Accessories for sieves, stainless steel
In accordance to ISO 3310-1:2016 and ASTM E11:2009.Further collecting pans available on request.
Adapter for polyamide test sieves
This adapter is to be used in combination with the clamping lid plexiglas, for test sieves 200 mm / 8" Ø (Cat. No. 9.826 404) for secure fixing of polyamide test sieves on Fritsch Sieve Shakers ANALYSETTE 3 PRO and SPARTAN.
Analytical Sieve Test Sand
Test materials can be used to check analytical sieves between the schedulded calibration dates and to demonstrate the presence of the required properties, as well as the suitability of analytical sieves. A test material for analytical sieves with frequent mesh widths ( 2.0mm - 1.0mm - 0.5mm - 0.25mm - 0.125mm ).Pack of 3 bottles, 202g eachGrain size : from 0.125mm to 2.00mmData sheet for the use of traceability for analytical sievesEach bottle contains a mixture of different sizes.
Mesh, Polyamide
Thermo-fixed Polyamide (Nylon) mesh is temperature stable from -40 °C to 115 °C. In water from 95 °C to 100 °C. Stability in acids is limited and dependent on concentration and temperature. Nylon exhibits outstanding stability in alkalis, including sodium and potassium solutions. Its chemical behaviour with respect to organic solvents is moderate to good. Minimum mesh width: 102 cm, Length: 1 mOther sizes available on request.
Mesh, polyester
Thermo-fixed PE mesh with temperature resistance from -75 °C to 150 °C (short). For long term heating max. 125 °C. Resistant to acids but not alkalis.Dimensions: Minimum width 102 cm, Length 100 cm.Other sizes available on request.
NEXOPART Test sieves, 200 x 32 mm
Sturdy stainless steel sieve frameSmooth frame surfacePrecise mesh sizesAccurate edgesWith serial number and data matrix codeIncl. Certificate of Compliance 2.1 acc. to DIN EN 10204Manufactured acc. to DIN ISO 3310-1Sturdy stainless steel sieve frameSmooth frame surfacePrecise mesh sizesAccurate edgesWith serial number and data matrix codeIncl. Certificate of Compliance 2.1 acc. to DIN EN 10204Manufactured acc. to DIN ISO 3310-1
NEXOPART Test sieves, 200 x 32 mm
Sturdy stainless steel sieve frameSmooth frame surfacePrecise mesh sizesAccurate edgesWith serial number and data matrix codeIncl. Certificate of Compliance 2.1 acc. to DIN EN 10204Manufactured acc. to DIN ISO 3310-1Sturdy stainless steel sieve frameSmooth frame surfacePrecise mesh sizesAccurate edgesWith serial number and data matrix codeIncl. Certificate of Compliance 2.1 acc. to DIN EN 10204Manufactured acc. to DIN ISO 3310-1
NEXOPART Test sieves, 200 x 50 mm
Sturdy stainless steel sieve frameSmooth frame surfacePrecise mesh sizesAccurate edgesWith serial number and data matrix codeIncl. Certificate of Compliance 2.1 acc. to DIN EN 10204Manufactured acc. to DIN ISO 3310-1Sturdy stainless steel sieve frameSmooth frame surfacePrecise mesh sizesAccurate edgesWith serial number and data matrix codeIncl. Certificate of Compliance 2.1 acc. to DIN EN 10204Manufactured acc. to DIN ISO 3310-1
NEXOPART Test sieves, 200 x 50 mm
Sturdy stainless steel sieve frameSmooth frame surfacePrecise mesh sizesAccurate edgesWith serial number and data matrix codeIncl. Certificate of Compliance 2.1 acc. to DIN EN 10204Manufactured acc. to DIN ISO 3310-1Sturdy stainless steel sieve frameSmooth frame surfacePrecise mesh sizesAccurate edgesWith serial number and data matrix codeIncl. Certificate of Compliance 2.1 acc. to DIN EN 10204Manufactured acc. to DIN ISO 3310-1
Sieving aids
For difficult to separate materials which require dry sieving. Different aids are used according to mesh size.
Test sieves
With welded seam (heat resistant up to 170 °C). Diameter: 200 mm.Height: 50 mm.
Test sieves
With soft solder seam (temperature resistant to 170°C). 200mm diameter. Height 50mm.
Test sieves
With soft solder seam (temperature resistant to 170°C). 200mm diameter. Height 50mm.
Test sieves
With soft solder seam (temperature resistant up to 170 °C).Diameter: 200 mm.
Test sieves
With soft solder seam (temperature resistant to 170°C).200mm diameter.Height 25mm.
Test sieves
With welded seam (heat resistant up to 170 °C). Diameter: 100 mm.Height 45 mm.
Test sieves
With soft solder seam (temperature resistant to 170°C). 100mm diameter. Height 45mm.
Test sieves
With soft solder seam (temperature resistant to 170øC).100mm diameter.Height 45mm.
Test sieves
With welded PVC seam (temperature resistant up to 70 °C). Diameter: 200 mm. Height: 50 mm.
Test sieves
With welded PVC seam (temperature resistant to 70 °C).200 mm diameter. Height 50 mm.
Test sieves 200 LS-N
Robust screen construction with plain stainless steel frame. With 2.1 certificate of conformity, acc. to EN 10204.
Test sieves A200 LS
Robust screen construction with plain stainless steel frame. With 2.1 certificate of conformity, acc. to EN 10204.
Test sieves e200 LS
Robust screen construction with plain stainless steel frame.