Spatula, stainless steel
Sample spatula made of stainless steel V4A (1.4404). The highly stable and solid design of the spatula allow it to pierce solid substances or sacks and BigBags. The spatula is made of premium stainless steel, high-gloss polished and completely welded, therefore completely free of undercuts. It is ideally suited for taking samples of powders, granulates and pasty media, especially in food and pharmaceutical applications. Autoclavable, flame sterilisation.
Special dispersing heads for disperser T50 digital
R 50 "high speed" stirring shaftUsing the R 50 stirring shaft, the T50 digital is quickly converted into a high speed stirrer. 700W power and 10000rpm are provided for rapid mixing, dissolving, and breaking up pigment agglomerates. The conical shaft is supported by means of ball bearings, the mixing elements have a screw connection. For operational safety a protective cage is fitted around the mixing element.S 50 N - W 80 SMK Jet mixer headFor shortening mixing and dissolving times. The vertical flow and the high tangential speed, up to 10000rpm, ensure intensive mixing. The head is used for adding gases or liquids, for lump-free suspension of difficult to dissolve powders or for dissolving sedimented, accreted substances.S 50 N - W 65 SK Cutting headTo crush large pieces (up to 50mm) of fibrous materials, such as plant matter, vegetables and fruit.
Special sample bags Whirl-Pak® with scoop
Whirl-Pak® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications.Temperature range -210 to 82 °C.With sterile scoop.
Special sample bags Whirl-Pak®, black
Whirl-Pak® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications.Temperature range -210 to 82 °C.Made of black pigmented PE-film providing maximum protection for samples that are sensitive to light.
Stand for ultrasonic homogenisers, stainless steel
Stand made of stainless steel, incl. stand rod (Ø 16 x 500 mm).
Stand Homogenisers POLYTRON® PT 10-35 GT (Ecoline)
Cost effective dispersing unit for applications with operating volumes up to 10 liters. The powerful motor is useful for sample preparation and also for formulation in scale-up matters. More than 30 dispersion aggregates with different geometries, designs, sizes, materials and coatings are available for selection. The electronic control system continuously compares the pre-selected rpm speed with the actual speed and adjusts it so that the speed remains constant even as the viscosity increases.Aggregate tip speeding up to 34 m/sSoft start to prevent splashing of homogenate from sample vesselIntegrated overheating, overload and blocking protectionSpeed remaining constant even when viscosity changesAggregate replacement using one-handed quick-release coupling (type F)Insulated motor housing keeps motor noise to a safe, approved level during operationVarious models of EasyClean dispersing aggregatesApplications: General homogenisation applications (dispersion and emulsification), Formulation of lotions, creams and food, Production of oil-water emulsions, Dispersion of small quantities from plants, animals or human tissueStand and Dispersing heads must be ordered separately.
Stand Homogenisers POLYTRON® PT 3100 D / PT 6100 D (High-End-Line)
The PT 3100 D / PT 6100 D dispersion unit is unique in its class. Applications with highest demands on reproducibility or requiring a scale-up step are excellently served by this unit. The complete digitalised control and regulating system can be easily operated using the membrane keyboard. The bright and informative display shows all parameters. Via PC interface, diverse parameters such as speed profile or times can be specified using the enclosed KIN software. Results can be recorded as an Excel file. Up to 30 dispersion aggregates with different geometries, design sizes, materials and coatings are available for selection.Soft start (e.g. for pre-selected speed, prevents splashing sample vessel)Integrated overheating, overload and blocking protectionSpeed stability in the case of viscosity changesSimple operating concept using membrane keyboardSelection of three operating modes: standard, timer, autoPC interface (RS232) for control via KIN softwareAggregate replacement using one-handed quick-release coupling (type F)Sound-insulated housingDigital LCD display with membrane keypad for showing process parameters and messagesComprehensive aggregate portfolio with easy cleaning in Easy Clean designAggregate tip speeds up to 32 m/sStand and Dispersing heads must be ordered separately.
Stand Homogenisers POLYTRON® PT 45-80 GT (Ecoline)
High performance dispersing unit with powerful drive, stepless speed control, high tip speed and a variety of interchangeable dispersion aggregates for a wide range of dispersing and mixing applications.Aggregate tip speeding up to 32 m/sEasy operation with an on-off switch, speed control and membrane keypadIntelligent variable speed control for long equipment lifeIntegrated overheating, overload and blocking protectionSpeed remaining constant even when viscosity changesAggregate replacement using one-handed quick-release coupling (type F)Easy cleaning of the unit thanks to EasyClean designApplications: General homogenisation applications (dispersion and emulsification), Formulation of lotions, creams and food, Production of oil-water emulsions, Dispersion of small quantities from plants, animals or human tissueDispersing heads must be ordered separately.
Stand-Up bags, TWIRL’EM, with writing area
For collecting, transporting and analysing liquid and solid samples.The combination of the flat bottom and the wire closure offers a bag that stands by itself and remains open until the sample has been poured in.Integrated secure closure system with 2 round wiresSterileContaminant-freeWaterproof and airtightRNase, DNase and pyrogen free
Stands for Homogenisers POLYTRON®
HS 1200 E: Holder for the support of drive, transformer, four dispersing aggregates and two tools.ST-P 13/320: Stainless steel plate stand with anti-slip mat made of silicone, with height-adjustable holder for the drive and for fastening the base station.ST-P 01/200: Stainless steel joint stand (gas spring) with two rivet plugs for safe fixing of the basic station The drive holder can be rotated in any direction, raised and lowered.ST-P 15/320: Stainless steel plate stand with height-adjustable holder for drive support and for safe fixing of the basic station.ST-P 20/600: Plate stand with two rod design. Height adjustable.ST-P 10/600: Plate stand with one rod design. Allows easy and safe height adjustment of the drive unit. Material: AluminumST-F 10/600: H-foot stand made of anodized aluminum and the height adjustable, swiveling PTFE-coated work table with vessel holder. Material: AluminumST-P 14/590+500: Electric plate stand with lifting telescopic bar for more ease of use. Incl. up/down button and mat to prevent slipping. Stroke 500 mm. The electronics are designed for ambient temperatures of +5°C to +40°C and were tested per EN 60335-1 and UL 962.ST-P 21/700: Stainless steel plate stand with two rod design. Height adjustable. For more safety, the drive unit cannot be twisted sidewise or rotated.*with optional adapter
StickProof Sampler, stainless steel
For pharmaceutical powders. Electropolished, stainless steel V4A. Supplied with fixing clip and 100 x PE sample bags 120 x 170 mm.The particularly fine point can be inserted easily and deeply. Sample volumes can be varied (up to approx. 50 cm³) via the tapered sampling orifice. StickProof is manufactured from one piece, without edges, grooves or crevices for perfect and easy cleaning. The sample can be filled directly into sampling bags.Lock seal close-it und close-it food & pharma please order separately.
Strap clamps RH 3 for overhead stirrers and Dispersers T 18 and T 25
For vessel Ø 40 to 300 mm.
Strap clamps RH 5 for overhead stirrers an Disperser T 50 digital ULTRA-TURRAX®
With R 270 bosshead. For vessel Ø 40 to 300 mm.
Suction sampler, Mini ViscoSampler
For viscous media such as pastes, sludge, creams, oils, e.g. for pharmaceutical and cosmetic industry. Depending on the viscosity, the removable suction tip can be fitted with suction drills of 2 mm to 6 mm (supplied with 2 mm drill tip).Electropolished V4A stainless steelPiston made of PTFESterilizable
Swab-Sampler Enviro
Ready-to-use swab reaches into corners and hard-to-reach areas for increased accuracyTamper-evident band indicates if the swab has been used
Swab-Sampler with Buffered Peptone Water Brot
Swab reaches into corners and hard-to-reach areasBottles have ample headspace for sample addition and vortexingSelf-contained swab and vial for increased productivity and efficiency
Swab-Sampler with Letheen Broth
Swab reaches into corners and hard-to-reach areasBottles have ample headspace for sample addition and vortexingSelf-contained swab and vial for increased productivity and efficiency
Swab-Sampler with Neutralizing Buffer
Swab reaches into corners and hard-to-reach areasBottles have ample headspace for sample addition and vortexingSelf-contained swab and vial for increased productivity and efficiency
Syringe SteriPlast® , PP
Sterilised, individually packaged, transparent. A Luer adapter is supplied for the 100 ml syringe.
Target immersion cylinder
With the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. With 5 m venting tube. Screw off top enables easy cleaning.
TeleScoop Telescopic Rods, aluminium
Different tools can be attached to the telescopic rod (snap-in joint). The individual rods have been provided with an end stop. This means that one rod cannot accidentally slip out of another rod. The telescopic rods cannot be rotated radially.Increased rigidity by using cold-rolled profile rodSprings made of stainless steel