Half-moon stirrer for Overhead Stirrers
These impellers are recommended for applications which require an average speedFor mixing products with average viscosityModel HR 18 come with tilting agitator blades
High Performance condensers Findenser™
For simple and safe reflux reactions without water cooling. Consists of a glass column and a finned aluminium jacket with excellent heat transfer.Encapsulated thermal fluid is located between the glass column and the jacket to transfer the heat from glass to jacket.Ready for immediate useSuitable for unattended continuous operationIndependent from water connectionsLarge cooling surfaceChemical resistant anodised surfaceCan be used with standard laboratory clamps or the Findenser™ attachment kit
Holding Frame for a Test Plate for shaking trays
Stainless steel, for securing a test plate on shaking trays. Supplied with attachment material.
Horizontal attachments for vortexers Vortex-Genie®
The attachments enable vigorous mixing of samples. Vessels are fixed horizontally.
Hot plate shaker SM 30 AT control
This programmable orbital shaker with heating plate is ideal for mixing difficult media. The wide choice of rack systems ensures optimal fastening of different vessels.Temperature adjustable up to 120 °CWith touch displayProgrammable running time or continuous operationScope of supply: Basic device with heating plate, without attachementPlease order attachments separately.
Hotplate stirrer Thermo Scientific™ RT2 Advanced
Slim and low profile Thermo Scientific™ RT2 Advanced digital hotplate stirrer.Precise digital control with 0,1 ºC resolutionMicroprocessor PID temperature controlUser configurable temperature limit settingAutomatic over-temperature safety shut off at 450 ºCHeating rate can be set from 0 to 100 % at 1 % intervalView current and set temperature simultaneouslyTimer can be set to start immediately or when desired temperature is reachedIf stirring viscosity changes, the feedback function allows unit to maintain set speedTemperature probe (included) when coupled, automatically changes to external sensor mode
Hotplate stirrers Guardian™ 5000, with round top plate
These magnetic stirrers are designed for safety and versatility across research, academic and industrial settings. They offer powerful mixing with premium hardware and software to support users safely and reliably.SmartRate™ enables to select fast or slow temperature and speed ramp ratesSmartHeat™ safely controls and monitors the maximum temperatureSafetyHeat™ assures safety in heating applications with dual monitoring of system healthWith connection for temperature sensor (Pt 100, Pt 1000)Run dry protection with alarmTimer from 1 min to 99 h 59 minWith RS232 interface
Hotplate stirrers Guardian™ 5000, with round top plate, Set
These magnetic stirrers are designed for safety and versatility across research, academic and industrial settings. They offer powerful mixing with premium hardware and software to support users safely and reliably.SmartRate™ enables to select fast or slow temperature and speed ramp ratesSmartHeat™ safely controls and monitors the maximum temperatureSafetyHeat™ assures safety in heating applications with dual monitoring of system healthWith connection for temperature sensor (Pt 100, Pt 1000)Run dry protection with alarmTimer from 1 min to 99 h 59 minWith RS232 interfaceScope of supply: Hotplate stirrer, temperature sensor Pt 1000, sensor holder kit
Hotplate stirrers Guardian™ 5000, with square top plate
These magnetic stirrers are designed for safety and versatility across research, academic and industrial settings. They offer powerful mixing with premium hardware and software to support users safely and reliably.SmartRate™ enables to select fast or slow temperature and speed ramp ratesSmartHeat™ safely controls and monitors the maximum temperatureSafetyHeat™ assures safety in heating applications with dual monitoring of system healthWith connection for temperature sensor (Pt 100, Pt 1000)Run dry protection with alarmTimer from 1 min to 99 h 59 minWith RS232 interface
Hotplate stirrers Guardian™ 5000, with square top plate, Sets
These magnetic stirrers are designed for safety and versatility across research, academic and industrial settings. They offer powerful mixing with premium hardware and software to support users safely and reliably.SmartRate™ enables to select fast or slow temperature and speed ramp ratesSmartHeat™ safely controls and monitors the maximum temperatureSafetyHeat™ assures safety in heating applications with dual monitoring of system healthWith connection for temperature sensor (Pt 100, Pt 1000)Run dry protection with alarmTimer from 1 min to 99 h 59 minWith RS232 interfaceScope of supply: Hotplate stirrer, temperature sensor Pt 1000, sensor holder kit
Impellers VISCO JET®
The worldwide patented VISCO JET® Mixing System is the result of the so-called cone-principle. Turbulent flows are created at the taper end by acceleration, displacement and retardation. These flows advance through the stirred medium and result in the new dynamic mixing motion.One system for literally all mixing tasks for low to high viscosity mediaPatented cone-principle creates even at low speeds a turbulent flow which is unique to the VISCO JET®Even with high-viscosity media and gels which naturally do not mix by using common impellers you will observe an immediate flow through the entire beakerThis technology allows for de-gassing of gels while preventing air intake and foamingReduce process times significantly while performing the best mixing result everThe stirring systems are made of stainless steel or polyoxymethylene (POM).
Incubating Cooling Thermal Shakers
These Thermal Shakers are designed for heating and cooling applications that require consistent and precise high-speed shaking with dependable temperature control from 17 °C below ambient to 100 °C.Fast and accurate temperature controlCooling models reach temperatures down to 17 °C below ambientTouchscreen for simple operation and programming6 different languages adjustableEasily create programs for repeat applicationsStorage for five separate, 5-step programsUSB port for data logging to a USB stickHuge number of different blocksWithout blocks. Please order separately.Motion:Orbital, 3 mmSpeed Range:300 ... 3000 rpmSpeed Accuracy:± 2%Temperature Accuracy ISTHBLHTS:± 1 °C between 20 °C and 45 °C; ± 2 °C above 45 °CTemperature Accuracy ISTHBLCTS:± 0.5 °C between 20 °C and 45 °C; ± 2 °C below 20 °C and above 45 °CHeating Rate:5 °C/minCooling Rate:Above ambient 2 - 3 °C/min, below ambient 0.5 - 1.0 °C/minTimer:1 second - 99 hours, 59 minutesCapacity:1 Thermal blockWorking Environment:5 °C – 35 °C, 80% relative humidity, non-condensingDisplay:10.9 cm color touchscreen LCDDrive System:Brushless DC MotorPower:230V, 0.9A, 50/60HzPower Consumption:210 W
Incubator hood TH 15
Small incubation chamber, Can be used in combination with the KS and TiMix 5 shakers as a complete shaking incubator or as a stand-alone unit. For cell and tissue culture or micro-organism cultivation, production of secondary natural products and biogenic pharmaceuticals, or genetic modification of useful plants.Comprises:Coated metal casing with window in the front door which opens upwards and with safety cut-out switch facility for internal accessory instruments on opening the door.High temperature option (to 60 °C) available on request.Temperature range:5 ... 50 °CTemperature probe:PT100Control accuracy:±1% of set valueAir circulation:240 m³/hr.Dimensions (W x D x H):510 x 450 x 455 mm (external) 490 x 410 x 310 mm (internal)Weight:21 kgSupply requirements:230 V, 50/60 Hz
Incubator hood TH 30
Incubation chamber with standard and UV fluorescent illumination. Can be used in combination with SM shakers as a complete shaking incubator or as a stand-alone unit. For cell and tissue culture or micro-organism cultivation, production of secondary natural products and biogenic pharmaceuticals or genetic modification of useful plants.Comprises:Incubation chamber complete with light fittings, safety cut-out switch facility for internal accessory instruments and UV light on opening door.Accessories available:High temperature option (to 60 °C) as well as Fitted cooling coil and connections for refrigeration of TH 30 (cooling capacity according to external cooling unit used) - details on request.Temperature range:Ambient +5 ... 50 °CTemperature sensor:PT100Control accuracy:±1% of set valueAir circulation:240 m³/hr.Lighting:Standard 15 W fluorescent illumination 15W UV illuminationDimensions (W x D x H):680 x 610 x 560 mm (external) 660 x 540 x 430 mm (internal)Weight:33 kgSupply requirements:230 V, 50/60 Hz
Keyless chuck for overhead stirrers
R 60: Only for use with EUROSTAR 20 / 40 / 60 / 100 / 200 / RW 20, excluding EUROSTAR 20 high speed digital and control.R 60.1: For MINISTAR 20 / 40 / 80 digital and control, MICROSTAR series and NANOSTAR 7.5 digital.
Laboratory software Labworldsoft® 6 Pro
Laboratory software to control lab devices, automate processes, and to document your measurements and results.Over 700 laboratory devices from over 40 manufacturers and customized implementation availableAny number of devices can be controlled at the same timeCentral storage of all configurations and measurement results in the own networkCompatible with Windows 7,8 and 10Available formats: .csv, .xslx, ASCII (Labworldsoft 5 Data Format)
Large sample set H302 for vortexers Vortex-Genie®
Sample set for shaking and mixing beakers, flasks, and test tubes with different diameters.Scope of supply: Recessed platform, elastic bands, foam insert for 12 x Ø 9 to 16 mm test tubes, foam insert for 8 x Ø 14 to 29 mm test tubes, foam insert for 4 x Ø 29 to 37 mm test tubes, blank foam insert