Sample bags, TWIRL’EM, with writing area
For collecting, transporting and analysing liquid and solid samples.Integrated secure closure system with 2 round wiresSterileContaminant-freeWaterproof and airtightRNase, DNase and pyrogen free
Sample bags, TWIRL’EM, with writing area, heavy sample closure
For collecting, transporting and analysing liquid and solid samples.Integrated secure closure system with 1 round wire and 1 flat wireSterileContaminant-freeWaterproof and airtightRNase, DNase and pyrogen free
Sample bags/Homogenising bags Whirl-Pak®, PE, sterile
Sterile, solid bags for the homogenisation of liquids and solidsWith and without labelling strips
Sample bottles, PP
Sturdy bottles with wide-necked opening. For viscous media, powder, granules and pastes.
Sampler AquaSampler, PTFE/FEP
Sample collector for groundwater samples from wells, shafts and other sources.Suitable for all common well shafts with inspection openings from Ø 2’, without jamming or snagging.Ultra-pure material guarantees maximum sample purityEasy cleaning thanks to rounded edges and threads
Sampler EasySampler, stainless steel V4A
For taking free-flowing or self-flowing samples from bulk goods. Emptying takes place via the tip. The sample can be emptied directly into the sample container without having to disassemble the EasySampler, in order to obtain a mixed sample for instance. For sample opening from 52 mm Ø.Food-safeAutoclavable
Sampler ice borer, stainless steel
The sampler is suitable for deep-frozen products in the food industry and semi-solid substances. With the robust hollow borer, with sharp sawing crown, a cross-sectional sample of up to 20 cm length can be cut out.Stainless steel V4A (1.4404/1.4571)SterilisableFood-safeScope of supply: Borer, borer head for use in conventional drills and rod for pressing the cylindrical sample out of the borer head
Sampler Liquid CupSampler, stainless steel V4A
For point sampling of liquids of varying viscosity. Media containing particles can also be sampled. Container diameter: 55 mm.Easy cleaning thanks to unscrewable cupFood-safeAutoclavable
Sampler LiquiSampler, PP
DIN EN ISO 15528. For liquids. For contamination-free sampling. Practical push button, single-handed operation. Suitable for point, cross-sectional, and bottom sampling. Ideal for sampling from open and closed drums, kegs, tanks, silos, water sources (ponds, lakes, streams, rivers). Suitable for all commercial kegs and drums with openings of at least 32 mm diameter. All surfaces are non-porous and crevice-free preventing accumulation of dirt. Only round-profile screwthreads, suitable for food hygiene applications, are used. Simple to dismantle and clean.
Sampler LiquiSampler, PTFE/FEP
DIN EN ISO 15528. For liquids. Made of ultra pure and chemically inert PTFE/FEP for contamination-free sampling. Practical push button, single-handed operation. Suitable for point, cross-sectional, and bottom sampling. Ideal for sampling from open and closed drums, kegs, tanks, silos, water sources (ponds, lakes, streams, rivers). Suitable for all commercial kegs and drums with openings of at least 32 mm diameter. All surfaces are non-porous and crevice-free preventing accumulation of dirt. Only round-profile screwthreads, suitable for food hygiene applications, are used. Simple to dismantle and clean.
Sampler Mini, stainless steel V4A
For precise sampling of small quantities (0.01 - 0.1 ml). With an insertion depth of up to 300 mm, multiple target point samples can be collected at different depths. When the button is pressed, a sampling rod enters the sample material and retracts when released. In this way, a fixed amount of sample material is enclosed in the sample notch of the rod and removed.
Sampler Mini-Sampler, PTFE
For ultrapure sampling. Also suitable for viscous oils.Complete with one PFA Sample Jar 180 ml, 5 m PTFE suction tubing (6 x 8 mm), one tubing cutter, one tubing weight (V2A/nickel-plated brass) and 20 seal-it safety seal labels in case.
Sampler Mole
The soil sampler made from iron consists of 3 parts: a handle with rod, optional extensions and the hardened drill bits. For determining soil properties, moistureand structure. Extension rods can extend the working depth of the Mole down to 5 m. Individually customisable.Drill bits for different soil properties:Clay and damp soil: With narrow side panels for minimum soil friction/resistance. The soil adheres to the bit very wellSand: With broad side panels and therefore a large retention capacity for the sandCoarse sand: With extra broad side panels for sampling sandy soils and very dry soilsCombination: Retains both strongly cohesive and less cohesive soilsRiverside: Very suitable for drilling in hard, encrusted soils and soils mixed with fine gravel. The drill cutters project from the drill itself, so that friction is greatly reducedGravel drill: With slightly rounded, oblique scoops. Any stones present are clamped between the drill sides.Stone catcher: The stone catcher is used to collect and remove stones that prevent proper sampling
Sampler PowderProof®, horizontal, for granulates
Different lances and augers can be attached to the robust drive unit and swapped without any problems.For mobile sampling of granulates from 2 up to 4 mm. PowderProof® with lance for horizontal use for sampling from bags.Battery operationStainless steel AISI 316L (1.4404)/AISI 301 (1.4310)Food safeAutoclavableScope of supply:Motor, two rechargeable batteries, fast charger, lance, auger, bags, clip for holding the bag, cleaning brush
Sampler PowderProof®, horizontal, for powders
Different lances and augers can be attached to the robust drive unit and swapped without any problems.For mobile sampling of powders up to 2 mm. PowderProof® with lance for horizontal use for sampling from bags.Battery operationStainless steel AISI 316L (1.4404)/AISI 301 (1.4310)Food safeAutoclavableScope of supply:Motor, two rechargeable batteries, fast charger, lance, auger, bags, clip for holding the bag, cleaning brush
Sampler PowderProof®, vertical, for granulates
Different lances and augers can be attached to the robust drive unit and swapped without any problems.For mobile sampling of granulates from 2 up to 4 mm. PowderProof® with lance for vertical use for sampling from open containers such as drums, barrels or BigBags.Battery operationStainless steel AISI 316L (1.4404)/AISI 301 (1.4310)Food safeAutoclavableScope of supply:Motor, two rechargeable batteries, fast charger, lance, auger, bags, clip for holding the bag, cleaning brush
Sampler PowderProof®, vertical, for powders
Different lances and augers can be attached to the robust drive unit and swapped without any problems.For mobile sampling of powders up to 2 mm. PowderProof® with lance for vertical use for sampling from open containers such as drums, barrels or BigBags.Battery operationStainless steel AISI 316L (1.4404)/AISI 301 (1.4310)Food safeAutoclavableScope of supply:Motor, two rechargeable batteries, fast charger, lance, auger, bags, clip for holding the bag, cleaning brush
Sampler ProfiSampler, aluminium
Vacuum-operated sample collector for sampling solvents and flammable liquids (Explosion Categories IIA, IIB and IIC) out of drums, tanks, road tankers, railway wagons, ships, lakes, ground water.Filling level control, automatic return flow and overfill protection by built-in venting valveSuction volume: 200 ml, suction pressure 0.5 bar and suction depth down to 4m of waterWith bottle thread GL 45 (suitable for Schott glass bottles 100 to 1000ml)Can be supplied with optimized, straight suction tube for simpler samplingTransport case for tidy transport and disposalAlways check the chemical resistance of parts coming into contact with the sampleWhen taking samples of flammable liquids, the device must be earthedWear protective clothing!Scope of supply: aluminium vacuum pump, with feet (aluminium), venting valve and GL45 bottle thread, 1 x 500 ml glass bottle, 5 x 220 mm long, conductive, black PA suction tubes, 1 tubing cutter, 1 brass hose weight, 20 seal-it bottle seals, earthing cable
Sampler QualiRod, stainless steel
Conical hand-drill, conically shaped, with sharp cutting edges and a solid handle. Ideal for cutting out samples for quality control from soft, paste-like substances (cheese, butter, clay, soap, wax, etc.).Stainless steel (1.4028)SterilisableAccording to EN/ISO 707
Sampler scratchers, stainless steel V4A
For sampling cohesive, caked and not free-flowing substances.Food-safeAutoclavable
Sampler Silo Drill, aluminium or stainless steel V2A
If bulk goods are transported over long distances (e.g. in trucks, railway goods wagons), separation may occur. Taking the sample just from the surface therefore leads to the wrong result. Representative samples from all layers of the silo can be taken with the SiloDrill. The SiloDrill fits through all standard openings with its diameter of 90 mm.Standard length 150 cm, extendable in increments of 100 cm, max. 350 cmScraper edge for cohesive substancesDrill tip with drilling blades for easy boring
Sampler SiloPicker, stainless steel V4A
For taking bulk good samples from silos. Using the extension rods, samples can be taken from depths down to 3.5 m.Food-safeAutoclavable