Spatula, stainless steel
Sample spatula made of stainless steel V4A (1.4404). The highly stable and solid design of the spatula allow it to pierce solid substances or sacks and BigBags. The spatula is made of premium stainless steel, high-gloss polished and completely welded, therefore completely free of undercuts. It is ideally suited for taking samples of powders, granulates and pasty media, especially in food and pharmaceutical applications. Autoclavable, flame sterilisation.
Special sample bags Whirl-Pak® with scoop
Whirl-Pak® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications.Temperature range -210 to 82 °C.With sterile scoop.
Special sample bags Whirl-Pak®, black
Whirl-Pak® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications.Temperature range -210 to 82 °C.Made of black pigmented PE-film providing maximum protection for samples that are sensitive to light.
Stand-Up bags, TWIRL’EM, with writing area
For collecting, transporting and analysing liquid and solid samples.The combination of the flat bottom and the wire closure offers a bag that stands by itself and remains open until the sample has been poured in.Integrated secure closure system with 2 round wiresSterileContaminant-freeWaterproof and airtightRNase, DNase and pyrogen free
StickProof Sampler, stainless steel
For pharmaceutical powders. Electropolished, stainless steel V4A. Supplied with fixing clip and 100 x PE sample bags 120 x 170 mm.The particularly fine point can be inserted easily and deeply. Sample volumes can be varied (up to approx. 50 cm³) via the tapered sampling orifice. StickProof is manufactured from one piece, without edges, grooves or crevices for perfect and easy cleaning. The sample can be filled directly into sampling bags.Lock seal close-it und close-it food & pharma please order separately.
Suction sampler, Mini ViscoSampler
For viscous media such as pastes, sludge, creams, oils, e.g. for pharmaceutical and cosmetic industry. Depending on the viscosity, the removable suction tip can be fitted with suction drills of 2 mm to 6 mm (supplied with 2 mm drill tip).Electropolished V4A stainless steelPiston made of PTFESterilizable
Swab-Sampler Enviro
Ready-to-use swab reaches into corners and hard-to-reach areas for increased accuracyTamper-evident band indicates if the swab has been used
Swab-Sampler with Buffered Peptone Water Brot
Swab reaches into corners and hard-to-reach areasBottles have ample headspace for sample addition and vortexingSelf-contained swab and vial for increased productivity and efficiency
Swab-Sampler with Letheen Broth
Swab reaches into corners and hard-to-reach areasBottles have ample headspace for sample addition and vortexingSelf-contained swab and vial for increased productivity and efficiency
Swab-Sampler with Neutralizing Buffer
Swab reaches into corners and hard-to-reach areasBottles have ample headspace for sample addition and vortexingSelf-contained swab and vial for increased productivity and efficiency
Syringe SteriPlast® , PP
Sterilised, individually packaged, transparent. A Luer adapter is supplied for the 100 ml syringe.
Target immersion cylinder
With the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. With 5 m venting tube. Screw off top enables easy cleaning.
TeleScoop Telescopic Rods, aluminium
Different tools can be attached to the telescopic rod (snap-in joint). The individual rods have been provided with an end stop. This means that one rod cannot accidentally slip out of another rod. The telescopic rods cannot be rotated radially.Increased rigidity by using cold-rolled profile rodSprings made of stainless steel
Thermometer insert for Well Scoop Thermometers
Well Scoop Thermometer and Tank Thermometer for sampling and temperature measurement at the same time.Please order thermometer insert and armour separately.Calibratable. Immersion depth - total.
Transport tubes, PS with cap
Outer case available in transparent or opaque materialMade of polystyrene with polyethylene capsAvailable sterile or nonsterileSome available with writing areaMax. RCF tested: 4000
Uno-sampler
For sampling bulk goods of all types. Easy emptying with the emptying device. Lock seal close-it and close-it food & pharma please order separately.With a closed chamber, for target samples from a pre-determined sample depth.
Vampire Sampler
The self-priming peristaltic pump is also suitable for dirty or particle-containing substances with a viscosity of max. 500 mPas. Ideal for sampling from barrels, tanks, wells, water separators, waste water and sewage treatment plants. The samples are fed directly into the sample container via the closed hose system.Battery-powered hose pumpEasy cleaning and exchangeable hoses prevent impuritiesSuction depth up to 5 metresScope of supply: Drive unit, pump head, pump hose (30 cm, Marprene), suction hose (5 m, PE), hose connector (PP), sample bottle (250 ml, LDPE), bottle basket, two rechargeble batteries, battery charger
Water sample bottles, PET, with sodium thiosulfate, bulk packed
Gamma sterilised bottles for taking, transporting and storing of water samples for microbiological analysis. Wide bottle neck (GL 50) provides easy filling and pouring. Cap is made from PE with self sealing lock with integral security ring. Information such as lot number, production and expiry dates etc. are indicated on the packaging.Bottles with sodium thiosulfate (20 mg/l - according to ISO/FIS 19458/2006 standard) are ideal for water analysis where chlorine may modify the composition of the sample.SterileLeak-proofThick wallsCrush-resistant corners
Water sample bottles, PET, with sodium thiosulfate, single packed
Gamma sterilised bottles for taking, transporting and storing of water samples for microbiological analysis. Wide bottle neck (GL 50) provides easy filling and pouring. Cap is made from PE with self sealing lock with integral security ring. Information such as lot number, production and expiry dates etc. are indicated on the packaging.Bottles with sodium thiosulfate (20 mg/l - according to ISO/FIS 19458/2006 standard) are ideal for water analysis where chlorine may modify the composition of the sample.SterileLeak-proofThick wallsCrush-resistant corners
Water sample bottles, PET, without sodium thiosulfate, bulk packed
Gamma sterilised bottles for taking, transporting and storing of water samples for microbiological analysis. Wide bottle neck (GL 50) provides easy filling and pouring. Cap is made from PE with self sealing lock with integral security ring. Information such as lot number, production and expiry dates etc. are indicated on the packaging.SterileLeak-proofThick wallsCrush-resistant corners
Water sample bottles, PET, without sodium thiosulfate, single packed
Gamma sterilised bottles for taking, transporting and storing of water samples for microbiological analysis. Wide bottle neck (GL 50) provides easy filling and pouring. Cap is made from PE with self sealing lock with integral security ring. Information such as lot number, production and expiry dates etc. are indicated on the packaging.SterileLeak-proofThick wallsCrush-resistant corners