Shaker VORTEX 2
Vortex shaker especially for short time operation (Touch function) or continuous operation.
Shaker Vortex 3
Vortex shaker suitable for intermittent operation (touch function), activated by pressing shaker attachment, or for continuous operation.Wide speed range, infinitely adjustableVersatile, due to 3 accessory interchangeable attachments and 7 inserts (e.g. Eppendorf tubes, microtitre plates, 250ml Erlenmeyer flasks etc.), please order separatelyAttachments securely click onto shaker in any positionStrap clamp (VG3.36) ensures easy holding of round/Erlenmeyer flasksSturdy, die cast zinc casingStable at high speeds due to special feet (silicone base with ultra-high vibration damping)Eccentric drive with ball bearingsSelf-ventilated motor allows continuous operation with minimal warm-up of the housingSupplied with standard attachment.
Shaker Vortex-Genie® Max
Robust and reliable shaking device for mixing and shaking of samples in Erlenmeyer flasks, vials, tubes, beakers, or microplates.Digital display for speed and timeRobust metal caseSecure stand at high speed thanks to supports with high vibration dampingCan be loaded with e. g. max. 6 Erlenmeyer flasks 250 ml or 2 multi racks each for 10 test tubes (max. tube diameter 29 mm)Unique ratcheting clamping system, ideal for repetitive protocols and use with open containersFully programmableRevers and interval mixingPulse function (0.1 s to 99 min)Timer from 1 min to 99 hScope of supply: Shaker, platform with 2 ratcheting clamps
Shaking attachement for Magnetic stirrers MIXSTER
For operating the MIXSTER as a vortex or orbital shaker.
Shaking Incubators VorTemp™ 56 / 1550
VorTemp™ 56 is supplied with interchangeable platforms for microtubes (56 x 1.5ml tubes, or small tubes with adapters) or microplates (accepts standard and deepwell plates, up to 2.0ml). VorTemp™ 1550 includes platforms for 8 x 50ml and 18 x 15ml tubes.The shaker in the VorTemp™ 56 may be turned off, allowing the unit to be used as a static incubator.shake and incubate samples simultaneouslyinterchangeable platformsbroad temperature and speed rangeintelligent control with digital LED displaySpecificationsVorTemp™ 56 // VorTemp™ 1550Temperature range:5…100 °CTemperature accuracy:±1 °CSpeed range:200 ... 1300 min-1// 200 ... 900 min-1Motion/orbit:3 mm, circularTimer:1 ... 999 minutes or continuousCapacity:56 x 1.5/2.0ml tubes, 4 standard or 2 deep well microplates // 18 x 15ml, 8 x 50ml tubesDimensions (W x D x H):230 x 310 x 230 mm // 260 x 310 x 310 mmWeight:11 kg // 12 kgPower supply:230 V/50 Hz or 120 V/60 Hz
Single and Multi-position magnetic stirrers LABOMAG
Immerseable in waterbath up to 60°CSlim, sturdy and wear-free magnetic stirrersPowerful inductive driveHomogenous mixing of larger liquid volumes''Soft-Start-Function'' for smooth and even stirringController memorizes the last setting of speed and directionIntegrated USBIncl. separate control unitStainless steel housing, polishedCompletely encapsulated induction drive
SmartExtender™ for Eppendorf ThermoMixer™ C and ThermoStat C
A heatable frame/attachment for mixer, with separate temperature control (3 °C above RT to 110 °C), for simultaneous operation at two different temperatures.
Special platforms, stainless steel 304
For Analogue/Digital 16 kg Shakers and Reciprocating Shakers.Pre-mounted flask clamps for maximum utilization of platform space for flasks of all one size. Flask clamps are constructed of PVC. Ideal for polycarbonate flasks.
Spiral stirrer, stainless steel 1.4571
Generates axial flow. Medium is conveyed from the bottom upwards. For homogeneous mixing and heat exchange of medium to high viscosity media. Recommended for medium speed operations.
Stackable tray
High, non-slip metal tray that can be stacked on the existing tray of the Roto-Shake Genie®.
Stacking tray for microplate shaker MultiPlate Genie®
With the stacking tray as an attachment, 4 additional microtitre plates can be mixed with the MultiPlate Genie®.When using the stacking tray, please do not place deep-well plates on the bottom platform.
Stacking Trays for Rocking Shakers SHRK series and Tumbling Shakers SHWV series
![Stand with Laboratory balance IKA [scale] for overhead stirrers](https://shop2.ebiscon.io/media/45/31/e0/1758076577/4672719_1.jpg?ts=1758076577 "Stand with Laboratory balance IKA [scale] for overhead stirrers")
Stand with Laboratory balance IKA [scale] for overhead stirrers
The stand with integrated scale and data interface is ideally suited for for the direct and controlled addition of sample material while stirring. The quantities of samples to be added are weighed immediately and continuously documented during the stirring process.Clear LCD displayStable die cast zinc housingOverload protectionUSB interfaceBluetooth connectionAccuracy: ±6 g
Standard platform
Standard platform with bands for attaching different vessels.
Stands
Floor stand BS 1 with angled foot, plastic-coated, stand rod Ø 34 x 1000 mmFloor stand BS 2 with angled foot, plastic-coated, stand rod Ø 34 x 1500 mmFloor stand BS 3 with angled foot 600 mm, completely made of stainless steel, stand rod Ø 34 x 1000 mmWall bracket WSRod diam. 34 x 1000 mm, clearance from wall: 200 mm.
Stirrer Shafts with One Paddle, PTFE
PTFE-jacketed stainless steel shaft, paddle completely made of PTFE with two 45° angled blades. Universal chemical resistance since the product is only exposed to PTFE. Temperature resistance: from -200 to +250 °C. The product is sucked bottom-up, very good axial flow with low shear force.
Stirring bars Spinbar®, octagon
Multi-faceted shape provides greater surface area and added turbulence for more vigorous, thorough mixing when compared to the smooth surface of cylindrical bars.With pivot ring for better mixing conditionsAlnico magnet encapsulated with Teflon® brand PTFE coatingFDA Grade, USP Class VIGood chemical compatibilityAutoclavableManufactured in a registered ISO 9001:2015 facility