Drum for one bottle STR4/3 for overhead shakers DR-200
The drum has a platform which can be adjusted within the drum from horizontal to 45°. In this way, the sample container can be rolled and turned end over end at the same time (figure-8 motion). Suitable for extractions, paint mixing, powders and granular samples. The sample container is held by an adjustable velcro strap.With BioCote, silver-based, antimicrobial protection.Please order drive DR-200 separately.
Drum for two bottles STR4/2 for overhead shakers DR-200
Drum with two platforms. Accepts two 250 ml conical flasks or reagent bottles.With BioCote, silver-based, antimicrobial protection.Please order drive DR-200 separately.
Elastic bands for recessed platform for vortexers Vortex-Genie®
Elastic bands for attaching various sample vessels to the recessed platform. Suitable for microtitre plates, as well as vessels up to 500 ml.
Eppendorf ThermoMixer C
The Eppendorf ThermoMixer C combines unique mixing performance with excellent temperature control to consistently guarantee complete, dependable and reproducible test results. Improve your assay results by mixing and incubating samples at the same time.Excellent mixing performance due to unique 2DMix-Control technologyPrevent condensation and improve temperature homogeneity with the new ThermoTopErgonomic designEppendorf QuickRelease™ Technology for fast and simple block exchange of Eppendorf SmartBlocks™Highest flexibility thanks to broad choice of exchangeable SmartBlocks™Heating, mixing and cooling of all common tubes and microplates with a volume range of 5µl to 50mlNow you can control the temperature of your samples with ease: The ThermoTop, with unique condensation protection technology, reliably prevents condensation formation on the tube lid and wall. It also improves temperature homogeneity. The Eppendorf ThermoTop does not have a cable connection. It is detected by the device as soon as it is positioned, via inductive signal transmission, and thermo-regulation starts automatically. The sample temperature is not affected: optimal sample protection with optimal reaction conditions produce optimal results.
Eppendorf ThermoMixer™ F0.5/F1.5/F2.0/FP
To simplify lab routines. Whether work with regularly 0.5, 1.5 or 2.0 ml reaction vessels or plates (MTP and DWP) - the customized systems from Eppendorf offer the perfect solution for special applications. The devices combine precise heating and mixing with the highest stability, even at maximum mixing frequency. Mixing and incubation steps can be performed independently.For 24 reaction vessels or one microplate/deepwell plateEfficient mixing thanks to 2DMix-Control and anti-spill technologySimple and intuitive operation using predefined temperature keys (37 °C, 42 °C, 56 °C and 95 °C)Improved temperature homogeneity with the new ThermoTop
Erlenmeyer Flask Clamps, PVC
Constructed of one piece, molded PVC. Autoclavable. Will not scratch or mark flask like other clamps. Incl. screws for easy attachment to universal platforms. Ideal for polycarbonate flasks.
Exchangeable blocks Eppendorf SmartBlocks™
Flexibility has never been this easy. Eppendorf offers a variety of SmartBlocks™ for tubes from 0.5 ml to 50 ml.Fast and simple block exchange due to Eppendorf Quick ReleaseOptimized block design guarantees maximum temperature transfer to the sample
Extension platform for Mini-100 Orbital-Genie®/Genie Temp-Shaker 100
Non-slip tray that extends the capacity of shakers. 2 platforms can be stacked.
Fixing clip platform AS 130.2
For shaking round bottom vessels, volumetric and Erlenmeyer flasks.Supplied without clips.
Fixing clip platform AS 260.2
For shaking round bottom vessels, volumetric and Erlenmeyer flasks.Max. number of clips (capacity held): 56 x AS 2.1 (25 ml), 23 x AS 2.2 (50 ml), 23 x AS 2.3 (100 ml), 11 x AS 2.4 (250 ml), 9 x AS 2.5 (500 ml), 5 x AS 2.6 (1000 ml)Supplied without clips.
Fixing clip platform AS 501.4
For shaking round bottom, flat-bottom, pear-shaped, volumetric and erlenmeyer flasks etc. Minimum volume 25 ml.Capacity: Number of fixing clips (volume held) 110 x AS 2.1 (25 ml), 55 x AS 2.2 (50 ml), 35 x AS 2.3 (100 ml), 16 x AS 2.4 (250 ml), 12 x AS 2.5 (500 ml), 8 x AS 2.6 (1000 ml)Without spring clips.
Flask Clamps, stainless steel
Clamps for Erlenmeyer flasks, Media bottles* and Fernbach flasks**. Incl. screws for easy attachment to platforms. Clamps for flasks with 50 ml and higher are supplied with a spring to hold the flask in place.
Flask shaker WA-200
Creates a vigorous reciprocal shaking action. With clamps to accept 8 flasks up to 500 ml capacity. With stepless variable speed control from 80 to 800 oscillations/min. and 10 to 60 minute timer with off and continuous run settings. Electronic feedback control ensures a constant speed irrespective of the load.With BioCote, silver-based, antimicrobial protection.Scope of supply: Flask shaker incl. 2 arms, 8 clamps and allen keyPlease order extension kit for shaking of 12 bottles or flasks separately.
Foam inserts for Mini Vortex Mixers
The Insert Retainer is required for use of the Foam inserts. Please order separately.
Foam inserts for recessed platform for vortexers Vortex-Genie®
For use with the recessed platform. Ideal for shaking and mixing several test tubes with different diameters.Please order recessed platform separately.
Foam inserts for shaker platform for vortexers Vortex-Genie®
For use with the shaker platform. Ideal for shaking and mixing samples in reaction vessels or microtitre plates.Please order shaker platform separately.
Foam inserts for universal holder
Universal holder is required for use of the foam inserts. Please order separately.
Foam inserts set for recessed platform for vortexers Vortex-Genie®
For use with the recessed platform. Ideal for shaking and mixing several test tubes with different diameters.Please order recessed platform separately.Scope of supply: Foam insert for 12 x Ø 9 to 16 mm test tubes, foam insert for 8 x Ø 14 to 29 mm test tubes, foam insert for 4 x Ø 29 to 37 mm test tubes, blank foam insert
