Disposable scoops LaboPlast® Bio / SteriPlast®Bio, Green PE
White. They are ideal for sampling of powder, granules and pastes. The LaboPlast® Bio / SteriPlast®Bio products are entirely made of renewable resources. Not only with regard to quality but also with regard to its characteristics for high-quality sampling, it is perfectly comparable with conventional polyethylene.Individually packedSteriPlast® Bio additionally gamma-sterilizedProduction, assembling and packaging acc. to Cleanroom class 7 (10000)According to EU food and FDA guidelines
Disposable spatulas for foodstuffs SteriPlast®, PS
Blue. As a result of the long, ergonomically-shaped, stable handle and a sharp blade, it is possible to even penetrate directly into containers such as paper or plastic sacks. The spatula for foodstuffs is ideal for sampling powders, granulates and pastes.The shade of blue that is used does not occur in a natural form in foodstuffs. Because of this, the spatulas or parts of them can be quickly found and easily identified in a visual check if they are ever mixed into production. The detectable spatulas have a special additive in the material that makes them visible to metal detectors or X rays. They can therefore be rejected with standard systems for checking for foreign objects, even though they are made of plastic.Individually packed, gamma-sterilizedProduction, assembling and packaging acc. to Cleanroom class 7 (10000)According to EU food and FDA guideline
Disposable spatulas LaboPlast® Bio / SteriPlast®Bio, Green PE
White. Due to their long, ergonomic and solid handles and pointed blades they can be easily pierced into paper and plastic bags. The spatulas are ideal for sampling of powder, granules and pastes. The LaboPlast® Bio / SteriPlast® Bio products are entirely made of renewable resources. Not only with regard to quality but also with regard to its characteristics for high-quality sampling, it is perfectly comparable with conventional polyethylene. Individually packedSteriPlast®Bio additionally gamma-sterilizedProduction, assembling and packaging acc. to Cleanroom class 7 (10000)According to EU food and FDA guidelines
Disposable spatulas, PS, with sheath
White. Due to their long, ergonomic and solid handles and pointed blades they can be easily pierced into paper and plastic bags. The spatulas are ideal for sampling of powder, granules and pastes. The spatulas are also available with a transparent sheath to close them immediately after the sampling procedure to secure a sterile and contamination-free sample.Individually packedProduction, assembling and packaging acc. to Cleanroom class 7 (10000)According to EU food and FDA guidelines
Disposable spatulas, PS, without sheath
White. Due to their long, ergonomic and solid handles and pointed blades they can be easily pierced into paper and plastic bags. The spatulas are ideal for sampling of powder, granules and pastes. Individually packedProduction, assembling and packaging acc. to Cleanroom class 7 (10000)According to EU food and FDA guidelines
Drill heads for carcass sampling
The samplers can be used in the punch process to remove a circular sample of tissue of 5 cm² from the surface. They are suitable for carcass sampling, in histology, in cheese factories and in the food and luxury items industries.The drill head has a hexagonal socket for bit holders or chucks, suitable for all commonly used cordless screwdrivers or drilling machines. The sharp cutting edge made of stainless steel makes it easy to cut out sample pieces. A hole in the crown prevents air compression and is also used to eject the samples.According to DIN EN ISO 17604:2015-12Food-safeAutocavable
Emptying device, stainless steel
Emptying zone samplers were often a matter of patience and a steady hand. Now it's easier and faster with Bürkle's emptying device. Just lay the zone sampler onto the stainless steel stand, adjust the funnels along the sample chambers, and, after turning the sampler, the media will directly flow into the containers below. Quality materials ensure that the emptying device is autoclavable.
Extendable Pole
Designed for use with the Neogen® Sponge Stick for easier sampling of remote and hard-to-reach areas.Lightweight, extendable rod, robustEnables samples to be taken safely from ceilings and tanks
Fiber glass telescopic pole INGENIOUS
Very robust telescopic pole, ideal for sample taking. Fiber glass makes it almost indestructible and non-corrosive. Comfortable to carry even at low temperatures. Simple extension and adjustment mechanism. You can change the length easily by a quarter rotation. (Pic. 3). At telescope poles of 3,85 to 6 m the length could be easily changed by using the clamp (Pic. 2). Comfortable use of spring mechanism. This type can take all samplers and catchers with universal connecting part. Easy exchange of the sample taking equipment by pressing the spring mechanism.
Filter bags Whirl-Pak®, PE, sterile
All the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33 mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. With write-on lable. Temperature range: -210 to 82 °C.
Filter bags Whirl-Pak®, PE, sterile, with round wire
All the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33 mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. With write-on lable. Temperature range: -210 to 82 °C.
Gas sampling tubes, DURAN® tubing
Gas sampling tubes, with two one-way stopcocks NS 14 (with retaining device), connections: capillary tube (outer dia. 8 mm, inner dia. 2,7 mm), glass olive (outer dia. 9 mm), with inscription label.
Gas sampling tubes, DURAN® tubing, with nozzle
Gas sampling tubes, with nozzle (with thread GL14 and septa), with two one-way stopcocks NS14 (with retaining device), connections: capillary tube (outer dia. 8 mm, inner dia. 2.7 mm), glass olive (outer dia. 9 mm), with inscription label.
Immersion Cylinders
For target spot and bottom samples of mineral oil products. Made of nickel-plated brass.Screw-off topWith handleHeavy design for fast loweringWithout lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.
Jumbo samplers
For sampling bulk goods of all types. Easy emptying with the emptying device. Lock seal close-it and close-it food & pharma please order separately.For coarse grains and larger quantities. With sample chambers separated by PTFE separators for multi point sampling from several predetermined sampling depths.
Liquid sampler MiniSampler, PE
Taking samples is quick, easy, clean and practical.With the MiniSampler, the sample liquid only comes into contact with the suction hose and the sample bottle. Cross contamination is largely prevented. Bottles can be tightly sealed immediately after the sample is taken with a tamper-evident cap.The single use, PE suction hose can be quickly replaced, ensuring that samples are never contaminated. A new hose can be used for each sample if required. Because of its small diameter (8mm) and flexibility the hose can reach sampling areas that are otherwise inaccessible. Also suitable for viscous oils.Scope of supply: 10 x 100 ml PE bottles, 10 m of PE suction hose (6 x 8mm), 1 hose cutter , 1 hose weight (V2A/nickel-plated brass), 20 seal-it safety seal labels, carrying case
Liquid sampler UniSampler with flexible sample tubing
UniSampler with PVC hose and hose weight made of stainless steel. For deep, hard-to-reach places. The mass of the metal tube drags the hose to any depth.PVC sample tubing, 2.5 m longIncl. 1000ml sample bottle, manual vacuum pump and adapter for sample bottle, V2A hose weight, 20 seal-it safety seal labels, supplied complete in carrying caseUniversal bottle adapter made of PVC, for bottle necks Ø 24 mm, 31 mm, 39 mm and 50 mm nominal dimension
Liquid-Sampler, single hand operation, stainless steel V4A (1.4404), open with thumb
Sampler for thin to viscous liquids. Easy use with one-handed operation. With discharge funnel for safe filling of sample bottles.
Liquid-Sampler, single hand operation, stainless steel V4A (1.4404), place onto bottle
Sampler for thin to viscous liquids. Easy use with one-handed operation. With discharge funnel for safe filling of sample bottles.
LLG-Sample containers, PP, Heavy Duty, with screw cap, HDPE
Ideal for liquid specimen collection, transportation and storage.Ideally suited for liquid histological samplesContainer made of non-cytotoxic polypropyleneVery solid qualityTop and bottom gripping assures easy opening and closing when wearing glovesHalf-transparency containersWith graduationWith labelLeak proofFor research and development only.