Magnetic stirrer ST-200-S
Without heatingCompact, space saving designTop plate made of stainless steelElectronic variable speed control with off positionWith BioCote® coating. Based on the antibacterial effect of silver, the growth of microorganisms and bacteria is prevented.
Magnetic stirrer steriMIXdrive for external control
Due to the external control, these magnetic stirrers are suitable for use in ovens, incubators, safety cabinets or for underwater operation, depending on the device. Wide speed ranges make them ideal for viscous media. Low space requirement due to the flat and compact design with maximum stirring surface.Maintenance-free 2mag motor driveFully sealed housingExtremely robust construction and designEasy to clean and maximum resistance3 years warrantyMade in GermanyPlease always order control units separately.Pressure, steam, vacuum and temperature-resistant magnetic stirrer for operation in steam sterilisers.Encapsulated, pressure and vacuum tight housing, temperature resistant up to 150 °CeasyMOUNT plug coupling for quick installation of the stirrer cable through a pressure and steam tight grommetHigh power transmission over longer distances or for thick vessel bottomsmixWATCH stirring rod monitoring in connection with steriMIXcontrol
Magnetic stirrer, KMO3 basic
Small but very powerful magnetic stirrer, with illuminated set-up plate.Glass surfaceWhite LED displayWithout heatingLocking buttonRight-left-runIntegrated USB interfaceSunken thread for stand rod
Magnetic stirrers C-MAG MS 4 / C-MAG MS 7 / C-MAG MS 10
Without heating. With glass ceramic top plate which offers excellent chemical resistance.powerful motor for stirring quantities of up to 5l, 10l, or 15l (H2O)raised control panel for protection against leaking liquids
Magnetic stirrers for cell cultures for external control, bioMIXdrive 1/2/3/4
Due to the external control, these magnetic stirrers are suitable for use in ovens, incubators, safety cabinets or for underwater operation, depending on the device. Wide speed ranges make them ideal for viscous media. Low space requirement due to the flat and compact design with maximum stirring surface.Maintenance-free 2mag motor driveFully sealed housingExtremely robust construction and designEasy to clean and maximum resistance3 years warrantyMade in GermanyPlease always order control units separately.Submersible magnetic stirrers for careful, protective and warming-free mixing of cell cultures and culture broths.Suitable for propeller and spinning ball culture flasksFor long-term use, e.g., in CO2 incubatorsIndividual measurements on request
Magnetic stirrers, Maxi MR 1 digital
Without heating.High powerFlat stable stainless steel housingNon-locking motorAdjustable speedLED digital speed display0 to 56 minute timer, or continuous operationWithout heating.High powerFlat stable stainless steel housingNon-locking motorAdjustable speedLED digital speed display0 to 56 minute timer, or continuous operation
Magnetic stirrers, Midi MR 1 digital
Without heating.High powerFlat stable stainless steel housingNon-locking motorAdjustable speedLED digital speed display0 to 56 minute timer, or continuous operationWithout heating.High powerFlat stable stainless steel housingNon-locking motorAdjustable speedLED digital speed display0 to 56 minute timer, or continuous operation
Multi-position Magnetic stirrer AMI 4, illuminated
Multi-position magnetic stirrer with illuminated stirring positions for stirring volumes up to 5 l per position. With epoxy-coated metal housing for protection against liquid spills.4 stirring positionsGentle start-upIlluminated stirring positionsElectronic speed control up to 1100 min-1Low height
Multi-position magnetic stirrer MULTISTIRRER Digital
With epoxy painted, robust steel housing and stainless steel set-up plate for protection against leaking liquids. Bright LED display for accurate speed monitoring and timer for unattended operation. Ideal for titration, microbiology and biochemistry.The device remains cold even in continuous operationSynchronous speed of all stirring positionsAdjustable, time-controlled auto-reverse functionTorque compensation to keep the speed constant in case of viscosity changesGentle start-upElectronic speed controlSpeed adjustable in 10 rpm stepsAlso suitable for use with water bathsLight weight
Multi-position magnetic stirrer ST-200-MP
With stainless steel top plate accommodating up to 3 x 2 litre beakers, separate speed controls, with fittings for retort rods at the rear of the case.Scope of supply: Magnetic stirrer, 3 x PTFE coated stir bars (25 mm)
Multi-position magnetic stirrer SuperNuova™
Multi-position magnetic stirrer without heating. With 4 independently controllable stirring positions.Ceramic top plateMemory function for 4 commonly used protocolsLock featureStirring speed adjustable in 1 rpm incrementsRS232 interface
Multi-position magnetic stirrers Cimarec™ i Telesystem, Speed 130 ... 1400 rpm
With non-mechanical, electronic induction drive and dust / watertight housing. Ideal for batch series stirring and for use in water baths. For stirring volumes up to 2 l per position. Can be remotely operated and is supplied with controller. Available as standard, high-power 20 watt or ultra high-power 40 watt versions.With non-mechanical, electronic induction drive and dust / watertight housing. Ideal for batch series stirring and for use in water baths. For stirring volumes up to 2 l per position. Can be remotely operated and is supplied with controller. Available as standard, high-power 20 watt or ultra high-power 40 watt versions.
Multi-position magnetic stirrers MULTISTIRRER
With epoxy painted, robust steel housing and stainless steel set-up plate for protection against leaking liquids. Ideal for titration, microbiology and biochemistry.The device remains cold even in continuous useTorque compensation to keep the speed constant in case of viscosity changesGentle start-up to avoid spillingPale set-up plate Electronic speed controlAlso suitable for use with water bathsLight weight
Multi-position magnetic stirrers RO 5/10/15 series
Without heating. 5, 10 or 15-position digital magnetic stirrers, designed for synchronous stirring. The magnetic coil technology provides noiseless and consistent stirring on all positions. Speed remains constant, even when load changes. The closed and compact design allows easy cleaning and protects the equipment against the penetration of liquids. Additionally, a removable transparent anti-slip mat is included.Adjustable reverse operationEco-mode for a low self-warming of the surfaceWear free magnetic coilsError Code DisplayEasy operation with touch keypadSuitable for continuous operationAdjustable speed in increments of 10rpm
Multi-position magnetic stirrers, Cimarec™ i Telesystem, Speed 100 ... 2000 rpm
With non-mechanical, electronic induction drive and dust / watertight housing. Ideal for batch series stirring and for use in water baths. For stirring volumes up to 2 l per position. Can be remotely operated and is supplied with controller. Available as standard, high-power 20 watt or ultra high-power 40 watt versions.With non-mechanical, electronic induction drive and dust / watertight housing. Ideal for batch series stirring and for use in water baths. For stirring volumes up to 2 l per position. Can be remotely operated and is supplied with controller. Available as standard, high-power 20 watt or ultra high-power 40 watt versions.
Multi-position stirring attachment for Magnetic stirrers MIXSTER
For increasing the number of stirring positions of a MIXSTER from 1 to 9. Especially suitable for sample mixing in vessels with volumes of 8 to 60 ml.
Platform extenstion, stainless steel, for magnetic stirrer I-MAG
Stainless steel set-up frame to extend the footprint and load capacity of the I-MAG magnetic stirrer.
Shaking attachement for Magnetic stirrers MIXSTER
For operating the MIXSTER as a vortex or orbital shaker.
Universal adhesive mat for Magnetic stirrers MIXSTER
In combination with universal attachment MS 3.3 ideal for shaking e.g. Erlenmeyer flasks or cell culture flasks up to 500 ml.Please order universal attachment MS 3.3 separately.
Universal holder for I-MAG controller
For secure mounting of the cable-connected I-MAG operating unit directly on the edge of the vessel or to be mounted on the I-MAG SP 150 and I-MAG SP 300 set-up frames using a stand rod.
Vessel holders for Magnetic stirrers MIXSTER
Incl. anti-slip mat MIX.IX.ANTISLIP.