.Compact design with low weightControl panel for convenient control of the pump with remote control interfaceRunning time hours-counter included as standardUniversal voltage drive (100 to 127 V/200 to 240 V, 50/60 Hz)High water vapour capacityLow noise level for a quiet working and laboratory environmentLow-maintenance, simple seal replacement (maintenance kits can be ordered separately)ATEX-certified (Ex II 3 G c IIB T4)The oil-free, dry-compressing vacuum pump works on the principle of a scroll compressor and is characterised by high pumping speed, with low ultimate pressure, low power consumption and low noise level. Ideal for general laboratory, light industrial, research, and chemical applications. The gas ballast enables the pumping of condensable vapours, including water, solvents, dilute acids, and bases. Absolute separation of the bearings from the pump mechanism prevents contamination. The integrated smart drive with auto sensing voltage input ensures optimised pump performance worldwide.Compact design with low weightControl panel for convenient control of the pump with remote control interfaceRunning time hours-counter included as standardUniversal voltage drive (100 to 127 V/200 to 240 V, 50/60 Hz)High water vapour capacityLow noise level for a quiet working and laboratory environmentLow-maintenance, simple seal replacement (maintenance kits can be ordered separately)ATEX-certified (Ex II 3 G c IIB T4)
Shelves for Desiccators Mini
V 1860-75: made of PMMA, transparentV 1860-77: made of conductive PE, black
Shelves for Desiccators Star
V 1860-68: Suitable for Desiccators Star (except Star-Horizontal and Star-Big), PMMA, perforated, inclusive two guide rails made of polyamide.V 1860-02: Suitable for Desiccators Star-Big and Maxi, stainless steel, perforated, inclusive two guide rails made of aluminium.V 1860-03: As V 1860-02 but inclusive two guide rails made of polyamide.
Shut off modules for local vacuum network VACUU LAN®
The VACUU LAN® local vacuum network allows multiple work stations to be connected to a single vacuum pump. This is useful for almost any conventional vacuum application in a chemical laboratory VACUU LAN® can be directly incorporated into new laboratory installations or retro-fitted. All assemblies have integral check (1-way) valves. A practical and economical solution for multiple vacuum users in a single laboratory.Detailed brochures are available on request!The VACUU LAN® local vacuum network allows multiple work stations to be connected to a single vacuum pump. This is useful for almost any conventional vacuum application in a chemical laboratory VACUU LAN® can be directly incorporated into new laboratory installations or retro-fitted. All assemblies have integral check (1-way) valves. A practical and economical solution for multiple vacuum users in a single laboratory.Detailed brochures are available on request!
Shut-off/control modules for local vacuum network VACUU LAN®
The VACUU LAN® local vacuum network allows multiple work stations to be connected to a single vacuum pump. This is useful for almost any conventional vacuum application in a chemical laboratory VACUU LAN® can be directly incorporated into new laboratory installations or retro-fitted. All assemblies have integral check (1-way) valves. A practical and economical solution for multiple vacuum users in a single laboratory.Detailed brochures are available on request!The VACUU LAN® local vacuum network allows multiple work stations to be connected to a single vacuum pump. This is useful for almost any conventional vacuum application in a chemical laboratory VACUU LAN® can be directly incorporated into new laboratory installations or retro-fitted. All assemblies have integral check (1-way) valves. A practical and economical solution for multiple vacuum users in a single laboratory.Detailed brochures are available on request!
Small flange fittings, with female ground joint
Small flanges. Stainless steel.
Spare cold trap for cold traps with Dewar flask, stainless steel 1.4301, two-piece
Two-piece cold trap made of stainless steel with KF NW small vacuum flange.
Spare cold traps for cold traps with Dewar flask, borosilicate glass 3.3, one-piece
One-piece spare cold traps made of borosilicate glass 3.3.Versions of the cold trap connections:S 29 = spherical ground joint S 29O 29 = spherical ground joint S 29 with O-ring sealGL 18 = glass thread GL 18 with PTFE olive Ø 10 mmKF NW 16 or 25 = small vacuum flange KF NW 16 or 25